PDA

View Full Version : veil???



pemarsh
02-05-2005, 05:02 PM
Has anyone had any poor esperiences using this?? Also, does it affect headlights at night (e.g., less light from headlights?)

happya$$
02-05-2005, 05:18 PM
I have NOTHING but GREAT things to say about this product. It works as advertised. Just make sure that it is not below 40 degrees F when you apply it and also make sure you give it at least 24 hours to cure. A blow dryer also help speed up the curing process

marlinspike
02-05-2005, 05:41 PM
Here's my question. You have a blinder, why do you need veil? And in case your answer is M20 doesnt always work, how about m40?
Richard

happya$$
02-05-2005, 05:48 PM
The M20 works everytime or i should say HAS worked everytime FOR ME. The Veil just gives me extra cushion just in case. I would rather be safe than sorry. A few days ago I was going 80mph on the Turnpike. I got lasered and everyone knows Ohio's reputation in terms of speed enforcement. The M40 would be great also. Do not forget that the Veil will never go absolete since it does the basics very well (cut down reflectivity). Get the M40 and Veil. You can apply Veil to the rear of your car (plate, breaking lights, etc.), the front of your car (plate and headlights). This of the Veil as your last stand of defense. If the M40 would fail the Veil would be there to pick up the slack.

stealthJamal
02-05-2005, 06:41 PM
The SML test on the Blinder M20 were on a white car with no Veil. White cars are the easiest for laser to get a reading and the M20 did very well. You probably don't need Veil if you have an M20 installed correctly. But for people like myself and happya$$, we have to have everything.

I still need to get a BCT12 to catch up with you happya$$. I got a Blinder M20 on the way to replace my front ZR3 jammers, gonna leave the rear ZR3 jammer on.

marlinspike
02-05-2005, 06:43 PM
Speaking of BCT12, what does having a scanner do for you?
Richard

pemarsh
02-05-2005, 06:46 PM
I have the zr3...i like it becuase i dont need the display module hooked up in the car---i just have it wired through the 8500.

I wish there was a way I could purchase the blinder m20 or 40, and be able to wire it through the 8500, as it seems its better at jamming than the zr3. I hate to have the display module in the car.

Any suggestions?

stealthJamal
02-05-2005, 07:00 PM
Don't have any suggestion on that. I've always ran my ZR3 by itself. I don't mind the extra display.

pemarsh
02-05-2005, 07:01 PM
does anyone have a picture of the display???

sethy
02-06-2005, 12:55 AM
Moved to veil forum.