View Full Version : Question about LI Install
Eleggua
10-08-2007, 12:01 AM
Hi,
Check out this pic:
http://i233.photobucket.com/albums/ee63/Eleggua21/IMG_0430.jpg
Is the part of the head that "sees" the lidar the little bubble on the left of the head (to the right on this picture)?
Should I turn the head over so the bubble is more in the center of the bike away from the edge so it can see better?
It's also a bit back in the air intake. Do you think this will work?
Should I install another head in the other side? Or is this one enough?
Anyone know how much power this uses? I'm trying to judge how much it's drawing so I can calculate power availability on the bike.
Thanks.
dorcse
10-08-2007, 07:09 AM
Is the part of the head that "sees" the lidar the little bubble on the left of the head (to the right on this picture)?
Yes
Should I turn the head over so the bubble is more in the center of the bike away from the edge so it can see better?
I would because that should give you equal receiver coverage from extreme left and right angle shots.
It's also a bit back in the air intake. Do you think this will work?
You could move it forward a tad. The advice I have received suggests the best position is one that offers an unobstructed view of the road, mounted level and parallel with the road.
Should I install another head in the other side? Or is this one enough?
Other forum members more experienced than me please comment. I would imagine that one head is enough up front (and the other head on the back of the bike for rear shots?)
Anyone know how much power this uses? I'm trying to judge how much it's drawing so I can calculate power availability on the bike.
Sure: From the LI Manual:
Power: 12-15 V
CPU Box current: 70mA (max 700mA)
Outer sensors: 30mA
Operational temperature: -30 to +70 C
Thanks
You are welcome..
Best,
Ed
rsatmans
10-08-2007, 08:39 AM
Is the part of the head that "sees" the lidar the little bubble on the left of the head (to the right on this picture)?
Yes
Should I turn the head over so the bubble is more in the center of the bike away from the edge so it can see better?
I would because that should give you equal receiver coverage from extreme left and right angle shots.
I would also turn it over
It's also a bit back in the air intake. Do you think this will work?
You could move it forward a tad. The advice I have received suggests the best position is one that offers an unobstructed view of the road, mounted level and parallel with the road.
X2 you need to move it forward a tad so that the LI has a better chance to see and jam the gun.
Should I install another head in the other side? Or is this one enough?
Other forum members more experienced than me please comment. I would imagine that one head is enough up front (and the other head on the back of the bike for rear shots?)
I would also think that one head would be enough if you flipped it over and moved it forward. I would pm racerx as he has done allot of testing on his motorcycle.
Anyone know how much power this uses? I'm trying to judge how much it's drawing so I can calculate power availability on the bike.
Sure: From the LI Manual:
Power: 12-15 V
CPU Box current: 70mA (max 700mA)
Outer sensors: 30mA
Operational temperature: -30 to +70 C
Thanks
You are welcome..
Best,
Ed
glider
10-09-2007, 01:12 AM
A question for LI guys:
How wide is the LI laser beam in degrees?
In other words: what's the maximum admitted error in levelling the two heads when instaling it?
If the car is heavy loaded (example: 2/3 guys in the back seats) may the heads shoot too high?
thank you... :)
Rob
interceptor
10-09-2007, 02:15 AM
check out a details for SPLP90_3 osram laser.
noorudeenshakur
10-09-2007, 03:14 AM
check out a details for SPLP90_3 osram laser.
|\/|Y 6()()6L3 F|_| 5|{1LLZ 4R3 L337
(My Google Fu Skillz are Leet!)
here's the low down on it:
http://www.farnell.com/datasheets/94055.pdf
Seems the beam divergence is 11°by 25°
Thats a nice spread....Isnt that the same as the LPP?
rsatmans
10-09-2007, 09:28 AM
I'm glad they are Osram, good to know that the components are top notch. How does the angle and power 25w compare to the LPP and AL.
g-zona
10-09-2007, 12:06 PM
I'm glad they are Osram, good to know that the components are top notch. How does the angle and power 25w compare to the LPP and AL.
It's not 25W diode!
SPL PL90_3 is Nanostack Pulsed Laser Diode in Plastic Package 75 W Optical Peak Power! (Peak output power is 90W)
The same diode is used in LPP and AL.