View Full Version : Setup Suggestions? Detector, Mounting & Earphone etc.
ES13Raven
03-31-2007, 08:19 PM
I'm going to install a Radar Detector on my GSX-R750, and I would like some suggestions.
For the detector:
I was thinking about picking up an original Passport 8500. I don't think the V1's arrows will work that great with me in the way, and I would have to buy the remote audio adapter. I can pick up an 8500 on FleaBay for under $150 and it should provide excellent protection. It does have a built-in earphone jack like the x50 right?
For the mounting bracket:
I guess my choices are THESE (http://www.radarbusters.com/products/accessories/motorcycles/mounts/mounts.asp?res=1). Are there pluses and minuses to each one, or are they just different?
For the earphone:
I don't want to spend a lot of money on earphones. What are some good ones that I can use with the 8500? It only needs to be 1 earpiece.
Also:
1. How do I hardwire the 8500 in? I have a direct wire kit, but where is the best place to tap power?
2. Will a tinted windscreen affect the 8500 much?
3. Is the Radar Cover (http://www.radarbusters.com/products/accessories/motorcycles/radar-cover.asp) worth the $25 if I'm not going to be riding in rain and the 8500 will be under the windshield?
FlyinZX-10R
03-31-2007, 09:21 PM
I have an original 8500 mounted on my 2006 zx-10r. Im using a mount i bought from Roy, though i dont remember the name/number for it. I have mine hardwired to my battery and just turn it on and off manually for now. I have the little remote box that is inline with the hardwire kit velcroed above my speedometer. I sometimes miss it during the day, but i can usually notice it at night. Its just my temp setup until the Vizalert is available. Ill probably switch to an RX65 at that time since Ka is the primary threat in my area from the HP. Pics are below
http://i138.photobucket.com/albums/q247/djice929/DSC01808.jpg
http://i138.photobucket.com/albums/q247/djice929/DSC01807.jpg
http://i138.photobucket.com/albums/q247/djice929/DSC01806.jpg
spankyaf
04-01-2007, 07:35 AM
The Techmount stuff is well made and a good value in my book. Just be aware of the clearances with your fairing with the mirror or control mounts.
The plastic case is probably worth it depending on your riding habits and level your level of cheapness. A baggie and an elastic band also works.
Tinting... might help or hurt... as Mike V states acts as sunglasses on sunny days but hurts on cloudy ones. I think the real dark tint that every body likes is bound to hurt regardless
Earphones.. I started cheap went custom and then ended up with Etymonics 6ris. You need small ones or the pressure points will kill you overtime. The Etymonics are comfortable and have good sound isolation also I switch over to MP3 and they work well. Of course there's also Vizalert
Wiring is pretty easy on a bike given the accessibiltiy of everything. I dont like to tap into existing wiring. If you plan to run more electrical accessories I would do this setup.
Obviously for the FJR but you could find mounting points on your bike as well
http://www.fjrtech.com/getdbitem.cfm?item=25
ES13Raven
04-01-2007, 03:11 PM
Im using a mount i bought from Roy, though i dont remember the name/number for it.
http://i138.photobucket.com/albums/q247/djice929/DSC01807.jpg
It looks like this one from Roy: http://www.radarbusters.com/products/accessories/motorcycles/mounts/product.asp?prodid=65
I think I like that one better. The "stem" mount ones look like they would block my speedometer and tachometer.
Nice setup btw...
bushpilot
04-04-2007, 10:45 PM
those ones "from radar roy" arent made by him...like
most stuff he sells...its made by someone else.
can you say tech mount dot com formally stem stands
AirMoore
04-05-2007, 09:34 AM
those ones "from radar roy" arent made by him...like
most stuff he sells...its made by someone else.
can you say tech mount dot com formally stem stands
Thank you. :lol:
bushpilot
04-06-2007, 07:26 AM
I use a STEM Stand on my Moto Guzzi (v11 naked sport),
i run a crg lane split bar end mirror so i screwed the
stem stand into the right side factory mirror mount/thread...
the valentine one works well & is good and steady.
on my bmw k1200lt (aka, the flying Kouch) i use
a saeng (www saeng dot com) mount...theyve got
several mounting options (again i mounted mine on
the right/throttle side, in the mirror mount/hole)
i always run the valentine one on the throttle side and
aim it toward the left slightly (since my experiance is that
most cops sit in the median, on interstates at least)
w/ the detector mounted on the throttle side i can hold
the throttle steady and still adjust the volume etc...and
i can quickly pull the detector down (when im riding in
virginia ;)
RacerX
04-06-2007, 11:43 AM
I'll answer in red.
