View Full Version : Applying Veil to the plate, or the plate cover?
12secGT
06-06-2005, 01:04 PM
I ordered Veil to go along with my X50 AND I'm expecting delivery today, :D so I was wondering should I apply it directly to the license plate, or buy one of those clear plate covers and apply it to that? My plates are NYS issue which have the reflective coating. I've read that when you apply Veil to it the coating darkens the plate making it more obvious that there's SOMETHING on it, especially at night since now headlights and street lights won't aluminate it as it should. I will be applying it to the huge headlights on my Jetta, what about the rear plate/tail lights?
THANKS!
leepoffaith
06-06-2005, 01:09 PM
I would say put it on the plate cover. I feel that this is less obvious. If you are really looking to protect your plate, get a Laser Shield from Roy and coat one or both side with VEIL. You will definatly be good to go then. Whatever the case, great choices on the X50 and VEIL. You will be very happy with them.
brick
06-06-2005, 01:20 PM
Definitely put it on the plate cover. If you put it on the plate it will be permanently stained purple. I had it on the plate directly for about a day and it's still a little pink. If I get ticketed for my plate cover somewhere then so-be-it. I've got a laser shield on my to-buy list, which I think might be less obvious than what I'm currently using. (It's a little dark.)
The Veil directions state specifically that you should use a cover, coated front and back.
12secGT
06-06-2005, 02:14 PM
Thanks. I was thinking the same thing. I will buy a plate cover and coat both sides. Laser shield? This is good too? Where, on the rear plate?
I was thinking too that if for some reason I turned the plates in to DMV and they notice the coating, I could get in some shiznit over it. :shock: :?
leepoffaith
06-06-2005, 02:16 PM
Thanks. I was thinking the same thing. I will buy a plate cover and coat both sides. Laser shield? This is good too? Where, on the rear plate?
I was thinking too that if for some reason I turned the plates in to DMV and they notice the coating, I could get in some shiznit over it. :shock: :?
Look on Radar Busters for the Laser Sheild. It definatly helps to deflect/absorb the laser beam. With a good coat of VEIL on it, it works very well. It is similar to a cover, but it is a flat piece of plastic.
crazyVOLVOrob
06-06-2005, 03:02 PM
12sec GT i got put a light coating of VEIL directly to the plate this was only after my firneds father an officer informed me that plate covers are illegal in NY even thought everyone has them :lol: he said an A-hole cop would right you up for that, So his suggestion was directly to plate so if the officer makes you take the cover off the VEIL is still on the plate and you can say your plate is just dirty....that was his opinion...And to take the VEIL coating off just use windex
12secGT
06-07-2005, 07:23 AM
12sec GT i got put a light coating of VEIL directly to the plate this was only after my firneds father an officer informed me that plate covers are illegal in NY even thought everyone has them :lol: he said an A-hole cop would right you up for that, So his suggestion was directly to plate so if the officer makes you take the cover off the VEIL is still on the plate and you can say your plate is just dirty....that was his opinion...And to take the VEIL coating off just use windex
Really?? Plate covers are illegal in NY? Man. How did your plate come out? Can you post a pic?
Thanks for the input, man. :?
The laser shield used just by itself is fine. You don't need to put veil on the laser shield. If plate covers are illegal in your area you're going to draw alot of attention to yourself with a dark colored plate. Use veil for the headlights and use the laser shield for the license plate. The Shield isn't obvious at all.
Chris
crazyVOLVOrob
06-07-2005, 10:20 AM
Here are the pics:
1.Plate with no VEIL, and NO plate cover
http://memimage.cardomain.net/member_images/3/web/567000-567999/567917_168_full.jpg
2. Plate with no VEIL, with Laser Sheild
http://memimage.cardomain.net/member_images/3/web/567000-567999/567917_169_full.jpg
3. Thick coat of VEIL vs NON-Veiled plate(i didn't use the plate cover with plate like that)
http://memimage.cardomain.net/member_images/3/web/567000-567999/567917_170_full.jpg
4.Light VEILed Plate vs NON-VEILed
http://memimage.cardomain.net/member_images/3/web/567000-567999/567917_171_full.jpg
5. Light VEILed, no plate cover
http://memimage.cardomain.net/member_images/3/web/567000-567999/567917_172_full.jpg
6.Light VEIL, with Laser Sheild
http://memimage.cardomain.net/member_images/3/web/567000-567999/567917_173_full.jpg
------------------------------------------------------------------------------------
In the picture the front of my car, the headlights and grill have also been VEIL treated
12secGT i have never seen an officer shooting laser at the rear so i'd say you should be fine if you don't treat the rear
\\/Picture of VEIL on my passenger headlight(light on the left)\\/
http://memimage.cardomain.net/member_images/3/web/567000-567999/567917_174_full.jpg
I have yet to notice a different in the light output (with or without VEIL) just so all you know
crazyVOLVOrob
06-07-2005, 10:22 AM
The laser shield used just by itself is fine. You don't need to put veil on the laser shield. If plate covers are illegal in your area you're going to draw alot of attention to yourself with a dark colored plate. Use veil for the headlights and use the laser shield for the license plate. The Shield isn't obvious at all.
