View Full Version : LI software!
lacning74
03-10-2008, 06:28 PM
http://85.125.80.136/LaserInterceptor/smf/index.php?topic=153.0;topicseen
Unfortunately, I don't have a pc to try it out. :(
lacning74
03-10-2008, 07:06 PM
I just ran it on an emulator on my imac. It is pretty slick! SIA and parking aid adjustments to name a few. It will have firmware web updates and a voice uploader.
I notice you can also assign the 4 sensor slots not only if they are on/off but if they are front/rear. It would be cool, if the LI will let you know if you got hit in the front or the rear.
repeter
03-11-2008, 09:11 AM
Figures.. Their forums are down when they release the software :cry:
PMoth
03-11-2008, 09:32 AM
Figures.. Their forums are down when they release the software :cry:
It was working fine yesterday afternoon when he released it. I failed to download the software though so I'll wait.
g-zona
03-11-2008, 10:01 AM
New link:
http://speed.g-zona.hr/sw/li_com.exe
PMoth
03-11-2008, 10:03 AM
Thanks.
Jammer84_03
03-11-2008, 11:03 AM
New link:
http://speed.g-zona.hr/sw/li_com.exe
u da man!
repeter
03-11-2008, 11:51 AM
Thanks!
christosxo
03-11-2008, 01:26 PM
You can download it from here, too:
http://www.laser-interceptor.net/site/index.php?option=com_content&task=view&id=19&Itemid=38
charles charlie charles
03-11-2008, 04:58 PM
Found here too..
http://www.laserinterceptorforum.com
Found here too..
http://www.laserinterceptorforum.com
They didn't spell "official" correct. :lol:
charles charlie charles
03-11-2008, 05:31 PM
Seems okay to me, but I cant spell shyt! :D
Loiosh
03-11-2008, 07:24 PM
Seems okay to me, but I cant spell shyt! :D
LoL. Website was up for awhile.. now it's down again. Different problem from before. Now I get a route down (ISP error)
10 164 ms 165 ms 164 ms 62.99.170.193
11 165 ms * 167 ms 62.99.171.14
12 * * * Request timed out.
13 * * * Request timed out.
Seems okay to me, but I cant spell shyt! :D
LoL. Website was up for awhile.. now it's down again. Different problem from before. Now I get a route down (ISP error)
10 164 ms 165 ms 164 ms 62.99.170.193
11 165 ms * 167 ms 62.99.171.14
12 * * * Request timed out.
13 * * * Request timed out.
It's not the route or ISP, since you started speaking of routes you probably/should know that IP packets take different routes to get to destination, so if one route goes down there will be another route to get there. So in this case I don't believe it was a "route problem".
g-zona
03-12-2008, 03:03 AM
Forum is up and running...
Loiosh
03-12-2008, 07:25 AM
Seems okay to me, but I cant spell shyt! :D
LoL. Website was up for awhile.. now it's down again. Different problem from before. Now I get a route down (ISP error)
10 164 ms 165 ms 164 ms 62.99.170.193
11 165 ms * 167 ms 62.99.171.14
12 * * * Request timed out.
13 * * * Request timed out.
It's not the route or ISP, since you started speaking of routes you probably/should know that IP packets take different routes to get to destination, so if one route goes down there will be another route to get there. So in this case I don't believe it was a "route problem".
Depends on the redundancy of the links. The internet isn't quite as resilient as most people assume. Just as an example think of the under sea cuts two months ago that dropped many nations offline or that Cogent vs Level3 thing: http://www.infoworld.com/article/05/10/06/HNispspat_1.html
You'd be surprised to learn how easily the internet could be fractured.
In case your curious, that disconnect was between erlachg and sk11 links at inode. Just down for a half hour or so.
lacning74
03-12-2008, 10:20 AM
Anyone try out the software yet? I just ordered a usb/serial cable. I hope it will work on my imac via a pc emulator.
I hope to decrease the SIA sensitivity and set it for just one head since I'm still waiting for my second replacement head. It will be nice just to hear "Welcome".
Loiosh
03-12-2008, 10:22 AM
Anyone try out the software yet? I just ordered a usb/serial cable. I hope it will work on my imac via a pc emulator.
I hope to decrease the SIA sensitivity and set it for just one head since I'm still waiting for my second replacement head. It will be nice just to hear "Welcome".
What does SIA sensitivity stand for?
PMoth
03-12-2008, 10:23 AM
Anyone try out the software yet? I just ordered a usb/serial cable. I hope it will work on my imac via a pc emulator.
I hope to decrease the SIA sensitivity and set it for just one head since I'm still waiting for my second replacement head. It will be nice just to hear "Welcome".
What does SIA sensitivity stand for?
Probably sun interference.
lacning74
03-12-2008, 01:34 PM
Anyone try out the software yet? I just ordered a usb/serial cable. I hope it will work on my imac via a pc emulator.
I hope to decrease the SIA sensitivity and set it for just one head since I'm still waiting for my second replacement head. It will be nice just to hear "Welcome".
What does SIA sensitivity stand for?
Probably sun interference.
Sorry. Yeah, it stands for Sun Interference Alert. Changing the sensitivity does not effect performance. It's the sun that causes problems, though, from reports here even when alerting, the LI seems to still jam well.