I'm going to install a Radar Detector on my GSX-R750, and I would like some suggestions.
For the detector:
I was thinking about picking up an original Passport 8500. I don't think the V1's arrows will work that great with me in the way, and I would have to buy the remote audio adapter. I can pick up an 8500 on FleaBay for under $150 and it should provide excellent protection. It does have a built-in earphone jack like the x50 right? Yes.
For the mounting bracket:
I guess my choices are THESE (http://www.radarbusters.com/products/accessories/motorcycles/mounts/mounts.asp?res=1). Are there pluses and minuses to each one, or are they just different?
Pick the one for your handlebar width, then decide if you want a shorter stem, or a longer on, depending on where you will clamp to the bars, and where the detector will sit.
For the earphone:
I don't want to spend a lot of money on earphones. What are some good ones that I can use with the 8500? It only needs to be 1 earpiece.
Here's the ones i got in this thread. they are very loud, and i can use automute now even at higher speeds. They were around $19 on ebay.
http://www.radardetector.net/viewtopic.php?t=16440&start=15
Also:
1. How do I hardwire the 8500 in? I have a direct wire kit, but where is the best place to tap power?
I use a POWERsense node from the battery, but you could go right off battery, or depending on your bike, maybe tap off a parking light or something that powers when the bike i running.
2. Will a tinted windscreen affect the 8500 much?
Radar no, laser, maybe.
3. Is the Radar Cover (http://www.radarbusters.com/products/accessories/motorcycles/radar-cover.asp) worth the $25 if I'm not going to be riding in rain and the 8500 will be under the windshield?
It is for me. it keeps dust and dirt out, plus you never know if you could get caught in crappy weather. plus i painted mine, so it isn't as obvious.
http://donspc.com/Forum/x50bike.jpg
http://donspc.com/Forum/x50cover.jpg
Here's wher i plug mu headphones into. i ran a cord from the X50 to this point.
http://donspc.com/Forum/earplug.jpg
noshoes
04-06-2007, 03:53 PM
Those set ups look waaay to much like a "Fuzz-buster" to ever talk your way out of a ticket if you do get pulled over!!! Plus you have to unplug and remove the unit every time you park your bike. How water resistant are those units, not very I would guess....I love my Cruisader its has saved me countless times!!!!!!!!!!!! Check it out!!http://www.radardetector.net/viewtopic.php?t=23573
spankyaf
04-06-2007, 06:35 PM
Those set ups look waaay to much like a "Fuzz-buster" to ever talk your way out of a ticket if you do get pulled over!!! Plus you have to unplug and remove the unit every time you park your bike. How water resistant are those units, not very I would guess....I love my Cruisader its has saved me countless times!!!!!!!!!!!! Check it out!!http://www.radardetector.net/viewtopic.php?t=23573
While its a nice setup the Cruisader cant match the performance of the Big 4 and of course its Spectre detectable so its not the solution for illegal jurisdictions
Longsnowsm1
04-06-2007, 07:33 PM
I'm on the same wavelength as Noshoes. I want water resistant, don't want the hassle of mounting, and dismounting, and a clean integrated design.
I wish Valentine or Belscort made a top RD for this type of installation, but they don't. So a compromise maybe in order. My RD does me no good if I leave it in the topcase or saddlebags because it is a pain on my daily commute to do the RD gymnastics.
So while I am not thrilled with the performance compared to the top RD's, I think I am going to take the plunge on a Cruisader also. Which works better a V1 in the saddlebags or a Cruisader that is hardwired and turned on when I start the bike?
I have a host of stuff that I have bought for the bike to make life better for the commute and rarely use it due to the hassle. Tankbag, GPS, V1... So I think it is time I just get something that is hardwired and will get used. Now I just need to figure out how I would mount this unit.