ChrisThey are illegal but not enforced and the main concern against the plate covers is photo radar my friend father told me when i asked him.
As long as your not rock a licence plate like Happy's you should be fine in NY
jbird
06-07-2005, 10:30 AM
Cool pictures. Your end result looks pretty good and inconspicuous unlike a ridiculously dark plate cover coated with way too much Veil. Nice job.
Nothegger
06-07-2005, 10:37 AM
Thanks for the pics Volvo! If you veil the plate it looks pretty obvious, as if it was covered in engine grease or something. Maybe if you coated the laser shield with VEIL instead of the plate it would look better. I think becouse plate is retroreflective and so bright it makes it more obvious when VEILed, then when VEIL is aplied to clear cover.
crazyVOLVOrob
06-07-2005, 10:44 AM
the only pictures where the flash was use was the ones showing the non VEILed plate with out plate cover and with plate cover....
In NY after speaking to a friends father who is an officer of the law he suggested directly to the plate if i want to run this plate cover cause plate covers are illegal in NY and he said if the officer wanted to fine me for that i could take off the cover and still be protected by VEIL somewhat :lol: I don't waht the plate cover obvious and if that was treated it would be a dead give away
It would still be the same darkness.... this was tried on my friends truck which is now in VT so i can't get any pics
Nothegger
06-07-2005, 11:10 AM
Maybe so, you've worked with VEIL and I haven't, so I guess you'd know better. I only mentioned it becouse when I look at pictures of VEILed headlights, especially if it's a good job like Sethy's, it's almost impossible to notice any difference looking at the headlights. On the other hand anytime someone applied VEIL directly to the plate, even a light coat, it made it look very obvious. I haven't seen it in real life, only on pictures, but it seems to me that VEIL works best applied to transparent surfaces. Just seems to me that way.
nvr2fast
06-07-2005, 11:20 AM
Great pix crazyVOLVOrob... this is the real subtance, having side-by-side comparison pix :D
12secGT
06-08-2005, 07:38 AM
Here are the pics:
1.Plate with no VEIL, and NO plate cover
http://memimage.cardomain.net/member_images/3/web/567000-567999/567917_168_full.jpg
2. Plate with no VEIL, with Laser Sheild
http://memimage.cardomain.net/member_images/3/web/567000-567999/567917_169_full.jpg
3. Thick coat of VEIL vs NON-Veiled plate(i didn't use the plate cover with plate like that)
http://memimage.cardomain.net/member_images/3/web/567000-567999/567917_170_full.jpg
4.Light VEILed Plate vs NON-VEILed
http://memimage.cardomain.net/member_images/3/web/567000-567999/567917_171_full.jpg
5. Light VEILed, no plate cover
http://memimage.cardomain.net/member_images/3/web/567000-567999/567917_172_full.jpg
6.Light VEIL, with Laser Sheild
http://memimage.cardomain.net/member_images/3/web/567000-567999/567917_173_full.jpg
------------------------------------------------------------------------------------
In the picture the front of my car, the headlights and grill have also been VEIL treated
12secGT i have never seen an officer shooting laser at the rear so i'd say you should be fine if you don't treat the rear
\\/Picture of VEIL on my passenger headlight(light on the left)\\/
http://memimage.cardomain.net/member_images/3/web/567000-567999/567917_174_full.jpg
I have yet to notice a different in the light output (with or without VEIL) just so all you know
Thanks for the pics Crazy. It definitely shows a difference between them. Do they really enforce the plate cover thing in NYC? Is it illegal in NJ and PA too?
brick
06-08-2005, 08:55 AM
I just got my Laser Shield yesterday. I tried to put a light coat of Veil on it but it came out darker than expected so I didn't keep it. I think that the texture of the cover causes it to soak up the Veil really well. I'm sure it would be effective, but a bit more obvious than I'd like. The Laser Shield looks like it should do a decent job by itself, though.
I think that another way to get Veil in there would be to coat a piece of transparency film on one side and fasten it between the plate and the cover. The smooth plastic ought to allow for a lighter veil coating. Might crack if it flexes, though.
