View Full Version : Rapid Flaking - Plastic vs Glass
Regis
07-05-2005, 11:04 PM
In April, I applied my first coat of Veil ever, and admittedly, it was a streaky, less than perfect job. :) The third week of June I took a 2400km road trip, and although the Veil on my headlights was mostly intact (about 10% chipped) decided to re-apply for a little extra edge. The Veil on my small foglights appeared almost completely intact, maybe 5% flaked, so I did not re-apply that.
This re-application looked much better and much smoother with the tips since posted here (about shaking the can, letting it settle, using the foam brush instead of the paintbrush, etc).
Now that my roadtrip is complete, my headlights are already about 10-15% flaked again. My foglights are maybe 6-7% flaked, almost unchanged from the start of my roadtrip.
Is this amount of flaking in two weeks normal? My headlights have a plastic cover and the foglights glass; is there something I can do to make it last a little longer on the plastic? :(
Cheers!
EastGermanOlympicJudge
07-06-2005, 03:18 AM
My experience has been similar. It's the highway miles, I think. All the bugs and rocks and stuff seem to ablate the coating very quickly.
Apparently The Veil Guy has been working on some improvements. My suggestion would be to make a Veil "film," like the tint you put on your windows. It would be easier to apply evenly, would establish a baseline for "coats," and would probably stand up better to abuse.
FWIW, next time around, I'm going to disassemble my headlights and Veil the INSIDE surface. Or is that a stupid idea? Ya think it might get too hot for the Veil?
cdenton
07-07-2005, 09:48 PM
I was wondering if that would work, too.
thestaton
07-07-2005, 10:00 PM
I think its a great idea. If it works I might do it to mine :)
Heat shouldn't be a problem!!!
--staton
Veil Guy
07-07-2005, 10:37 PM
Since some you guys are having the same kinds of issues, we are going to look into making the coating even more durable and resistant to road debris.
We'll try to provide a resolution to this phenomenon - you guys shouldn't have to resort to coating the interior of your lenses, if we can help it.
Mike, since you are relatively close, we will send you a sample that should improve VEIL's durability even further.
PM me when you are in a position to receive it and try it out.
Veil Guy 8)
Regis
07-07-2005, 11:07 PM
Sounds promising Bob, I just wish I was closer than Mike. :)
You know, I have a feeling a lot of companies would just say "oh well", and expect that increased flaking would improve their sales. Thanks for working on a fix!
There was an enormous amount of bugs on my trip, which did occur to me as a factor. The car wash when I returned was a real b!tch. Perhaps "bug juice" is an effective Veil remover like Windex or rubbing alcohol? :)
I do find it curious that the plastic headlights seem to be flaking/chipping far more rapidly than the glass foglight bulbs though.
I may try Happy's suggestion of smoked headlight covers with Veil on the inside (and outside) if I can find some since taking apart my headlights to coat the inside didn't look anything like a simple task.
On a 2400km trip, I only encountered a single speedtrap the entire journey, laser, and the guy stuck beside me in the pasing lane (previously going a lot slower than I was until that exact point when we were about even speed due to my slowing down moderately in a construction zone) got pulled over instead of me. I don't think they even targetted me since my RX65 never went off at all, and had they got a reading I would've been pulled over as well (unless the RX65 missed it and the flaky Veil saved me).
Bob, do you have a read on how effective flaky Veil is? :) With about 10-15% of the headlight surface chipped away, is performance reduced by 10-15% or is it significantly better or worse than that?
Veil Guy
07-07-2005, 11:30 PM
Depending on how large the areas exposed are may have an impact. We do believe one would still have a fair amount of protection because the reflected surface would not be contiguous in this instance which is probably a good thing.
At any rate, perhaps the bug guts could very well be an accelerant to wear. We, frankly, have not formally tested that one.
It is surprising to us that you are experiencing this to perhaps a greater degree on plastic. We would have expected the opposite to be true.
Perhaps it is the particular shape, location, vehicle Cd, and/or the nature of the road debris.
Whatever the phenomenon you are experiencing we are interested in addressing the underlying cause. If Mike sees some improvement in his experiences, then we'll know that we are on to something.
And we'll see to it that we'll take care of you...The next round of product Roy receives should already incorporate an improvement which should serve to minimize this issue going forward. We will keep a close eye on this one.
Thanks for this valuable feedback.
Veil Guy 8)
happya$$
07-08-2005, 05:36 AM
Sounds great!
ZO6Vette
07-08-2005, 09:49 PM
"you guys shouldn't have to resort to coating the interior of your lenses"
Wow, thats genius if it works, does it work applying from the inside?
Veil Guy
07-08-2005, 10:42 PM
It is our firm belief that given the nature of VEIL, one would be better served by using the product as it was intended - coating the outside.
Will it work on the inside? Certainly. Will it be optimal? Doubt it.
We have had VEIL on one of our vehicles now for well over a year with no pitting or flaking issues. The vehicle is a recent model 540i with composite (plastic) outer housings.
Something is likely going on here that more than meets the eye, as it were.