MetalFlame
03-12-2008, 02:51 PM
I really like the "look" of the new un-official Laser Interceptor Forum.
Much better than the "old" LI forum in orange colour...lol :lol:
Click on the link below.
New un-official Laser Interceptor Forum (http://www.laserinterceptorforum.com/phpbb/)
Homer_Simpson
03-12-2008, 05:39 PM
Wow, it reminds me of the LPP forum :lol:
thrash
03-12-2008, 07:35 PM
Wasn't aware that there was an "Unofficial LI Forum." When did this come about? Who developed the site? I am a member of the "orange" official one. Does Ivan run them both??
Loiosh
03-12-2008, 08:10 PM
Wasn't aware that there was an "Unofficial LI Forum." When did this come about? Who developed the site? I am a member of the "orange" official one. Does Ivan run them both??
Ivan does not run the 'unofficial' forum. It was done by some fan of LI. No idea who.
lacning74
03-12-2008, 08:13 PM
Wasn't aware that there was an "Unofficial LI Forum." When did this come about? Who developed the site? I am a member of the "orange" official one. Does Ivan run them both??
Ivan does not run the 'unofficial' forum. It was done by some fan of LI. No idea who.
I don't see the point of another forum in addition to Ivan's.
Loiosh
03-12-2008, 08:40 PM
My feeling as well.
Rottman
03-13-2008, 08:07 AM
Wasn't aware that there was an "Unofficial LI Forum." When did this come about? Who developed the site? I am a member of the "orange" official one. Does Ivan run them both??
Ivan does not run the 'unofficial' forum. It was done by some fan of LI. No idea who.
I don't see the point of another forum in addition to Ivan's. X3
V1maroc
03-14-2008, 08:11 AM
important!!! : dear all - does the new software version enables XR jamming or only allows to play with settings?
Loiosh
03-14-2008, 08:18 AM
important!!! : dear all - does the new software version enables XR jamming or only allows to play with settings?
XR Jamming requires software 7.01 (which you can upgrade to when the software is finished) and head 8.2.
http://85.125.80.136/LaserInterceptor/smf/index.php?topic=71.msg480#msg480
christosxo
03-14-2008, 09:04 AM
XR Jamming requires software 7.01 (which you can upgrade to when the software is finished) and head 8.2.
http://85.125.80.136/LaserInterceptor/smf/index.php?topic=71.msg480#msg480
With CPU BOX software v7.0 and after and even with older heads you can jam the XR.
http://85.125.80.136/LaserInterceptor/smf/index.php?topic=71.30
muledoe1
03-18-2008, 11:09 AM
my cpu ver says 6.14 so if i update that it will be at the new 7.0 one right? and my heads are 8.0. mine will still jam the XR right?
V1maroc
03-18-2008, 06:16 PM
i took a minute to check out the software... nice enuff to tweak the LI but when will we be able to transfer new software version into the cpu box? Ivan?
I dont really want to send my unit for software upgrade after all the trouble i went to receive it by mail. Even my sealant defective heads i want to keep.
Loiosh
03-18-2008, 08:17 PM
He's on vacation until next week. It may be a bit before we get an answer.
muledoe1
03-18-2008, 09:36 PM
i took a minute to check out the software... nice enuff to tweak the LI but when will we be able to transfer new software version into the cpu box? Ivan?
I dont really want to send my unit for software upgrade after all the trouble i went to receive it by mail. Even my sealant defective heads i want to keep.
so that software is only for tweaks its not an software ver. upgrade?
muledoe1
03-18-2008, 11:08 PM
what is the covering distance of a single head LI in the circle formation? Reason i ask is cause i want to know what is the best distance to space my 2 heads on the front out. Im going to do something math and length of ym bumper and the circle ration covering of a single head for best placement.
thanks
charles charlie charles
03-19-2008, 04:59 PM
what is the covering distance of a single head LI in the circle formation? Reason i ask is cause i want to know what is the best distance to space my 2 heads on the front out. Im going to do something math and length of ym bumper and the circle ration covering of a single head for best placement.
thanks
http://img.photobucket.com/albums/v251/drhealy/postinstallLIfront.jpg
Green, previous 3 LPP heads needed to get JTG PLII
Yellow, dual LI gets JTG PLII
Honestly, following my experience with both LPP and LI, I do feel that the LI can cover more frontage as long as the heads are carefully positioned to have an unobstructed view of the road ahead
PMoth
03-19-2008, 05:05 PM
Honestly, following my experience with both LPP and LI, I do feel that the LI can cover more frontage as long as the heads are carefully positioned to have an unobstructed view of the road ahead
And I fully agree with that statement.
muledoe1
03-19-2008, 09:05 PM
thanks.
so there is no specific range then
V1maroc
03-20-2008, 05:32 AM
muledoe1: the same software is both for upgrade and tweaks (sun interference , voices and parking aid tweaks just to name a few). however the upgrade section is there, just not activated, which really pissed me off after all the efforts it took me to get an USB RS232 cable and make it work with correct driver. Hopefully it will come very soon.
Loiosh
03-20-2008, 06:41 AM
muledoe1: the same software is both for upgrade and tweaks (sun interference , voices and parking aid tweaks just to name a few). however the upgrade section is there, just not activated, which really pissed me off after all the efforts it took me to get an USB RS232 cable and make it work with correct driver. Hopefully it will come very soon.
