PDA

View Full Version : I musta screwed up



Longsnowsm
07-08-2005, 07:46 PM
Well my can of Veil showed up and I decided it was time to play. So I attempted to apply veil to the headlight of my motorcycle and my little work car(wanted to see what it was going to look like and see how hard it was to apply before putting it on the family SUV). Well I musta screwed up... I followed the instructions, shake well, wait 5 minutes, then apply thin coat. Well that sponge applicator holds more Veil than I intended to apply and it did run. Both vehicles I applied the Veil to look like I have smoked lense covers or something. Did I just put this stuff on too thick or what? I only applied one coat. I will get to test the headlights in my car tonight as I go home from work... Fingers crossed that it didn't cut down the amount of light too much to be a problem.

Take care, drive safe,
Longsnowsm

Veil Guy
07-08-2005, 08:40 PM
Longsnowsm,

Welcome to the forum.

You are definately correct about the foam applicators, they can and do hold a good amount of VEIL.

If you can post a PIC of your application, we would be more certain.

At any rate, its pretty normal to see a visible tint in certain headlight systems. Provided that your light output hasn't been adversely effected, you'll probably be fine.

Veil Guy 8)

PS: Sethy is the resident expert on proper Veil application, perhaps he has something to offer here... :D

happya$$
07-08-2005, 08:47 PM
No my headlights look like this also. I personally like the smoked look. The Veil will not cut down on your light output.

crazyVOLVOrob
07-08-2005, 09:06 PM
\\/Picture of VEIL on my passenger headlight(light on the left)\\/
http://memimage.cardomain.net/member_images/3/web/567000-567999/567917_174_full.jpg
I have yet to notice a different in the light output (with or without VEIL), and if anything the lights seem brighter 8)

Longsnowsm
07-09-2005, 11:00 AM
Well the night time test went OK. I did notice a reduction in light output, but visibility is still acceptable. My application is pretty dark. I will take some pics of this on my days off next week. My application looks like a dark tint almost. Everyone is right it is very hard to apply without streaking. I think I will practice a little more on the tail lights on my beater mobile car before touching my truck. I need to get better at this before I go messing with something more valueable/visible. I still have my wife's car to experiment on as well. So I still have a few more opportunities to get better at this.

I pulled the bike out and took it to work this morning. The Veil really cuts down on the visibility of the bike(much harder to see my headlight in the daytime with the Veil applied). Which isn't really a good thing on a motorcycle, but I will try it and see how many times I nearly get run over before I decide to keep or remove the Veil. I will test the light output tonight on my ride home from work. I think the light output will be much more critical to me on the bike as the lighting system is marginal at best to begin with. So as long as the light output is good I will test it more on the bike.

I think this product would be very nice if it was like adhesive/peel-off strips that you just applied that way, and or a spray on type of application. This product really adds to my peace of mind after seeing the video's on this site. I like the independent testing done here without financial interests getting in the way... Just good old fashioned fun.

Longsnowsm

happya$$
07-09-2005, 11:06 AM
Yeah Longsnowsm you said the key "I like the independent testing done here without financial interests getting in the way... Just good old fashioned fun". That is what the 7/16 test is going to be ALL ABOUT, pure unskewed results. We will let our numbers do the talking and recommending! Just remember who is the man that allowed this to happen and that is the one and only Radarroy. His forum has done wonders for us consumers. Also he was kind enough to lend us his Stalker LZ1. The best thing everyone can do on this forum is to buy from him. His prices and customer service is EXCELLENT! Thanks Roy for letting us in your world!

Longsnowsm
07-09-2005, 11:44 AM
You said it Happya$$. I bought my Laser Shield, Veil, and Super Protector from Roy. Depending on the results of the jammer testing and the avoidance of jammer codes on the guns I may be asking Roy about one of those Lidatek units. I live in the communist state of Colorado that just made it illegal to use jammers so I am having to think pretty hard on getting one. So Veil, Laser Sheild, a car bra are going on everything I can put it on. The local PD and state troopers just starting using LIDAR in my local area... Interesting the law gets passed and the LEO's suddenly have new toys....

Longsnowsm

sethy
07-09-2005, 01:21 PM
Hey, just noticed the windshieild wipers on your headlights, be careful that the stuff that sprays up on them does not contain alcohol or amonia, or you'll be washing your headlights off :)

SmaartAasSaabr
07-09-2005, 04:39 PM
they spray washer fluid...

Longsnowsm
07-10-2005, 11:22 AM
Well the bike night time riding turned out OK also. Again light output was cut somewhat on the bike with the Veil coat that I think I put on too heavy. So there was some reduction in visibility, but I think it is still OK. Now as long as I don't get run over I will keep running the Veil on my bike. I would think that LIDAR would have a lot of trouble picking up a bike with Veil applied since there aren't many targets of opportunity on the front for them to hit. Should be interesting to see how this works out. I just hope the dark looking tint of the Veil doesn't get me the wrong kind of attention.

I will get some pics of the Veil applied this week and post them, and practice some on application. I have an Expedition that is a LIDAR nightmare with all chrome on the front. I am not sure how effective these countermeasures are going to be on that monster, but I am gonna try! :-)

Thanks again for all the support and feedback guys. This forum is terrific.

Longsnowsm

crazyVOLVOrob
07-10-2005, 01:28 PM
Hey, just noticed the windshieild wipers on your headlights, be careful that the stuff that sprays up on them does not contain alcohol or amonia, or you'll be washing your headlights off :)They do in the summer i use a concentration of 4:1 water washer fluid. Winter i use straight washer fluid cause it's likely to freeze in upstate nyat school I do have to turn off my headlights, but they are always on... to prtect VEIL i turn to the day time running lights which is pretty much headlights with out interior lights...works great for me

Longsnowsm
07-12-2005, 03:28 PM
OK, I just installed the bra on my little beat'em up work car and took some pics... Good lord a Ford Aspire looks STUPID with a bra on it! Anyway here it is...

http://pg.photos.yahoo.com/ph/longsnowsm/detail?.dir=/23b3&.dnm=bdee.jpg&.src=ph
http://pg.photos.yahoo.com/ph/longsnowsm/detail?.dir=/23b3&.dnm=b08f.jpg&.src=ph

Veil Guy
07-12-2005, 03:37 PM
Longsnowsm,

Whatever you think the look are, I rekon that vehicle as is and treated with VEIL will be much more difficult to target, indeed.

Safe driving.

Veil Guy 8)

Longsnowsm
07-12-2005, 03:44 PM
The concern I had was did I put this stuff on too thick? Is that why the lights look tinted? Or is that the way is is suppose to look? Thanks.

I will take some pictures of my chrome nightmare and let you see what I am practicing to Veil next... It isn't going to be easy :-(

Longsnowsm

Veil Guy
07-12-2005, 04:58 PM
From the pictures, things looked OK to me.

A somewhat darker appearance is typical and should provide you with ample protection with your current setup.

Veil Guy 8)