Obviously if you live someplace where there are legal issues then your not going to be getting anything other than the STI as it is the only game in town when talking Spectre.
allyoops
04-06-2007, 08:52 PM
Has no-one considered the Bel 975 or even the SR7?
Both would appear to be good options for mounting the detector head underneath the fairing.
The 975 when it's sold in Europe as the Target EVO 966 RM, is specifically modified for use in this way.
Ally
noshoes
04-06-2007, 09:34 PM
"While its a nice setup the Cruisader cant match the performance of the Big 4 and of course its Spectre detectable so its not the solution for illegal jurisdictions"
I can pick up most radar miles away with no problem, its performance hasnt been a problem at all in my experience.Radar Roy gave it 4 out of 5 stars!!! The antenna for it is (in my bike) is behind a thin plastic plate at the very front of the bike and not a glass windshield like most detectors that are made with cars in mind. This placement (in my mind) matters and affects the performance of a detector. As for the dreaded "spectre" issue, unless you live or ride in the state of Virginia or Washington D.C. (U.S. only) then you dont have any worries about that! After having a Cruisader on my bike for over a year and 10,000 miles (in 18 states) I wouldnt trade it for slightly better performing obvious car type detector!!!! :mrgreen: :mrgreen: :mrgreen:
ES13Raven
04-07-2007, 04:12 PM
Has no-one considered the Bel 975 or even the SR7?
Both would appear to be good options for mounting the detector head underneath the fairing.
This guy has a sweet SR7 setup: http://www.bikepics.com/members/indyboy/05gsxr1000/
I just can't see spending over $1000 on an SR7. Hell, I bought my bike for $2500 :lol:
Those set ups look waaay to much like a "Fuzz-buster" to ever talk your way out of a ticket if you do get pulled over!!! Plus you have to unplug and remove the unit every time you park your bike. How water resistant are those units, not very I would guess....
I mentioned in another thread if anyone had tried this: using the LegalSpeeding Radar Box (http://www.legalspeeding.com/radarbox.htm) but installed upside down underneath the headlights like this: http://w1.bikepics.com/pics/2005/08/30/bikepics-419641-full.jpg
It looks like the Radar Box protects the RD from water, debris and easy theft. Plus with it mounted underneath, it will be somewhat hidden from thieves and police.
ES13Raven
04-07-2007, 04:22 PM
I'll answer in red.
Back at ya in blue.
For the detector:
I was thinking about picking up an original Passport 8500. I don't think the V1's arrows will work that great with me in the way, and I would have to buy the remote audio adapter. I can pick up an 8500 on FleaBay for under $150 and it should provide excellent protection. It does have a built-in earphone jack like the x50 right? Yes.
Cool, the original 8500 is the detector to have.
For the mounting bracket:
I guess my choices are THESE (http://www.radarbusters.com/products/accessories/motorcycles/mounts/mounts.asp?res=1). Are there pluses and minuses to each one, or are they just different?
Pick the one for your handlebar width, then decide if you want a shorter stem, or a longer on, depending on where you will clamp to the bars, and where the detector will sit.
My bike/year options are stem mount and control mount. Both look like they will block the gauges. :(
Roy also sells this Windshield Mount (http://www.radarbusters.com/products/accessories/motorcycles/mounts/product.asp?prodid=97) that looks like it might be better. There are more photos of it HERE (http://www.legalspeeding.com/AWM.htm)
For the earphone:
I don't want to spend a lot of money on earphones. What are some good ones that I can use with the 8500? It only needs to be 1 earpiece.
Here's the ones i got in this thread. they are very loud, and i can use automute now even at higher speeds. They were around $19 on ebay.
http://www.radardetector.net/viewtopic.php?t=16440&start=15
Yeah, I saw in another thread that you had those. They look pretty sweet for $20. Did you get the ones with the volume control?
allyoops
04-07-2007, 04:37 PM
If you are going for a detector like the 8500 and are worried about clearance issues above the forks, don't forget you could always mount the detector on its side at 90 degrees, vertical to the road instead of horizontal.
There is usually plenty of room right next to the inside of a fairing and it shouldn't get in the way of anything there.
Ally