Basically Ivan has to write it all up. I think he mentioned that he's waiting until his version stabilizes before he releases the first software update.
repeter
03-20-2008, 09:53 PM
I'm using the software on a Mac with VMware and a usb to serial adapter. The sunlight interference option doesn't work properly ex: off sets it to super sensitive, but the parking sensor options work fine. Anyone else experiencing the same?
ahmadr
03-20-2008, 11:58 PM
what is the covering distance of a single head LI in the circle formation? Reason i ask is cause i want to know what is the best distance to space my 2 heads on the front out. Im going to do something math and length of ym bumper and the circle ration covering of a single head for best placement.
thanks
http://img.photobucket.com/albums/v251/drhealy/postinstallLIfront.jpg
Green, previous 3 LPP heads needed to get JTG PLII
Yellow, dual LI gets JTG PLII
Honestly, following my experience with both LPP and LI, I do feel that the LI can cover more frontage as long as the heads are carefully positioned to have an unobstructed view of the road ahead
Could you please let us know the year and model of your car, and the distance between the LI and LPP heads in the picture if possible
Thanks A LOT :)
g-zona
03-21-2008, 06:07 AM
Guys, just a note! Don't change SiA settings via this sw!
I had a problem when turn off SiA then LI becomes MORE sensitive to light and you get extremly sensitive LI which screems even at the headlights!
repeter
03-21-2008, 09:35 AM
Guys, just a note! Don't change SiA settings via this sw!
I had a problem when turn off SiA then LI becomes MORE sensitive to light and you get extremly sensitive LI which screems even at the headlights!
Check my previous post. I think the values might be reversed.. When I turned it off it was super sensitive. Now that they are on low they are less sensitive but still more sensitive than default. I'm going to try the high sensitivity setting today.
charles charlie charles
03-21-2008, 12:40 PM
Could you please let us know the year and model of your car, and the distance between the LI and LPP heads in the picture if possible
Thanks A LOT :)
Sure,
2006 W164 Mercedes M class.
LPP (dual heads by headlights)
- distance from head to outside edge of car = 50cm
- distance between LPP heads = 80cm
LI
- distance from head to outside edge of car = 66cm
- distance between LI heads = 50cm
- height above Licence PLate = 25cm
Previous dual LPP heads were set at same position as my current LI heads (yellow). This position with dual LPP gave random PT at over 1000ft (? headlights badly covered) and consistent PT around 130-140ft (number plate)
My decision was to add a 3rd head above my number plate running off another cbox to give JTG.
My decision to replace this setup with a quad LI was down to 2 factors. 2 of my LPP heads bit the dust and I got pwned from behind doing 98 on a motorway. I had no choice but to go down the LI road as LPP could not fir on my rear.
Hope that helps....
ahmadr
03-21-2008, 03:38 PM
Could you please let us know the year and model of your car, and the distance between the LI and LPP heads in the picture if possible
Thanks A LOT :)
Sure,
2006 W164 Mercedes M class.
LPP (dual heads by headlights)
- distance from head to outside edge of car = 50cm
- distance between LPP heads = 80cm
LI
- distance from head to outside edge of car = 66cm
- distance between LI heads = 50cm
- height above Licence PLate = 25cm
Previous dual LPP heads were set at same position as my current LI heads (yellow). This position with dual LPP gave random PT at over 1000ft (? headlights badly covered) and consistent PT around 130-140ft (number plate)
My decision was to add a 3rd head above my number plate running off another cbox to give JTG.
My decision to replace this setup with a quad LI was down to 2 factors. 2 of my LPP heads bit the dust and I got pwned from behind doing 98 on a motorway. I had no choice but to go down the LI road as LPP could not fir on my rear.
Hope that helps....
Awesome. Thanks a lot. I suppose the distances were from the edges of the heads, and bubbles were on outside. right?
charles charlie charles
03-21-2008, 03:48 PM
Distances roughly centre.
Yes bubbles outermost.
muledoe1
03-21-2008, 07:00 PM
can someone send me the sw. cause i tried so many times to download it and it just stops at starting.
christosxo
03-21-2008, 07:50 PM
can someone send me the sw. cause i tried so many times to download it and it just stops at starting.
Download it from here, the link it's working:
http://www.laser-interceptor.net/site/index.php?option=com_content&task=view&id=19&Itemid=38
muledoe1
03-21-2008, 08:39 PM
can someone send me the sw. cause i tried so many times to download it and it just stops at starting.
Download it from here, the link it's working:
http://www.laser-interceptor.net/site/index.php?option=com_content&task=view&id=19&Itemid=38
yeah, i tried that too and it just says "starting". its not downloading. :(
christosxo
03-21-2008, 08:44 PM
I checked it before some minutes and it's working ok.
Maybe there is a problem with your internet explorer or something...