I just got my Laser Shield yesterday. I tried to put a light coat of Veil on it but it came out darker than expected so I didn't keep it. I think that the texture of the cover causes it to soak up the Veil really well. I'm sure it would be effective, but a bit more obvious than I'd like. The Laser Shield looks like it should do a decent job by itself, though.
I think that another way to get Veil in there would be to coat a piece of transparency film on one side and fasten it between the plate and the cover. The smooth plastic ought to allow for a lighter veil coating. Might crack if it flexes, though.
Make sure the rough side of the laser shield is not up against the plate.
brick
06-08-2005, 09:33 AM
Make sure the rough side of the laser shield is not up against the plate.
Thanks for the heads-up. The roughest side is facing out, and the less-rough side is up against the plate.
nvr2fast
06-08-2005, 09:55 AM
I just got my Laser Shield yesterday. I tried to put a light coat of Veil on it but it came out darker than expected so I didn't keep it. I think that the texture of the cover causes it to soak up the Veil really well. I'm sure it would be effective, but a bit more obvious than I'd like. The Laser Shield looks like it should do a decent job by itself, though.
I think that another way to get Veil in there would be to coat a piece of transparency film on one side and fasten it between the plate and the cover. The smooth plastic ought to allow for a lighter veil coating. Might crack if it flexes, though.
I dont know about where you are, but the cops would definitely pull me over if my plates were as dark as some ppl's here.
The laser shield is already supposed to help with laser, so i dont see a real big advantage to putting double coats of Veil on it as well.
EastGermanOlympicJudge
06-08-2005, 10:01 AM
Make sure the rough side of the laser shield is not up against the plate.
I'm really not convinced this was ever satisfactorily answered with any authority besides a guess. (http://www.radardetector.net/Veil-on-Laser-Shield-1919t.php) Seriously.
12secGT
06-08-2005, 10:05 AM
I just got my Laser Shield yesterday. I tried to put a light coat of Veil on it but it came out darker than expected so I didn't keep it. I think that the texture of the cover causes it to soak up the Veil really well. I'm sure it would be effective, but a bit more obvious than I'd like. The Laser Shield looks like it should do a decent job by itself, though.
I think that another way to get Veil in there would be to coat a piece of transparency film on one side and fasten it between the plate and the cover. The smooth plastic ought to allow for a lighter veil coating. Might crack if it flexes, though.
Transparancy film might be too thin and actually dissolve since Veil is alcohol based.
brick
06-08-2005, 10:23 AM
Transparancy film might be too thin and actually dissolve since Veil is alcohol based.
Hmm...I guess there's only one way to find out! I'll try to put a light coat on some tonight to see what happens. I doubt the film would actually dissolve but I question how well it would hold up with handling and use. For that matter, I don't even know if I can get it as thin as I would like. But it's worth a shot for the sake of knowing.
crazyVOLVOrob
06-08-2005, 11:57 AM
Thanks for the pics Crazy. It definitely shows a difference between them. Do they really enforce the plate cover thing in NYC? Is it illegal in NJ and PA too?
I don't think they are really enforced unless you are pulled over for another reason and the cop notices... the most obvious noticeable plate cover is on the rear not the front. Drive around NY and you will see plenty of people with plate covers so they aren't really enforced.....However if you are using a photo blocker plate cover they might have a problem....
I doubt the the they will have a problem with Laser Sheild...If you are that worried, just put the laser sheild on the front plate and not put any VEIL on the plate or cover
crazyVOLVOrob
06-10-2005, 03:24 PM
Make sure the rough side of the laser shield is not up against the plate.
I'm really not convinced this was ever satisfactorily answered with any authority besides a guess. (http://www.radardetector.net/Veil-on-Laser-Shield-1919t.php) Seriously.I was looking at plate covers today and with the photoblocker plate covers to work the rough side must be in and to difuse the laser beam the laser sheild the rough side must be out
I go the instructions sheet from On-track the producer of the laser sheild and they say the rough side goes out
EastGermanOlympicJudge
06-11-2005, 04:27 PM
I got the instructions sheet from On-track the producer of the laser sheild and they say the rough side goes out
Thanks. This is exactly the kind of info I needed to see. I just went outside and flipped my Laser Shield around. :)
brick
06-11-2005, 04:44 PM
I finally got around to doing a little section of transparency film. Veil doesn't do any harm to it and it's surprisingly pliable, indicating that it would actually hold up pretty well under use. It was still darker than I would like but then again my technique for applying it isn't all that great. For someone who has excellent Veil application skills, doesn't care about a plate that's a little darker, and doesn't trust the laser shield alone, the transparency film thing seems like a plausible option.