View Full Version : LI installed today on Volvo S60R
carlosR
10-08-2007, 11:14 PM
A friend and I installed the LI today. The hard part was figuring how to run through the engine compartment into the cabin. We went in through the door area with the head wires. It's a clean setup and we put the switch in the console next to the shifter like the guy with the BMW did. It looks great. I didn't use the audio wires and the speaker on the CPU is plenty loud enough even with music playing etc. I might have to tweak my laser heads abit to maximize coverage but will leave them as they are for now. Glad to have this setup. The guys at the audio shop wanted $300 to install. It's not rocket science.
crazyVOLVOrob
10-08-2007, 11:33 PM
Thats BS!!!!!! The most tjat i ever played for a laser jammer install was $100
dorcse
10-09-2007, 05:53 AM
A friend and I installed the LI today. The hard part was figuring how to run through the engine compartment into the cabin. We went in through the door area with the head wires. It's a clean setup and we put the switch in the console next to the shifter like the guy with the BMW did. It looks great. I didn't use the audio wires and the speaker on the CPU is plenty loud enough even with music playing etc. I might have to tweak my laser heads abit to maximize coverage but will leave them as they are for now. Glad to have this setup. The guys at the audio shop wanted $300 to install. It's not rocket science.
Great.. Congrats!
If you have a chance to post some pics, I'd love to see them.
Best,
Ed
Rottman
10-09-2007, 08:29 AM
Thats BS!!!!!! The most tjat i ever played for a laser jammer install was $100 He lives in Montana Rob what do you expect? :lol:
thestaton
10-09-2007, 09:04 AM
So you guys did not get them ran through the firewall? If not please post some pics I am bit troubled by any door installs.
Basically we need pics to see if this guy ripped you off or not. So far its not sounding to good.
rsatmans
10-09-2007, 09:19 AM
you should run the wires into the cabin through the stock fuse box in the engine compartment.
dorcse
10-09-2007, 03:45 PM
you should run the wires into the cabin through the stock fuse box in the engine compartment.
That worked for me.
thestaton
10-09-2007, 03:48 PM
you should run the wires into the cabin through the stock fuse box in the engine compartment.
That worked for me.
I have never heard of this can you explain a little more?
dorcse
10-09-2007, 04:24 PM
you should run the wires into the cabin through the stock fuse box in the engine compartment.
That worked for me.
I have never heard of this can you explain a little more?
On my BMW the fuse box is located on the left side of the engine compartment right up against the firewall.
Just under the box is a main wiring port where all of the wires from the fuse box pass through the firewall. The wiring port has an insulated boot around the wires at the firewall. (I assume that this helps keep noise, etc. from entering the cabin through this 2-3 inch diameter "port" hole in the firewall). Anyway, we just used a snake to open up the boot and pushed the modular plug ends of the LI heads through the wiring port and into the cabin.
PMoth
10-09-2007, 06:53 PM
you should run the wires into the cabin through the stock fuse box in the engine compartment.
That worked for me.
I have never heard of this can you explain a little more?
On my BMW the fuse box is located on the left side of the engine compartment right up against the firewall.
Just under the box is a main wiring port where all of the wires from the fuse box pass through the firewall. The wiring port has an insulated boot around the wires at the firewall. (I assume that this helps keep noise, etc. from entering the cabin through this 2-3 inch diameter "port" hole in the firewall). Anyway, we just used a snake to open up the boot and pushed the modular plug ends of the LI heads through the wiring port and into the cabin.
Also the case for some newer VW's and Audis.
dorcse
10-09-2007, 07:01 PM
Also the case for some newer VW's and Audis.
Don't you just love German engineering? :D (My 1991 Bimmer has a driver's side airbag and 4 wheel disc anti-lock brakes.. not bad for 1991..)
thestaton
10-09-2007, 07:33 PM
ah ok cool. that's how I did it for my T/A only you have to remove the stupid ECU and it's a major pain in the ass.
rsatmans
10-09-2007, 08:06 PM
Yeah i also had to remove my ecu but it only takes about 5 min tops since I had to take it out before to get it flashed for a performance program :twisted:
BossMan4Life
10-10-2007, 03:27 AM
The guys at the audio shop wanted $300 to install.