Try other internet program or send me a pm your email and I will send it you
g-zona
03-22-2008, 02:46 AM
http://speed.g-zona.hr/sw/li_com.exe
muledoe1
03-23-2008, 03:28 PM
muledoe1: the same software is both for upgrade and tweaks (sun interference , voices and parking aid tweaks just to name a few). however the upgrade section is there, just not activated, which really pissed me off after all the efforts it took me to get an USB RS232 cable and make it work with correct driver. Hopefully it will come very soon.
where did u buy your cable from? Link me.
ragamix
03-23-2008, 03:35 PM
muledoe1: the same software is both for upgrade and tweaks (sun interference , voices and parking aid tweaks just to name a few). however the upgrade section is there, just not activated, which really pissed me off after all the efforts it took me to get an USB RS232 cable and make it work with correct driver. Hopefully it will come very soon.
where did u buy your cable from? Link me.
i got mine from amazon.. usb <-> serial
muledoe1
03-23-2008, 04:25 PM
muledoe1: the same software is both for upgrade and tweaks (sun interference , voices and parking aid tweaks just to name a few). however the upgrade section is there, just not activated, which really pissed me off after all the efforts it took me to get an USB RS232 cable and make it work with correct driver. Hopefully it will come very soon.
where did u buy your cable from? Link me.
i got mine from amazon.. usb <-> serial
aight cool .Certain one did you get that works awesome that you like?
ragamix
03-24-2008, 05:02 AM
muledoe1: the same software is both for upgrade and tweaks (sun interference , voices and parking aid tweaks just to name a few). however the upgrade section is there, just not activated, which really pissed me off after all the efforts it took me to get an USB RS232 cable and make it work with correct driver. Hopefully it will come very soon.
where did u buy your cable from? Link me.
i got mine from amazon.. usb <-> serial
aight cool .Certain one did you get that works awesome that you like?
uhh sorry i don;t really know which one i got (box has been in trash for a long time now..) i got it couple of months ago.
repeter
03-24-2008, 08:06 AM
http://microcenter.com/single_product_results.phtml?product_id=0202913
I'm currently using that one. Works great.
Loiosh
03-24-2008, 08:24 AM
If you're going to purchase any kind of cable, I suggest going with these guys: http://www.monoprice.com/products/product.asp?c_id=103&cp_id=10311&cs_id=1031104&p_id=2067&seq=1&format=2
Monoprice is the premier shop for cables and their prices are killer.
christosxo
03-24-2008, 08:29 AM
with a search on ebay you can find it at a very low price also
dimanche_HUN
03-24-2008, 09:19 AM
With which program can I edit and/or convert my voice to PCM?
If I switch the SIA time to the maximum, will the unit working correctly?
Could somebody send me a Mr. Hankey - "mkay" voice for me..? ;)
With which program can I edit and/or convert my voice to PCM?
If I switch the SIA time to the maximum, will the unit working correctly?
Could somebody send me a Mr. Hankey - "mkay" voice for me..? ;)
LI doesn't stop jamming when sun iterference occurs - the meaning of SIA allert is to let the user know that sun may interfere with LI performance and to drive carefully...
maybe we should make voice skins repository on LI site so everyone could download voice skins (and write for each skin who made it...) - here is an idea from Ivan: Beavis and Butthead voices :D and of course to make localised skins (different languages...)
dimanche_HUN
03-24-2008, 11:08 AM
With which program can I edit and/or convert my voice to PCM?
If I switch the SIA time to the maximum, will the unit working correctly?
Could somebody send me a Mr. Hankey - "mkay" voice for me..? ;)
LI doesn't stop jamming when sun iterference occurs - the meaning of SIA allert is to let the user know that sun may interfere with LI performance and to drive carefully...
ok, understood, but Javor said about the SIA turning off and the very high sensitivity.. If I set the sense to low and the time to highest, the unit will working well?
With which program can I edit and/or convert my voice to PCM?
If I switch the SIA time to the maximum, will the unit working correctly?
Could somebody send me a Mr. Hankey - "mkay" voice for me..? ;)
LI doesn't stop jamming when sun iterference occurs - the meaning of SIA allert is to let the user know that sun may interfere with LI performance and to drive carefully...
ok, understood, but Javor said about the SIA turning off and the very high sensitivity.. If I set the sense to low and the time to highest, the unit will working well?
problem with sun is that is could affect sensitivity of LI (and any other jammer) by adding too much noise in recieving end... SIA warning sensitivity only changes when will LI warn you that sun could "blind" it... LI is still jamming anyway...
repeter
03-24-2008, 02:28 PM
With which program can I edit and/or convert my voice to PCM?
If I switch the SIA time to the maximum, will the unit working correctly?
Could somebody send me a Mr. Hankey - "mkay" voice for me..? ;)
Since the SIA options don't work correctly, I've set the time to the maximum and it still works.
With which program can I edit and/or convert my voice to PCM?
If I switch the SIA time to the maximum, will the unit working correctly?
Could somebody send me a Mr. Hankey - "mkay" voice for me..? ;)
Since the SIA options don't work correctly, I've set the time to the maximum and it still works.
take note that sw is not completed, and next versions will fix that and other issues...
repeter
03-24-2008, 04:46 PM
With which program can I edit and/or convert my voice to PCM?
If I switch the SIA time to the maximum, will the unit working correctly?
Could somebody send me a Mr. Hankey - "mkay" voice for me..? ;)
Since the SIA options don't work correctly, I've set the time to the maximum and it still works.
take note that sw is not completed, and next versions will fix that and other issues...
I know. I think the fact that there is actually software available is awesome.
interceptor
03-24-2008, 05:38 PM
it is just oposite and it is working.. :-) in curent software..
so set it to max for min... :-)
it will be fixed in next alpha...
repeter
03-24-2008, 10:45 PM
it is just oposite and it is working.. :-) in curent software..
so set it to max for min... :-)
it will be fixed in next alpha...
Thanks for the update!!
pilot
03-24-2008, 11:07 PM
So if I want to turn the SIA feature OFF, do I select the SIA OFF button and set the SIA recycle to 255? Thanks for your help, I just want it off completely if possible.
interceptor
03-25-2008, 02:13 AM
i will have new alpha this eavning, so it will be on it..
Just set it to 255...
charles charlie charles
03-25-2008, 03:44 AM
i will have new alpha this eavning, so it will be on it..
Just set it to 255...
Any news on when we'll be able to update the firmware using the software?
p.s. nice holiday?
ahmadr
03-25-2008, 08:59 AM
Ivan,
Can you please consider adding a simple shutoff timer to the next beta of software? (e.g.. the LPP has a selectable 4/8/infinity timer)
Loiosh
03-25-2008, 09:46 AM
Shut-off timer for the laser jamming, ahmadr? If that's the case the LI already has that ability.
ahmadr
03-25-2008, 10:13 AM
Shut-off timer for the laser jamming, ahmadr? If that's the case the LI already has that ability.
That's what I meant. I didn't notice it in the software I guess. :)
Loiosh
03-25-2008, 10:15 AM
Yeah. The option will be exposed once Ivan finishes the firmware and the LI software. Hehe :)
ahmadr
03-25-2008, 10:16 AM
Yeah. The option will be exposed once Ivan finishes the firmware and the LI software. Hehe :)
So I was right ;)
Ivan, this is probably a single integer. Please add it in the next beta release :D
interceptor
03-25-2008, 11:49 AM
i am not sure do we need it, considering, a hardware switch for park/jamm mode.. and a kill switch,... :-)
try to give me situation where you would need it ?
Loiosh
03-25-2008, 12:01 PM
i am not sure do we need it, considering, a hardware switch for park/jamm mode.. and a kill switch,... :-)
try to give me situation where you would need it ?
Ivan, he's talking about having the jammer stop jamming after 4 seconds. I believe you mentioned we could even set it up so that it would jam once, then switch to MILMS mode for the next 5 power cycles?
charles charlie charles
03-25-2008, 12:16 PM
i am not sure do we need it, considering, a hardware switch for park/jamm mode.. and a kill switch,... :-)
try to give me situation where you would need it ?
Ivan, he's talking about having the jammer stop jamming after 4 seconds. I believe you mentioned we could even set it up so that it would jam once, then switch to MILMS mode for the next 5 power cycles?
I'm not sure that is necessary.
If it was possible to use the power switch to change modes between park and jam then that would suit the purpose.
For example, if you get lasered and pulled over all you need to do is turn off then cycle X times the power switch to put LI into park mode. Easy peasy lemon squeezy
ahmadr
03-25-2008, 01:14 PM
Even having it so it would stop jamming after 4 (or n) seconds for a while (1 minute) as the LPP or LE30 would help a lot in case you forget to turn it off (to prevent unwanted JTGs). Personally, I would argue this feature should be enabled by default so novice / idiot users don't go around pissing LEOs off and making jammers illegal.
pilot
03-26-2008, 03:22 PM
Dont change it, I will turn it off if I want, it takes me longer that 4 seconds to slow down, I like to go really fast.
PMoth
03-26-2008, 06:47 PM
Dont change it, I will turn it off if I want, it takes me longer that 4 seconds to slow down, I like to go really fast.
LMAO!!! GET BIGGER BRAKES!!!! If you have brembos and those arent good enough, carbon ceramic is the way to go. :lol:
Ztein
03-27-2008, 03:43 AM
Hi, I am going crazy with SIA warnings. But I will try to set the SIA to max as others here have suggested and see if thats helps a bit.
I want these things..
On boot:
Status on port1, port2, port3, port 4 (Voice)
Disable the SIA (or make an empty voice file).
How to make Voice files..
The LI software cant get the current settings from the CPU box.
Its not a big issue, but I could be ok to check the settings that the CPU have..
Longer cables on the LI heads. +1m minimum.
Longer cables for the 12v power + 50 cm.
I had to make an extention for the rear head.
The front was ok, but could also be 1m longer..
superflyottawa
03-28-2008, 09:00 PM
I can't seem to get the LI software to work. I have two laptops, one with a real serial rs232 port with a cable connected to the LI box, and the other laptop which has the USB to serial port interface.
Neither can see the LI. I get port errors, in use errors, no errors but the LI software just doesn't seem to respond when I click on the 'upload' or the 'load' buttons.
Ideas? Do I need a null modem cable?
J
superflyottawa
03-28-2008, 09:36 PM
Here is a follow up to my last post. I can't get the LI to be seen on any com port using the usb to serial or directly connecting it to an old laptop with a real serial (com1) port.
Error is:
sEvent function called.
1 port not opened.
Technical Information
Project : jammer
Dump error of module <WD110COM.DLL> <11.00Ef>.
- WL Call:
Processing <frmmain.btnConnect>, line <23>, thread <0>
Function <sEvent>, syntax # <0>
- Level: fatal error (EL_FATAL)
- Error Code: 100161
- WD55 Error Code: 0
- No system error code
- No system error message
- What happened?
1 port not opened.
- Debug Information:
Fonction (10,148)
- Attached Information:
EIT_DATEHEURE : 28/03/2008 22:34:32
EIT_PILEWL :
Click btnConnect (frmmain.btnConnect), ligne 23
- No identifier in .err
Help
Anyone have any ideas?
J
I can't seem to get the LI software to work. I have two laptops, one with a real serial rs232 port with a cable connected to the LI box, and the other laptop which has the USB to serial port interface.
Neither can see the LI. I get port errors, in use errors, no errors but the LI software just doesn't seem to respond when I click on the 'upload' or the 'load' buttons.
Ideas? Do I need a null modem cable?
J
i think that you need null modem cable and LI must be powered on...
superflyottawa
03-28-2008, 10:17 PM
I managed to get the LI software working on com port 1 after some serious tweeking.
Question 1: why is the port on the LI only RS232? I mean if it were 1985, yeah, great, but com'on, USB is the standard today.
Secondly, what's with the horrific spelling mistakes in the manual and on the LI config software? This really knocks the product and, IMHO, makes it look like a highschool project. (nice touch scraping off the chip numbers from the ICs inside the box too, really professional).
It's clear to me that the LI is an unfinished product and I hope that the config software develops into a usable program with on screen help/explanations. I work as hardware engineer that specializes in embedded applications and I'd seriously get fired if I let a product like this go into production.
Lastly, all of my emails to LI go unanswered. I guess customer service isn't their forte either.
J
lacning74
03-28-2008, 10:52 PM
I managed to get the LI software working on com port 1 after some serious tweeking.
Question 1: why is the port on the LI only RS232? I mean if it were 1985, yeah, great, but com'on, USB is the standard today.
Secondly, what's with the horrific spelling mistakes in the manual and on the LI config software? This really knocks the product and, IMHO, makes it look like a highschool project. (nice touch scraping off the chip numbers from the ICs inside the box too, really professional).
It's clear to me that the LI is an unfinished product and I hope that the config software develops into a usable program with on screen help/explanations. I work as hardware engineer that specializes in embedded applications and I'd seriously get fired if I let a product like this go into production.
Lastly, all of my emails to LI go unanswered. I guess customer service isn't their forte either.
J
How did you get it working? Also, Ivan himself has always been responsive within a day to my emails or pms. He is also very responsive on his forum when it's working.
http://85.125.82.130/LaserInterceptor/smf/index.php
superflyottawa
03-28-2008, 11:49 PM
I disabled the com1 in my device manager and then assigned my usb to serial cable to com1.
I think that the LI application speaks directly to the hardware com1 port and thus doesn't work well within the windows driver environment.
J
How did you get it working? Also, Ivan himself has always been responsive within a day to my emails or pms. He is also very responsive on his forum when it's working.
http://85.125.82.130/LaserInterceptor/smf/index.php
g-zona
04-01-2008, 03:03 AM
New sw ver. is out:
I remind you it is alpha..
Here are implemented functions:
SIA settings
Parking aid Settings
Sensors asigment
Parking aid Hardware switch (key) enable/dissable
Unknown gun alert enable/dissable
To do list:
Finish voice uploader (curently having problems with events on com port)
Implement Light activatot functioin
Implement Garage door opener function
Implement firmware upgrade check via web
Add multiplatform support
Here is the link..
http://85.125.82.130/LaserInterceptor/LI_Com.exe
It is self extracting archive created with winrar aplication (www.rarlab.com)
You will need free COM port on your computer or USB to COM port coverter. After instaling drivers for USB to
COM please check for number of emulated COM port and adjust to fit in range from 1-6 using device manager under windows.
charles charlie charles
04-01-2008, 03:54 AM
How does the parking sensor switch (key) enable/disable work?
g-zona
04-01-2008, 04:02 AM
How does the parking sensor switch (key) enable/disable work?
To tell you the truth, don't know. Ivan was talking about it like if it's activated then you need to short 2 pins on db9 in order for LI as a jammer to work. If you remove that from db9 then LI works as a parking aid only, no jammer option at all!
muledoe1
04-01-2008, 01:37 PM
im getting an error from com6
Event function called.
1 port not opened.
Technical Information
Project : jammer
Dump error of module <WD110COM.DLL> <11.00Ef>.
- WL Call:
Processing <frmmain.btnConnect>, line <23>, thread <0>
Function <sEvent>, syntax # <0>
- Level: fatal error (EL_FATAL)
- Error Code: 100161
- WD55 Error Code: 0
- No system error code
- No system error message
- What happened?
1 port not opened.
- Debug Information:
Fonction (10,148)
- Attached Information:
EIT_DATEHEURE : 01/04/2008 14:35:08
EIT_PILEWL :
Click btnConnect (frmmain.btnConnect), ligne 23
- No identifier in .err
i tried all the other ports, and all of then say they are being used, i tried changing them but they wont work either. So right now i have no idea.
lacning74
04-01-2008, 01:48 PM
i tried all the other ports, and all of then say they are being used, i tried changing them but they wont work either. So right now i have no idea.
Somewhere in this thread you may have already tried this, but did you use a null modem cable in addition to the usb-serial converter? Also, Ivan released a new update yesterday. Post your issues on his site as well for redundancy.
http://85.125.82.130/LaserInterceptor/smf/index.php?topic=153.0
muledoe1
04-01-2008, 03:56 PM
i tried all the other ports, and all of then say they are being used, i tried changing them but they wont work either. So right now i have no idea.
Somewhere in this thread you may have already tried this, but did you use a null modem cable in addition to the usb-serial converter? Also, Ivan released a new update yesterday. Post your issues on his site as well for redundancy.
http://85.125.82.130/LaserInterceptor/smf/index.php?topic=153.0
i have no idea, how the hell do i do that? I just went to the store and bought the cable nothing else. What is the null modem cable?
lacning74
04-01-2008, 07:22 PM
i tried all the other ports, and all of then say they are being used, i tried changing them but they wont work either. So right now i have no idea.
Somewhere in this thread you may have already tried this, but did you use a null modem cable in addition to the usb-serial converter? Also, Ivan released a new update yesterday. Post your issues on his site as well for redundancy.
i have no idea, how the hell do i do that? I just went to the store and bought the cable nothing else. What is the null modem cable?
A null modem cable crosses over some pin wiring. I remember using one in the old days. :)
I got one from here:
Amazon.com: Null Modem Cable, DB9 F To F, 6ft: Electronics (http://www.amazon.com/gp/product/B000BSLSHA)
They also sell RJ11 6P6C telephone cord to extend your wiring if needed.
I assume you have a usb to male serial cable. If so, you can just connect the above female-female serial null modem cable to it and then the LI.
Good luck!
muledoe1
04-01-2008, 07:40 PM
damn i am so confused. yes i have a serial 9pin male to USB.
so sorry what do you mean "if so, you can just connect the above female-female serial null modem cable to it and then the LI. "
Your talking about the one you linked in the reply? How would that work though, arnt they both 9pin males with no USB?
lacning74
04-01-2008, 09:33 PM
*BEEP* i am so confused. yes i have a serial 9pin male to USB.
so sorry what do you mean "if so, you can just connect the above female-female serial null modem cable to it and then the LI. "
Your talking about the one you linked in the reply? How would that work though, arnt they both 9pin males with no USB?
sorry, i messed up and wasted $5. i should have gotten a female/male null modem serial cable.
computer -> usb/male serial cable -> female/male null modem cable (or adapter) -> LI
ideally, a single usb/male null modem cable would be the best. not sure if it exists. there's also null modem female/male adapters versus cables.
Amazon.com: Cables To Go - 08075 - DB9 M/F Null Modem Adapter: Electronics (http://www.amazon.com/Cables-Go-08075-Modem-Adapter/dp/B000067RW2/ref=sr_1_20?ie=UTF8&s=electronics&qid=1207103671&sr=1-20)
christosxo
04-02-2008, 06:55 AM
ideally, a single usb/male null modem cable would be the best. not sure if it exists. there's also null modem female/male adapters versus cables.
It exists...search on ebay...
You should install its drivers before you use it
lacning74
04-02-2008, 07:42 AM
ideally, a single usb/male null modem cable would be the best. not sure if it exists. there's also null modem female/male adapters versus cables.
It exists...search on ebay...
You should install its drivers before you use it
This cable business is confusion. Wish the LI had a USB port. I now have heard conflicting reports if you need a null modem cable or not. But as per Interceptor:
it is standard null modem cable... RSR232 db9
Do we need a null modem cable? I hope to have all the necessary parts when the software update becomes available.
g-zona
04-02-2008, 07:45 AM
it is standard null modem cable... RSR232 db9
Do we need a null modem cable? I hope to have all the necessary parts when the software update becomes available.
It's pin to pin cable!!! pin 2 - pin 2, pin 3 - pin 3 and pin 5 - pin 5 !!!
lacning74
04-02-2008, 09:47 AM
it is standard null modem cable... RSR232 db9
Do we need a null modem cable? I hope to have all the necessary parts when the software update becomes available.
It's pin to pin cable!!! pin 2 - pin 2, pin 3 - pin 3 and pin 5 - pin 5 !!!
Thanks. Hopefully my cheap usb-serial cable with software driver will work then. I will let y'all know.
muledoe1
04-02-2008, 10:00 AM
so wait you do need pin to pin. but i just bought the pin to USB. should i return it or what? or is there a way i can make it work like this? cause i dont have a pc with a pin so i need usb? Im lost.
repeter
04-02-2008, 12:04 PM
so wait you do need pin to pin. but i just bought the pin to USB. should i return it or what? or is there a way i can make it work like this? cause i dont have a pc with a pin so i need usb? Im lost.
I use a usb to serial adapter. Works great!
lacning74
04-02-2008, 12:52 PM
so wait you do need pin to pin. but i just bought the pin to USB. should i return it or what? or is there a way i can make it work like this? cause i dont have a pc with a pin so i need usb? Im lost.
I use a usb to serial adapter. Works great!
Just to add to the confusion, apparently your usb to serial cable needs to have a ftdi chip as per Ivan's forum. That maybe why your cable isn't working, muledoe1. I'm sure my cheap cable doesn't have that chip either. :(
muledoe1
04-02-2008, 01:44 PM
so wait you do need pin to pin. but i just bought the pin to USB. should i return it or what? or is there a way i can make it work like this? cause i dont have a pc with a pin so i need usb? Im lost.
I use a usb to serial adapter. Works great!
