PDA

View Full Version : Photocopied plates method Tested w/ pics



jackenloper
05-30-2005, 01:19 AM
After speaking to a couple of people here and getting some help, i decided to use the photocopying method in order to reduce the retroreflective surface of the plates and to make them more stealthy.

I have documented some tests and have included before/after pictures on my site.

The great results are located at http://beam.to/stealth .

The photocopy plates, in my opinion worked well.

I really want to find out what the punch through is though....
can anyone test this?

Sethy...I know you are up for this, right? 8)
Chris, can you try this? Even though you do have a jammer.

thanks to Chris and spankyaf in advance for prior advice on the plates.

I have not yet covered the plates in veil yet... I will recieve veil in 2 week and then its veil time and i will update the pics and results.

Nothegger
05-30-2005, 02:09 AM
Thats pretty cool, thanks for the great work. :)

I just wonder if the LEO's could bother you if they noticed it. It probably wouldn't be so noticable during day, but at night...

jackenloper
05-30-2005, 02:15 AM
You got a good point.
I remember Sethy had a good excuse for this problem.
He said if they bother you about not having your real plates in the front, just tell the officer that the copy is used to protect your real plates from dirt and grime, since you are a big collector of license plates :D

crazyVOLVOrob
05-30-2005, 05:40 AM
happya$$ supposidly will be testing his replica plats which are made from plastic not metal...

JTW
05-30-2005, 05:50 AM
I'm selling my Kustom ProLaser for $999.99 if you want to test out the range.

Chris

spankyaf
05-30-2005, 09:06 AM
Good Job.. I like the idea of covering over the regular plates to keep the paper plate flat

happya$$
05-30-2005, 09:17 AM
I can tell you with a Veiled cover Laser Shield (both sides Veiled) you can not tell. I dont have the real license plate in the back of it. Basically the replica plate is a photocopied plate with a thick lamimant

jackenloper
05-30-2005, 04:27 PM
good stuff...
I still dont know whether i should get laser shield on the photocopied plates or if veil would be sufficient enough....

I wish i had 999 bucks to spend on this hobby :( .

411
06-04-2005, 09:49 PM
very clever idea and very well done on your site.

Got caught recenty ,June 05, in NY state , at 1040 feet by Lti Ultralite with

a car with no front license plate but without Veil , now I just

ordered it .Even the V-1 did not set of , probably the diode capter

was a bit hidden by the wiper arm ?

in any case , laser is a killer and the trooper like their toy.

soon everybody will be cooked by laser ?

stalker
06-09-2005, 06:08 AM
So if i photocopied my front plate and covered it with clear contact will that still reflect the laser???

If I have the real plate behind the photocopied one wont the laser still reflect??

My number plate is black and white so it is easy to photocopy...and I am doing a big road trip where laser is everywhere...so i might do it tomorrow, it would be awsome for somone to test the range with a laser....

nvr2fast
06-09-2005, 08:21 AM
Actually, wouldn't the PLASTIC that you use to cover the photocopied paper reflect the laser anyway?

The idea of the "laser shield" is to have a dull surface up front. You could theoretically use sandpaper and get some plastic and scratch it... to get a similar effect.

stalker
06-09-2005, 08:58 AM
yes that is what i was asking... I was more thinking of a way to protect the paper in case of rain.....

nvr2fast
06-09-2005, 10:22 PM
yes that is what i was asking... I was more thinking of a way to protect the paper in case of rain.....

You could just laminate the piece of paper. The laminate is plastic, and you're covering the paper with plastic anyway, so i dont see any disadvantage laminating it.

Falken_NY
06-09-2005, 11:37 PM
I was thinking of doing the same thing. I scanned in my license plate today and ordered a laser shield from radarbusters. Figure if i do that and use some type of silicone around the edge I'll be in good shape.
-Paul

jbird
06-09-2005, 11:48 PM
Depending on what kind of vehicle you have (in terms of large headlights, foglights, and chrome parts like a grill, bumper, or bush guard) a can of Veil would be a great idea for added protection especially if the jammer failed for whatever reason. BTW, the container goes a long ways. I did my headlights, turn signals, tail lights, and reflectors on my car and it looks like I hardly used any.

stalker
06-10-2005, 01:11 AM
ok did a copy of my plate...looks good, at least it may give me a few seconds between when he hits my plate to when he hits the headlights....