$300 for an install....those boys were trying to sodomize you with no vasiline. How about posting some pics so we can rate your neatness factor?
dorcse
10-10-2007, 04:26 AM
ah ok cool. that's how I did it for my T/A only you have to remove the stupid ECU and it's a major pain in the ass.
Sounds like I had it easy! :)
interceptor
10-10-2007, 05:54 AM
i have performed a lot of instalatios, and in about 90% of them i have pull the wires thru original firewall holes... where ecu is or where original instalation goes inside.. on others (realy old cars with no ecu :-) i just make a hole in firewall and seal it with silicone...
dorcse
10-10-2007, 06:26 AM
i have performed a lot of instalatios, and in about 90% of them i have pull the wires thru original firewall holes... where ecu is or where original instalation goes inside.. on others (realy old cars with no ecu :-) i just make a hole in firewall and seal it with silicone...
While we are on this subject, I did find that the LI install went very smoothly.
From strat to finish it took us about 1.5 hours. And some of that time was spent by me just deciding the best place to install the power/kill switch http://s218.photobucket.com/albums/cc87/dorcse/?action=view¤t=Pennyinstall3.jpg I think you definitely want that lighted switch to be close at hand so you can kill the device without having to fumble around for the switch.
I found the ideal place to mount the CPU was right under the left side dash http://s218.photobucket.com/albums/cc87/dorcse/?action=view¤t=Pennyinstall7.jpg
Based on my experience, LI is very easy to install.
Best,
Ed
interceptor
10-10-2007, 06:33 AM
i have the cpu located at exactly same place.. :-)
g-zona
10-10-2007, 06:41 AM
i have the cpu located at exactly same place.. :-)
You actually have installed one in YOUR CAR!? :mrgreen: :mrgreen: :mrgreen:
interceptor
10-10-2007, 09:16 AM
yes.... 8)
LOL..
i know this will sound bad but i am driving with one also.. :-) and it was not a case until one week ago...
i am changing cars realy often, so i get my self a new nice ride that i will keep for minimum 1 year so i decided to install it... :-)
carlosR
10-10-2007, 12:28 PM
Hey sorry to be gone but I did appreciate reading all the posts. I will check the firewall around the engine compartment fusebox. We did not see anything that looked too obvious. It's awful crowed in that engine bay. So how do we upload photos on this site?
interceptor
10-10-2007, 12:40 PM
using external server...
just try to find out where original ecu instalation is routed..
noorudeenshakur
10-10-2007, 04:07 PM
Hey sorry to be gone but I did appreciate reading all the posts. I will check the firewall around the engine compartment fusebox. We did not see anything that looked too obvious. It's awful crowed in that engine bay. So how do we upload photos on this site?
Use photobucket, and then copy the link to the image at the bottom that starts with http:.......
post that link in here and voila! The image showes up :) :)
for example the link he provided up top:
http://s218.photobucket.com/albums/cc87/dorcse/?action=view¤t=Pennyinstall3.jpg
when you add the following forum code to it before the http:// [IMG] and then add at the end of the link you will get the image directly viewable in here rather than having to go to photobucket to view it see:
http://i218.photobucket.com/albums/cc87/dorcse/Pennyinstall3.jpg
this is what it will look like......just make sure there are no spaces in the link like i left above at the beginning and end and the image will appear:
http://i218.photobucket.com/albums/cc87/dorcse/Pennyinstall3.jpg
dorcse
10-10-2007, 05:25 PM
Hey sorry to be gone but I did appreciate reading all the posts. I will check the firewall around the engine compartment fusebox. We did not see anything that looked too obvious. It's awful crowed in that engine bay. So how do we upload photos on this site?
Use photobucket, and then copy the link to the image at the bottom that starts with http:.......
post that link in here and voila! The image showes up :) :)
for example the link he provided up top:
http://s218.photobucket.com/albums/cc87/dorcse/?action=view¤t=Pennyinstall3.jpg
when you add the following forum code to it before the http:// [IMG] and then add at the end of the link you will get the image directly viewable in here rather than having to go to photobucket to view it see:
http://i218.photobucket.com/albums/cc87/dorcse/Pennyinstall3.jpg
this is what it will look like......just make sure there are no spaces in the link like i left above at the beginning and end and the image will appear:
http://i218.photobucket.com/albums/cc87/dorcse/Pennyinstall3.jpg
Wow.. the interior of my car is famous now!! 8) "Penny" is blushing.. :wink: