PDA

View Full Version : Amount of Veil applied affects lidar accuracy?



RensoreK
07-20-2005, 05:50 PM
I applied some Veil after I received it and followed the instructions like a bible. Well, my headlights are projector style and reflect everything, I applied veil (a thin coat) and I can see it up close but its not as dark as other photos I've seen, should I remove it and re-apply a little more? It looks more like a "very slight tint" than a "glaze/smoke/charcoal" look to it. Did I apply it correctly? or do I need more (I applied lightly to where it would run a little but not drip or condense too thickly)

Veil Guy
07-20-2005, 11:55 PM
RensoreK,

Anyway you can post a pic of your application? Some headlight systems are such that even after a good coating, it is difficult to tell that VEIL is applied.

For example, we had removed a proper coating on a Volvo's headlight system because it was almost impossible to tell that it was on.

[Lighting] systems vary from make to the next so certain variations are to be expected. If the coating, however, is too thin, then performance will certainly be compromised.

If you are really unsure and since there is a lot of VEIL in one container, why not try another application (perhaps with the 2" or 1" foam applicator). Start at the top of the headlight system with a fairly heavy amount of material and let it flow out with gravity as you complete horizontal brush strokes as you work your way down the headlight system.

Veil Guy 8)

jackenloper
07-21-2005, 09:00 AM
Start at the top of the headlight system with a fairly heavy amount of material and let it flow out with gravity as you complete horizontal brush strokes as you work your way down the headlight system.

Sad... but this just got me kind of excited.[/quote]

sethy
07-21-2005, 10:15 AM
We have a video of the man himself applying VEIL to a honda civic.

Hopefully it will be up in the near future.

RensoreK
07-21-2005, 12:50 PM
If you are really unsure and since there is a lot of VEIL in one container, why not try another application (perhaps with the 2" or 1" foam applicator). Start at the top of the headlight system with a fairly heavy amount of material and let it flow out with gravity as you complete horizontal brush strokes as you work your way down the headlight system.
Veil Guy 8)

I thought it was bad to apply more than one coating of veil? I would have to remove the first coat right?

RensoreK
07-21-2005, 01:28 PM
Here is the pictures, sorry they aren't much detail all I have for now is a camera phone :?

http://img17.imageshack.us/img17/24/80344692997330016lo.jpg
http://img17.imageshack.us/img17/2606/80344741893330010pp.jpg
http://img17.imageshack.us/img17/6474/80344778629330013qp.jpg

nomis
07-21-2005, 01:32 PM
RensoreK,

For example, we had removed a proper coating on a Volvo's headlight system because it was almost impossible to tell that it was on.

Veil Guy 8)

this volvo wouldnt happen to be a s40 model would it? my headlight is made of glass, would application be easy?

Veil Guy
07-21-2005, 01:49 PM
I think it was an S80.

Your pics look a little streaky...

Bob.

RensoreK
07-21-2005, 06:10 PM
Should I remove it and start all over again? This was with the sponge applicator, but then again im not an artist :lol: I did use the long horizontal strokes as suggested though. Also, it hurts more than it helps to put two coats right? Or is more than one coat okay?

Veil Guy
07-21-2005, 06:12 PM
Use only one good coat, not two.

Start with a heavy amount at the top of light system and brush in horizontal strokes as the material flows out.

Veil Guy 8)

RensoreK
07-23-2005, 06:19 PM
But it actually hurts to apply a second coat after the first coat is solid and dry? I was planning on applying a bit more to some chrome because it's still fairly reflective compared to my headlights... :(

P.S. I re-did the headlights using the 2" foam brush, and it came out *spectacular*. Much better than the smaller foam brush or the regular brush

Veil Guy
07-23-2005, 10:27 PM
RensoreK,

Thrilled to hear that! I am pleased that our company decided to include the 2" foam applicator in the packaging.

I wouldn't think that a second coat would hurt your stealth ability. It may compromise adhesion long-term, but were are not certain.

At any rate, the lights may appear "streaky" unless you have a very good hand at painting.

I would think one good coat would do the trick.

Keep us posted on what you decide to do and good luck with it.

Veil Guy 8)

RensoreK
07-31-2005, 10:52 AM
I've begun thinking, and just out of curiousity... I know two coats might affect adhesion but it would make the lights darker, reducing the chances the gun might see it's reflection and obtain a reading (Although I'm aware it would probably also affect your light output if it got too dark). Is anyone able to verify this?