PDA

View Full Version : Applying VEIL: For first-timers



robert
05-08-2005, 05:37 PM
When you get your first container of VEIL, be sure to:

1.) Don't spill it :wink:
2.) Apply it in long, even strokes
3.) Apply it across the headlamp, not top to bottom
4.) I had better results with the flat edged foam applicator than the brush
5.) Don't spill it. :wink: :wink:
6.) Don't go over the same spot twice, it will be darker (but when applying side to side, you will have some drips--hitting this with your next stroke will be fine).
7.) If you get any on your paint/bumper, go ahead and wipe it off with a cloth
8.) Let it dry for several hours before driving and make sure not rain is forecast for the next 1-2 days.
9.) If applying it directly to a white license plate, it WILL be dark. It will wipe off before it's dry so you can test it out.

Anything I missed?

Hessen
05-08-2005, 05:44 PM
So HOW much did you end up spilling...... :?:

robert
05-08-2005, 05:48 PM
:lol:

I didn't spill any, but my idiot friend spilled his. :wink: Don't know HOW he spilled it where he did, but that's beside the point.

Also someone else here did, think it was happya$$ but not sure. :?:

edit: it was happya$$ and my buddy L33T_Hacksta. Check the first page of my "that stuff is dark" thread:

http://www.radardetector.net/Wow-that-stuff-is-dark--%3B-%29-1357t.php

brick
05-08-2005, 06:07 PM
Excellent list. :D

happya$$
05-08-2005, 06:34 PM
Yeah I was SO PISSED

sethy
05-09-2005, 12:10 AM
I think this one deserves a sticky for a while... thanks robert

Radar Roy
05-09-2005, 12:20 AM
One other suggestion (based upon an experience last week)

If you take your vehicle in for service at a shop that offers "free wash with service" tell them not to remove the VEIL from the headlamps.

This happened last week after I had an oil change with my Harley. The "bike wash kid" spent two hours with soap, water and pad getting the VEIL off. When I got my "sparkling" bike back, he told me of all his hard work. I told him about the VEIL costing $90.00 a pint, but still gave him a $10.00 tip.

leepoffaith
05-23-2005, 11:10 AM
Ok, this was the second time i've tried to VEIL my headlights and it's still streaky!! Better then the last time, but christ! I guess i'm just a perfectionist, but I can still see the streaks. Sethy, how much for you do VEIL my car? :lol:

nvr2fast
05-23-2005, 12:15 PM
One other suggestion (based upon an experience last week)

If you take your vehicle in for service at a shop that offers "free wash with service" tell them not to remove the VEIL from the headlamps.

This happened last week after I had an oil change with my Harley. The "bike wash kid" spent two hours with soap, water and pad getting the VEIL off. When I got my "sparkling" bike back, he told me of all his hard work. I told him about the VEIL costing $90.00 a pint, but still gave him a $10.00 tip.

You can't blame the kid. For all he knows, its some crud you got on your headlamp that he is trying to get off, not some high tech laser absorbing material :wink:

Cudos for giving him a tip for his "hard work" hehe :P

robert
05-23-2005, 07:20 PM
Ok, this was the second time i've tried to VEIL my headlights and it's still streaky!! Better then the last time, but christ! I guess i'm just a perfectionist, but I can still see the streaks. Sethy, how much for you do VEIL my car? :lol:

Sethy used a larger sponge than came with the VEIL to get a more even application.

SmaartAasSaabr
05-23-2005, 09:38 PM
What happens if you are applying VEIL to some POS car that has the "bumps" on the light so people don't put headlight wipers on? (I don't)

crazyVOLVOrob
05-23-2005, 10:38 PM
What happens if you are applying VEIL to some POS car that has the "bumps" on the light so people don't put headlight wipers on? (I don't)My 190e had those bumps but the headlight wipers were stock i always wondered why?

nvr2fast
05-24-2005, 03:28 AM
Ok, this was the second time i've tried to VEIL my headlights and it's still streaky!! Better then the last time, but christ! I guess i'm just a perfectionist, but I can still see the streaks. Sethy, how much for you do VEIL my car? :lol:

Sethy used a larger sponge than came with the VEIL to get a more even application.

Mmm... a larger sponge? You mean like those ones you use in the shower, or something different?

robert
05-24-2005, 05:39 AM
I was looking for the word "foam" but typed "sponge" instead. :oops: Here's his quote on the "Pictures" thread (in this forum):


I actually used some foam that my computer came packed with. Its like the foam brush, only bigger so I can do more at once.

http://www.radardetector.net/Pictures...-1566t.php

Veil Guy
05-24-2005, 07:59 AM
FYI,

We are adding an additional larger foam applicator to our packaging.

We have found that when used on plate covers and/or large light housings that the coating is easier to go on smoothly.

Veil Guy 8)

happya$$
05-24-2005, 08:03 AM
Great idea Bob.

Veil Guy
05-24-2005, 08:37 AM
We owe this to guys like you and Sethy who are actually using VEIL in the field.

My thanks to all y'all for sharing your experiences with us. We only want to make [all aspects of] the product better as we go foward!

Veil Guy 8)

nvr2fast
05-24-2005, 01:25 PM
Mmm okay, but i guess if I buy it now, it doesn't come with the fancy new big foam applicator, right?

When will it be released?

Oh... and is there a difference between different "Veil" versions? If I buy now, what should I look out for to ensure it is the "latest revision"?

Veil Guy
05-24-2005, 01:47 PM
The current products have a 1" foam applicator in addition to a 1" brush.

The next package released will have a 1" and 2" foam applicator.

Veil Guy 8)

robert
05-25-2005, 05:46 AM
i'll head down to pick up a 2" foam applicator. my outback lights are pretty big. :D