View Full Version : Veil + Plexiglass + laser shield
brick
06-21-2005, 04:57 PM
I just want to say that applying Veil to a piece of plexiglass works SO much better than applying it directly to the laser shield. I've never seen such an inoccuous coating. I just used a 2" foam brush and did it right on my table. All the minor streaks have evened themselves out nicely. I'm really going to have to take pictures once I put it on the car...I have a feeling it's going to be great. I wish I could find clear headlight covers for my car so I could do them the same way! Nobody makes them, though.
**EDIT**
Since I hate to be a tease:
http://img228.echo.cx/img228/8206/img01340dn.th.jpg (http://img228.echo.cx/my.php?image=img01340dn.jpg)
http://img228.echo.cx/img228/8950/img01356mh.th.jpg (http://img228.echo.cx/my.php?image=img01356mh.jpg)
jackenloper
06-21-2005, 05:37 PM
you beat me to the punch. I was also gonna post pictures of my modified license plate tests which have included plexiglass and a photocopied license plate. I hope to post the pics and experiments up on the web later this week.
brick
06-21-2005, 06:12 PM
Good stuff. Now all we have to do is some testing. Wish I had a bunch of money sitting around for a ProLaser.
robert
06-21-2005, 06:37 PM
Good stuff. Now all we have to do is some testing. Wish I had a bunch of money sitting around for a ProLaser.
how far is it to ohio or michigan for you? you could go hang with happya$$ since sethy's at SML. :twisted:
thanks for posting the pics. i got a bigger foam applicator for the VEIL just need to reapply it. there's a ton in that can!
brick
06-21-2005, 07:04 PM
how far is it to ohio or michigan for you? you could go hang with happya$$ since sethy's at SML. :twisted:
thanks for posting the pics. i got a bigger foam applicator for the VEIL just need to reapply it. there's a ton in that can!
Oh, yeah. I have absolutely no idea how many times I've applied Veil to my car (including my countless failed experimental application methods) and I still have half a can left. I think I'm getting to the point where I will be satisfied with my application, too!
My other experiment, which seems to be working, is to apply Veil to contact film and then apply that to my headlights. I'm planning two layers of Veil-ed film and then one last sheet on top of it all just to protect it from all the flying debris/headlight wipers. I have the first set of films on there now and I'm going to apply the second tomorrow once everything is thoroughly cured. Bubbles are my enemy, but the streaks are gone!
holein1
06-21-2005, 08:05 PM
I just want to say that applying Veil to a piece of plexiglass works SO much better than applying it directly to the laser shield. I've never seen such an inoccuous coating. I just used a 2" foam brush and did it right on my table. All the minor streaks have evened themselves out nicely. I'm really going to have to take pictures once I put it on the car...I have a feeling it's going to be great. I wish I could find clear headlight covers for my car so I could do them the same way! Nobody makes them, though.
**EDIT**
Since I hate to be a tease:
http://img228.echo.cx/img228/8206/img01340dn.th.jpg (http://img228.echo.cx/my.php?image=img01340dn.jpg)
http://img228.echo.cx/img228/8950/img01356mh.th.jpg (http://img228.echo.cx/my.php?image=img01356mh.jpg)
Hey just curious as to where you got the plexiglass & how thick is it?? I think I might give it a go if I can find some :D
brick
06-21-2005, 08:13 PM
I got it at Home Depot. The labels says 0.093 inches thick, and I got an 11x14 sheet which is just about right to cut out a single cover for a North American-spec plate. Cost about $2.50. The tricky part is the holes, which I did just now with my Dremel knock-off.
holein1
06-21-2005, 08:40 PM
I got it at Home Depot. The labels says 0.093 inches thick, and I got an 11x14 sheet which is just about right to cut out a single cover for a North American-spec plate. Cost about $2.50. The tricky part is the holes, which I did just now with my Dremel knock-off.
Hey thanks I was just looking on ebay and there are quite a few listing for plexiglass but none seem to be the right size or thickness so I guess I'll give good ol' home depot a try. :)
crazyVOLVOrob
06-21-2005, 08:57 PM
Brick for headlight covers for the s70 try...iPd or EuroSport tuning
robert
06-22-2005, 05:31 AM
I wonder if the reflectivity of the film will cause a problem? Doubt it's reflective enough.
