PDA

View Full Version : photocopy plate with VEIL/Lasershield *vs* VEILED plexi PICS



kap1027
07-18-2005, 07:55 PM
http://community.webshots.com/album/398710492hiaqZW

being unsatisfied with the way my old set up looked like, i decided to try the photocopied plate method. i walked into kinko's, copied it for 89 cents, lamenated it for 4 bucks, and cut it to size for free. took about 15 minutes. got home, lightly veiled the lamenation, and when it dried i mounted it with my lasershield.

old set up-real plate, lasershield, veiled plexiglass

new setup-lamenated photocopy of plate with light coat of veil, lasershield


let me know what you guys think...

NooB1FieD
07-19-2005, 02:45 AM
http://community.webshots.com/album/398710492hiaqZW
i walked into kinko's, copied it for 89 cents, lamenated it for 4 bucks, and cut it to size for free.

I went in and handed them my plate, but he said he couldnt hit the copy button legally, but I could use one of their machines as long as I hit the button. So I just left. I live in washington btw.

spankyaf
07-19-2005, 11:03 AM
Very nice I've noticed that the paper only plates dont look good once they get wet. I do wonder how much the plastic will contribute to the reflectivity of the plate.

kap1027
07-19-2005, 11:15 AM
yeah he would only make me a black and white if i wanted him to do it. so i did it myself....

the plastic cant be nearly as reflective as a license plate, especially to IR sources with the light coat of Veil i have on it.

TheGame
07-19-2005, 11:24 AM
Very nice I've noticed that the paper only plates dont look good once they get wet. I do wonder how much the plastic will contribute to the reflectivity of the plate.

Can you seal it from the back somehow to prevent water from getting in?

kap1027
07-19-2005, 12:36 PM
its sealed front and back. the lamenating machine just melts two pieces of plastic together to form a seal around the paper. should be completely water tight. hasnt rained since i put it on, but as soon as it does i'll let you guys know how it holds up.

although, it has been very humid the last few days and it looks fine.

kaledrr
08-16-2005, 04:44 PM
lamenating machine , where did you find it?

thestaton
08-16-2005, 04:48 PM
looks sweet! if I had to use a front plate I would definatly do it this way!

SpeedFreak
08-16-2005, 06:25 PM
Good idea! If a cop is far from it he will never see the difference and it reflects way less than the original plate.

NooB1FieD
08-28-2005, 03:30 AM
Just make sure you cut out the paper you printed the plate on, then lammenate, then cut agian, but leave a small plastic trim. It WILL NOT leak.

Hepotter
10-18-2005, 09:53 PM
I am a scuba instructor. I make Kinko laminated cardboard skill sheets which I take underwater with me. The secret is to laminate three or four times. Just laminate over the last lamination. It works great. Careful when you trim excess so you don't get into the cardboard by accident and get a leak. :roll:

f_399
10-18-2005, 10:24 PM
http://community.webshots.com/album/398710492hiaqZW

being unsatisfied with the way my old set up looked like, i decided to try the photocopied plate method. i walked into kinko's, copied it for 89 cents, lamenated it for 4 bucks, and cut it to size for free. took about 15 minutes. got home, lightly veiled the lamenation, and when it dried i mounted it with my lasershield.

old set up-real plate, lasershield, veiled plexiglass

new setup-lamenated photocopy of plate with light coat of veil, lasershield


let me know what you guys think...

good idea!

You:
VEILED laminated photocopy of plate + laser shield

What I want to do:
laminated photocopy of plate + VEILED laser shield

will this be the same?

Veil Guy
10-19-2005, 02:49 PM
8)

Veil Guy 8)

raresvx
10-20-2005, 11:15 AM
http://community.webshots.com/album/398710492hiaqZW

being unsatisfied with the way my old set up looked like, i decided to try the photocopied plate method. i walked into kinko's, copied it for 89 cents, lamenated it for 4 bucks, and cut it to size for free. took about 15 minutes. got home, lightly veiled the lamenation, and when it dried i mounted it with my lasershield.

old set up-real plate, lasershield, veiled plexiglass

new setup-lamenated photocopy of plate with light coat of veil, lasershield


let me know what you guys think...

I have to admit im impressed! photocopied plate dam thats smart thinking!

Aaron
10-20-2005, 01:45 PM
Probably illegal but it still performs the function of a real plate and probably easy to talk your way out of if you carry the real plate. Kudos.

Lucky225
07-10-2006, 05:04 AM
Cr8apl8.com are these plates really non-reflective? I think I'd rather have one of these then a photocopy for the simple fact that you can place the exp stickers on the tags, and I don't think it would be noticeable up close if a cop was running the sticker number to make sure it's legit. Do you think these plates would have the same effect as veil? I can't really afford veil right now, and this looks like a better solution, I'd even consider putting a fake one on the front w/ a lasershield on the back license plate, or maybe a cover on both fake plates to make it even less noticeable that the plates aren't metal.

Public Enemy No 1
07-10-2006, 05:53 AM
Nice. But I wouldn't get away with it here as most traffic stops are at night and the difference between a real plate and a photocopy would be really easy to spot.

Lucky225
07-10-2006, 06:51 AM
cr8apl8s are fiber glass, not photocopy, that was the point

2600-hotbird
07-18-2006, 05:23 PM
I had a photocopied plate for 3 years and it only started to look weird the last 6 months. I would suggest some kind of rigid backing that won't wilt over time. If I'd done that, it would have lasted a lot longer. My Guard unit has a ton of cops and I asked most of them if they could tell, none of them had any clue. With an old Blinder M-06HP I could JTG most of the time (black car).I wouldn't suggest it for the rear though.

cell21633
06-17-2007, 11:20 PM
Someone friggin' stole my lasershield.


..on a side note, i decided to try another method. I work at a photolab so I scanned in my plate and printed it out on an 8x12 sheet. The only paper stock we had was glossy. Matte probably would work at an advantage. Either way, this method is slightly better because the paper stock is slightly thicker than regular printer paper, and MUCH less than CR8APL8.

JDS
06-17-2007, 11:45 PM
Problem is, that ink or toner probably isn't UV resistant. Depending on where you park and how sunny it is in your area, the plate will look increasingly fake as it fades. And I DON'T believe that it's going to be easy to talk your way out of. "Well, son, I'm sure you've got a great reason for removing your perfectly good state-issued plate, manufacturing a new one out of paper, and coating it with this grey-ish stuff. Whatever the hell this is. Right?"

I'd say you've got three viable options here:
1: Use this method, but watch closely for fading and make a new one when it starts looking bad.
2: Make a new one with UV-resistant pigment ink.
3: Get a CR8APL8.