PDA

View Full Version : Blinder - Cheetah Install



Radar Roy
12-19-2006, 10:11 AM
We just completed our first Cheetah - Blinder install.

We have the photos here:
http://www.radarroy.com/archives/34

kpatz
12-19-2006, 12:23 PM
One question - if you had Blinder heads mounted front and rear, would this work with a Cheetah? If you put the Blinder control box under the hood, you would still need to pass the rear heads' line(s) through the firewall, right?

RacerX
12-19-2006, 12:36 PM
yeah, unless you did a separate box at the rear, you would need to get the heads to the front black box somehow.

kpatz
12-19-2006, 12:47 PM
What's the potential risk of someone coming out with a Cheetah detector for LEOs to use in jammer-illegal regions? Obviously it's wireless, so it transmits a signal. Is it a proprietary signal/frequency or is it industry standard such as WiFi or Bluetooth?

RacerX
12-19-2006, 01:27 PM
hmmm... good question. :idea:
i doubt it would be an issue, due to cost to make a unit, and get LEO's to buy it for just that.
it's not bluetooth, it's WiFi of some kind., not sure of freq. off hand.

i'll check. my guess is it falls within other areas, so it would be hard to find in the background noise.

i could see a big antenna on the LEO's dash.

it's a Cheetah/STI/Navalert/Radar detector/Cell phone antenna. :lol:

allyoops
12-20-2006, 01:42 PM
Zero risk.

We use a short range radio frequency that's industry standard for automotive applications pretty much all around the world. (433 MHz)

There are so many other automotive uses for the standard, any such imaginary detector would be a completely unusable product. It would be alerting every time somebody opened a car door with their remote key-fob and would drive the user nuts with falses. :lol: Some cars now even have wireless tyre pressure sensors which use the same frequency to communicate with your dash display.

Theoretically I guess it's possible - anything is possible! But in practical terms it just ain't going to happen. No RDD manufacturer would waste their time.

allyoops
12-20-2006, 01:45 PM
Kpatz, forgot to say - good question! I liked the way you were thinking about the product.

allyoops
12-20-2006, 02:01 PM
Roy,

Just read your report on the Blinder instal. Nice job - shows how easy it is for anyone to do. Makes it ideal for lease cars as well because there's no trace when you remove the Blinder to hand the car back.

Now we'll need to see if anyone out there can beat your time! :)

Congratulations on your first Cheetah sale.

stalker
12-21-2006, 05:45 AM
Now we'll need to see if anyone out there can beat your time! :)

Congratulations on your first Cheetah sale.

im willing to have a go ;)

spankyaf
12-22-2006, 06:39 AM
Lets see Vizalert, jammer, laser kit for car..... maybe I should open an account with Roy

SmaartAasSaabr
12-22-2006, 10:07 AM
Zero risk.

We use a short range radio frequency that's industry standard for automotive applications pretty much all around the world. (433 MHz)

There are so many other automotive uses for the standard, any such imaginary detector would be a completely unusable product. It would be alerting every time somebody opened a car door with their remote key-fob and would drive the user nuts with falses. :lol: Some cars now even have wireless tyre pressure sensors which use the same frequency to communicate with your dash display.

Theoretically I guess it's possible - anything is possible! But in practical terms it just ain't going to happen. No RDD manufacturer would waste their time.

Hmm... reminds me of the STI 432 MHz leak...

audia3quattro
01-16-2007, 11:12 PM
does this kit work for the lidatek le-30, because it says in bold for the m-20x
http://www.radarbusters.com/products/cheetah/default.asp

crazyVOLVOrob
01-17-2007, 12:55 AM
There is a cheetah kit for the lidatek...Wait for RacerX or Roy to tell you if they got a lidatek kit for your purchase

proudNMAmember
02-21-2007, 01:32 PM
I need a blinder/cheetah setup for a semi truck. Could this be possible? When will their be a kill switch coming out for this setup? I will need one for driving in states where they are illegal.

allyoops
02-22-2007, 04:30 AM
There isn't a remote kill switch option for the wireless fitting kits. If your in an area where you don't want to JTG, or you want to have a manual switch, just use the Blinder system on it's own. Go with an M40 on an SUV.

When ActiveStealth Pro is available (the Windows Mobile software and the SMARTnode 3-in-1 Antenna) you will be able to remotely switch Blinders on and off in two seperate ways.

The Fire Control feature lets you choose how long you want your Blinders to fire from a range of preset time limits in a drop-down menu and then it will automatically shut the Blinder system off. You can then choose to switch it back on again after 30, 45 or 60 seconds.

Alternatively you can select a Stealth Speed setting from a range of speed limits in another drop down menu. Your Blinders are switched on when you go above the Stealth Speed setting and then switched off again whenever your car drops below it. There is a quick change feature for Stealth Speeds as well.

The software is almost ready for release - just going through last minute bug fixing and Beta testing etc. 3-in-1 SMARTnode will be along soon after it.

A

nomad
02-22-2007, 10:43 AM
Alternatively you can select a Stealth Speed setting from a range of speed limits in another drop down menu. Your Blinders are switched on when you go above the Stealth Speed setting and then switched off again whenever your car drops below it. There is a quick change feature for Stealth Speeds as well.

Ally, can you just confirm that the stealth speed is tied to the speed limit obtained from the GPS receiver? i.e. if you're in a 40 zone, fire control switches on your detector/jammer at say 42 (if you've set it to activate at PSL + 2mph) and as you move into a 60 zone fire control activates your kit at say 62?

proudNMAmember
02-22-2007, 02:25 PM
So it's almost out then?

Windstorm
05-13-2007, 08:47 AM
Will the activestealth pro show the tech display from a STi on the PDA?

RacerX
05-14-2007, 12:53 PM
No.
it'll just give the band and alert strength.
since it pulls the alerts from the audio output of the detector, it has no way to determine frequency.