Our engineers are interested in investigating and addressing this issue. I trust with this feedback mechanism and our desire to get to the bottom of these isolated concerns, we'll figure it out...
Veil Guy 8)
happya$$
07-09-2005, 07:04 AM
Guys if their is one company that will address any issues with their product it is Bob's company. He hears the voice of the customer loud and clear and IF I know Bob like I think I know him he is losing hours of sleep working on a solution with his all star team
KaPro
07-09-2005, 10:31 PM
Bob,
I have an 05 Dodge P.U. with the plastic lenses. I have applied my veil 4 times now. I also experienced the flaking phenom. I resorted to the drastic measure of 220 grit sandpaper. By adding some "texture" to the surface of the lenses, the fourth coat seems to be holding. I live in Susquehanna county Pa and maybe I'll swing by your location in the near future and show you my application. I do have to say that "texturizing" my lenses was not on the top of my want to do list but what's done is done. The bottom line is Veil Rocks!
Thx Scott
TheGame
07-13-2005, 04:55 PM
We have had VEIL on one of our vehicles now for well over a year with no pitting or flaking issues. The vehicle is a recent model 540i with composite (plastic) outer housings.
I drive a 2000 Mercedes and have had the same flaking issues and difficulty even getting a good coat to adhere ... it seems to sort of bead off like water off a waxed car even though I cleaned the composite headlight housings repeatedly with alcohol to remove any wax. Did you do anything special to the BMW lights? I'm guessing as they're both German they're probably similar or the same in composition.
Veil Guy
07-15-2005, 01:55 PM
TheGame,
A little over a year ago, a gentleman from soCal was having the same kind of issue with his vehicle - AM DB7. The composite material may have contained some kind of slip-agent like silicone. The surface tension of the material made for an extremely difficult application.
The beading-up you mentioned sounds very similar.
Our engineers have spent countless hours in developing a coating that will go on as many kinds of glass and plastic as possible.
These newer headlight systems on some of the exotics may present a new challenge for us.
We will have to evaluate what we are dealing with here and see if we can come up with an effective solution (no pun intended) without adversely affecting coatings on everything else...
Veil Guy 8)
TheGame
07-15-2005, 02:42 PM
It looks like I may have solved it - since I have the equivalent of a pro detail shop in my garage, I buffed the headlights out with 3M Perfect-It Swirl Mark Remover for Dark Cars, an ultra-fine abrasive paint polish which is "paint safe" and leaves no residue. (It had the added benefit of buffing out clouding and pitting and left a clearer headlight cover.) I figured it would remove any sort of coating that was on the lights.
Anyway after that I cleaned with alcohol to make sure all residues were gone, then applied Veil again and it went on beautifully and adhered very well with little streaking. Hopefully it will endure and that's the end of that problem.
Veil Guy
07-15-2005, 02:49 PM
TheGame,
That is really great to hear and good to know about the 3m product!
Thanks for the follow-up...I'll be able to sleep tonight! :wink:
Veil Guy 8)
TheGame
07-15-2005, 06:35 PM
I buy the 3M polish at Pep Boys and it's available at a lot of other retailers. It's also great for working fine scratches and scuffs out of interior wood trim :wink:
fallen8511
07-25-2005, 11:33 PM
Photoblocker
FYI, the photoblocker and laser shield are mutually exclusive. Thus with the photoblocker on, you are nullfying the effect of Veil.
The photoblocker is attempting to make your plate increasing reflective, as to overexpose the flash of a camera, while Veil is attempting to reduce the reflectivity that could be used to target you car with a laser.
Thus pick one protection or the other.
Regis
07-26-2005, 12:44 AM
Photoblocker
FYI, the photoblocker and laser shield are mutually exclusive. Thus with the photoblocker on, you are nullfying the effect of Veil.
The photoblocker is attempting to make your plate increasing reflective, as to overexpose the flash of a camera, while Veil is attempting to reduce the reflectivity that could be used to target you car with a laser.
Thus pick one protection or the other.
Photoblocker on the rear, Veil on the front.... :wink:
Regis
08-10-2005, 10:05 PM
As a followup to the original topic, I just returned from another road trip, this time about 1500km. Before I left, I removed the existing flaked Veil and applied a new coat. This time, over the trip, I experienced a lot less flaking.
If this info helps you pin down durability, there were two differences I am aware of from the first roadtrip I took about 6 weeks ago where I experienced a lot of flaking/chipping.
1 -- There were significantly less "bug hits" on this trip. I'd say about a factor of 10x fewer insects smacking into the car on this trip.
2 -- When I applied the Veil, I applied it at night, and had the headlights on during application for more light, and to try and see if it was going on evenly a little better. Ironically, it was streakier than my previous application, but slightly thicker. When applying the Veil, the headlight surface must have been warm from the lights, because I occasionally noticed a little "steam" arising from the Veil on the lights. Perhaps this formed a faster, harder coating?
Cheers!
Regis
09-03-2005, 04:17 PM
How did the beta formula Mike tested work out?