What kind of film did you get? I think you and I are having the same issues with our glass headlights. I'll reapply using the larger foam applicator this wknd and let everyone know.
brick
06-22-2005, 06:39 AM
I think that the stuff I'm using is actually meant to protect things like glass shelves. (Again, bought at Home Depot...I'll check on its actual name for you after work.) I'm not sure how long it will last but it seems really sticky when I apply it to the headlights. I guess I'll have to wait and keep an eye on it.
I definitely share your concern about the reflectivity of the film. I don't think that it's actually going to contribute a reflection but it's hard to be sure. Maybe the thing to do is leave off the outer layer of film, allowing the top coat of Veil to degrade, but not worrying about it since the inner coat is still there?
I wish I had a way to test this! What do you guys think about using one of those Osprey range finders as a tester? I suppose I could tell by the maximum range detected with the different configurations?
stalker
06-22-2005, 08:11 AM
maybee somone will hire their rangefinder to you.
brick
06-22-2005, 08:23 AM
Maybe :shock: . Or I could just buy one outright. What do they cost, $150?
stalker
06-22-2005, 08:28 AM
hmm...theres a thought, does it also show speed?? or just range??
brick
06-22-2005, 08:51 AM
The Osprey shows both, which makes it unique. I've seen lots of others that just do range.
stalker
06-22-2005, 08:56 AM
cool, i want one...
brick
06-22-2005, 09:19 AM
I did a search, they're around $200. Maybe later this summer.
On a different note, I have a decision to make on how to configure the laser shield and plexiglass. Option A is to put the plexiglass on the plate, Veil-side out, and put the lasershield on top of it. Option B is to put the Laser Shield on the plate, and then put the plexiglass on top of that with the Veil side toward the plate. Option C is something else.
I would like to use Option B because it's easier to read the plate with the laser shield right up against it. However, I want the most effective configuration possible. Any optics experts out there want to take a crack at what makes the most sense? Or if it makes any difference at all?
brick
06-22-2005, 05:39 PM
Ok, everything is now on the car. I played around with the plate and I decided to make a compromise. The lasershield is right next to the plate so as not to obscure it and the plexiglass is outside of the laser shield. Thing is, the Veil side is facing out because I don't know how the plexiglass behaves in IR. For all I know it's totally transparent, but I can't be sure. Anyway it looks pretty good. It darkens the plate slightly but it's still way better than my original double-veiled cover was. It's also way lighter and more even than when I tried to put veil directly on the laser shield. The numbers are 100% visible which is what my state laws dictate.
I have the plastic film on the headlights, too. I may revert to only one coat because I really don't like how dark they are. The last thing I want to do is attract attention, and Veil Guy has repeatedly said that one coat is good enough for lights. We'll see, though. I'll drive around with it for a little while and make a decision later. I'll post pics for you guys, too.
kap1027
06-22-2005, 06:34 PM
i got plexiglass from lowes today to try.... its so streaky on mine! maybe im just super retarded.... but its REALLY streaky.... what should i do? i put it on one side of my lasershield (which im prolly gonna windex off if i can get this right), and it wasnt this streaked.... neither are my head lights.......stop the pain.... stop the madness.... its driving me INSANE!!!!!! :evil: :evil: :twisted: :twisted: :evil: :evil:
http://community.webshots.com/photo/366998819/376501236xwBExK
check it out....
brick
06-22-2005, 07:06 PM
Yeah, that's crazy streaky. What did you use? A 2" foam applicator worked for me. I just used long, slow strokes (yikes) and let the Veil even itself out. If the foam is too dry it will come out streaky, too. It looks like yours was done with a bristle brush. Am I wrong?