If i laminate it and dont use a laser sheild wont the laminate reflect the laser anyway?

Regis
06-10-2005, 01:32 AM
I doubt it will reflect anywhere near as much as a real plate even if it is laminated.

stalker
06-10-2005, 04:06 AM
yeah, well my palte is fitted...i asked my neighbor if he notices anything about my plate..he said ...what?? looks the same to me...whoo hoo

Falken_NY
06-10-2005, 08:27 AM
Stalker,
Did you laminate the copy?
-Paul

jackenloper
06-10-2005, 12:25 PM
I also wanted to try laminating the plate, but then I saw that it would give a bigger reflective surface than just paper with a regular plastic cover.

Here is my plan (once VEIL comes in 2 days)... I don’t even have a real plate cover as you see on my site.

Since I am a $$ saving dude. I decided to take two plexiglass covers, and just put the copy plate in between.

One problem with this setup is the rain right?
I think this can be solved by either using clear tape to tape up the sides of the covers and prevent rain from coming in. (this is messy though)

Another solution is to use a caulk gun and some silicone! Just silicone the holes that are exposed to the rain and you are safe from rain.

You can buy the plexiglass covers in any checker or auto parts store. They sell these right next to the plate covers ($3). I just prefer them because they look neater and from a distance it looks like you almost don’t have any plate covers.

Once I do this, I will take pictures of the whole silicone plate cover and post it on my site.

What do you guys think?

stalker
06-10-2005, 05:10 PM
no i didnt laminate it.....just put it on a cardboard backing....it looks like its going to rain now :(

mkirt007
06-16-2005, 10:47 AM
this is a great idea. :D it's also a cheaper and smarter solution. :o I forgot, is this the solution for laser or for photoradar (like red light cameras?) ???

1st of all, i live in NC, and they don't require a front tag, which leads me to believe the cops or troopers wont laser me unless its from my license plate in the back of my car.

i know by now, that it's very easy to get a reading on the headlights, which is why i am saving up for the VEIL. However, even after applying this coating to the headlights, and even the tailights, would this photocopy solution actually work against laser AND photoradar???

My car is a '98 Toyota Corolla that is royal blue, so its not as bright as white. I was considering to buy either a Laser diffusing cover or the Super Protector cover for the plate from Roy's website. But then I came upon this thread and got interested! :D

Has anybody already tested this idea? Does anyone think the regular covers are MORE or LESS effective that this cheaper solution??

thanks,
mkirt007

P.S. on the license plate...on the corner of the plate that has that small sticker or "tag" as some states call it that you get from the DMV every year...Suppose I make a copy of my plate with the current sticker. How am I supposed to keep my photocopy looking current if it is on paper without ripping anything, or having it look improper...and thus getting pulled over by a cop and then getting really F***ed over b/c they MAY notice the photocopy AND the late sticker for registration :!: ....Any thoughts :?:

stalker
06-16-2005, 05:23 PM
you said;

1st of all, i live in NC, and they don't require a front tag, which leads me to believe the cops or troopers wont laser me unless its from my license plate in the back of my car.


WRONG they will laser you all day everyday. If its not law to have a front plate then i wouldnt worry.


Well I did my test on the weekend with my Photocopied plate and guess what...it pissed down rain so i had to take it off...bummer.

stalker
06-22-2005, 08:28 AM
and yep it rained so i had to pull over and refit my real plate....lucky i never saw 1 cop anyway.

Cbr
06-23-2005, 04:48 PM
has anyone ever tried to copy a florida tag? they have special reflectors that appear when the light hits them, what do you do about those when photocopying them?

jackenloper
06-23-2005, 10:28 PM
We have the same type of thing in colorado with *special* license plates. they have a hologram that is visible at an angle but straight ahead you cannot see it....

I think the best thing to do for this is to take a picture of the plate at an angle with flash. use photoshop... paste the hologram on the plate picture, and do use a dim hologram.

Then print out the thing and hope the cops wont notice.. :wink:

Cbr
06-24-2005, 04:40 PM
Well with the florida tag, if you try to photocopy it, the hologram reflects during the photocopy, so when you scan it, the hologram is lit in the picture