kap1027
06-22-2005, 09:03 PM
i DID use the 2" foam brush.... thats whats so puzzling..... i used long slow even strokes and it still didnt work.... bout to try on another piece of plexi (got a few pieces still).... i'll let ya know how it works out
robert
06-22-2005, 09:32 PM
i DID use the 2" foam brush.... thats whats so puzzling..... i used long slow even strokes and it still didnt work.... bout to try on another piece of plexi (got a few pieces still).... i'll let ya know how it works out
don't put too much on the brush and don't push too hard.... also don't go over the same area twice. also put it on a slight incline, don't lay it flat. that will allow the over-applied VEIL to run down some, and you'll hit it with the next pass of the applicator.
kap1027
06-22-2005, 09:44 PM
i was applying too much pressure i guess..... but thats the only thing i can think of im doing wrong.... how can i "make" and incline so it can drip down when i do it on the plexi? this time i did it the veil sort of "puddled".... there were like little spots all over that had no liquid.... its a LITTLE bit better..... might post pics later..... guess i'll have to give it ANOTHER try tomorrow.... only got a half a can left :cry:
robert
06-22-2005, 09:48 PM
put it on some wood, and put some nails across the bottom to hold the plexi to it so it won't slide. think of those old school desks that aren't level but raised for writing.
something like this:
http://tinyurl.com/7dys3
kap1027
06-22-2005, 10:58 PM
ok i think i can do that.... now.... when i try this again tomorrow.... i should put the first brush stroke on top, moving horrizontally, right? and put the next brush stroke directly under it, right? now, if its really streaky the first time i brush it on, dont go over it, right? but then its streaky..... and if i go over it again, its still streaky.....ugh i hate being dumb.... i wish i could be as good as Sethy, he is "the Master of all that is Veil"
*sigh*
stalker
06-23-2005, 04:43 AM
geez it looks too dark...is this how it looks dry??
robert
06-23-2005, 05:19 AM
ok i think i can do that.... now.... when i try this again tomorrow.... i should put the first brush stroke on top, moving horrizontally, right? and put the next brush stroke directly under it, right? now, if its really streaky the first time i brush it on, dont go over it, right? but then its streaky..... and if i go over it again, its still streaky.....ugh i hate being dumb.... i wish i could be as good as Sethy, he is "the Master of all that is Veil"
yes, go horizontally the long way across the area. if you've got it on an incline the next brush stroke should go just along the edge of the previous one, which will prevent overlap and allow the applicator to catch any that runs down. if you're using light coats and light pressure it should not be too streaky, and being on the incline (which you may need to adjust depending on your application) should allow gravity to help reduce the streaks.
definitely takes some practice and at $90 a can it's tough to want to do it that way but you'll get it.
:D
brick
06-23-2005, 06:59 AM
i was applying too much pressure i guess..... but thats the only thing i can think of im doing wrong.... how can i "make" and incline so it can drip down when i do it on the plexi? this time i did it the veil sort of "puddled".... there were like little spots all over that had no liquid.... its a LITTLE bit better..... might post pics later..... guess i'll have to give it ANOTHER try tomorrow.... only got a half a can left :cry:
You know, "puddles" make it sound like a surface tension issue. Could be that there's oil or other junk on the plexiglass that could be messing up your operation. If this is the case, it might do better after a good cleaning.
kap1027
06-23-2005, 09:41 AM
i thought about the oil thing, too.... but before i've ever put veil on anything i always windex it and wipe it down dry..... hopefully it'll all work out this time..... i gotta go to school and play video games, so i'll give it a shot later... thanks guys
kap1027
06-23-2005, 02:50 PM
http://community.webshots.com/photo/366998819/377111401meJBUN
the "clear" spots on the plate are light reflections, and it makes the other parts look darker..... the veil is even, just semi-streaky
thats the best veil job i could do.... sad lol..... its plate... lasershield (rough side out), then the plexi with the veiled side out..... not TOO bad, just looks like a dirty plate.... its better than having the veil on the lasershield. im sure sumone with better Veil-ing skills could improve on it.
brick
06-23-2005, 03:17 PM
Looks better! Veil is tricky but practice definitely pays off. I can't even tell you how many times I've applied it over the past few months before finally getting the technique down.
**Edit**
One tip that I just thought of is to make sure that whatever brush you use isn't hard from dried-on Veil. I find that a fresh one (or at least well-cleaned) produces the best results.