Just to add to the confusion, apparently your usb to serial cable needs to have a ftdi chip as per Ivan's forum. That maybe why your cable isn't working, muledoe1. I'm sure my cheap cable doesn't have that chip either. :(
ok so i have to go buy a usb to serial that has that chip? i spent 30$ on this thing.. what the hell...
superflyottawa
04-02-2008, 01:52 PM
The LI software is still terrible and IMHO it isn't worth buying the cable for just yet.
Once the product is more mature, it should be worth it.
Let's hope that LI listens to their clients and stop releasing alpha versions of software and looks to converting their RS232 antique interface to something a little more modern like USB.
Loiosh
04-03-2008, 01:56 PM
monoprice is a good spot to get cables. Sadly I don't have the link to the exact cable.
The LI software is still terrible and IMHO it isn't worth buying the cable for just yet.
Once the product is more mature, it should be worth it.
Let's hope that LI listens to their clients and stop releasing alpha versions of software and looks to converting their RS232 antique interface to something a little more modern like USB.
what is wrong with letting users test sw and ask for things to add to it? nobody is forcing anyone to use sw...
charles charlie charles
04-03-2008, 04:22 PM
The sw is only useful once firmware updates are downloadable. Until then it serves only to play with
jwardell
04-03-2008, 10:13 PM
Stupid question but I assume the heads must be attached to the unit when updating? I would rather remove the control unit from the car and bring it in to attach it to the computer, but I probably can't get away with that. I need to dig up a laptop somewhere (or a long serial cable...)
repeter
04-03-2008, 10:21 PM
Stupid question but I assume the heads must be attached to the unit when updating? I would rather remove the control unit from the car and bring it in to attach it to the computer, but I probably can't get away with that. I need to dig up a laptop somewhere (or a long serial cable...)
should work w/o the heads
muledoe1
04-03-2008, 10:34 PM
ok, so can someone post a link to what the hell i need to buy to actually make this work? lol I already bought the 9pin to usb and it doesn't. So whats the next step?
ok, so can someone post a link to what the hell i need to buy to actually make this work? lol I already bought the 9pin to usb and it doesn't. So whats the next step?
if you have regular 9 pin serial port on your PC you need pin-to-pin M/F extension cable... if you don't then you need usb to serial converter (one with FTDI converter chip inside)...
repeter
04-04-2008, 06:58 AM
http://microcenter.com/single_product_results.phtml?product_id=0202913
i use that one and it works well for me.
TSi+WRX
04-04-2008, 08:00 PM
The sw is only useful once firmware updates are downloadable. Until then it serves only to play with
Exactly.
It's all fun and giggles now - yes, there's some good feature selections available to the end-user now, but the really good stuff is yet to come. :)
muledoe1
04-06-2008, 10:01 PM
http://microcenter.com/single_product_results.phtml?product_id=0202913
i use that one and it works well for me.
and this one has that chip in it right?
also didnt Ivan just release some new SW for the box?
carlsson
05-20-2008, 03:20 AM
How does the parking sensor switch (key) enable/disable work?
To tell you the truth, don't know. Ivan was talking about it like if it's activated then you need to short 2 pins on db9 in order for LI as a jammer to work. If you remove that from db9 then LI works as a parking aid only, no jammer option at all!
That would be interesting to know which pin have to be cut :P
edweird
05-20-2008, 07:41 AM
That question was posted a while ago on the LI forum, and for what ever reason, it has gone unanswered.
Sometimes, and this is one of those times, I really don't know why communication with the LI team isn't easier. :?:
g-zona
05-20-2008, 08:56 AM
Not shure, but you may try 5 and 7 ;)
carlsson
05-20-2008, 10:47 AM
Thanks a lot G-Zona !
It' one of the most interesting feature on LI, I think that can make the difference between LI and the others, particularly for people who live in a place where jammers are forbidden !
:wink:
th3 factory freak
08-28-2008, 11:39 PM
I have a 9pin to USB cable, I connected the cpu and started the application.
I chose COM 2 and then clicked connect. The following error came up:
"Internal error ocured. Click 'copy' to copy the error details and contact the application provider"
Anyone seen this one?
I have a 9pin to USB cable, I connected the cpu and started the application.
I chose COM 2 and then clicked connect. The following error came up:
"Internal error ocured. Click 'copy' to copy the error details and contact the application provider"
Anyone seen this one?
you have to use same port that is assigned to your cable, so go to Device manager and under section " ports" find your com to usb converter and go to it's properties and advanced settings and there you can define which port it will use.
th3 factory freak
08-29-2008, 10:19 AM
you have to use same port that is assigned to your cable, so go to Device manager and under section " ports" find your com to usb converter and go to it's properties and advanced settings and there you can define which port it will use.
I did, I tried COM2 and COM4, still getting the same error.
lacning74
08-29-2008, 10:22 AM
I did, I tried COM2 and COM4, still getting the same error.
I have only gotten COM1 to work after deactivating the native port.
Laser-InterceptorUSA
08-29-2008, 10:39 AM
Be sure that you have DISCONNECTED all the sensors before using the LI Software!
Cliff - C55
focalcivic
08-29-2008, 05:57 PM
Be sure that you have DISCONNECTED all the sensors before using the LI Software!
Cliff - C55
Does any local store carry the cable, like a radio shack. I have a newer computer, so it will have to be usb type with that "chip" in it?
lacning74
08-29-2008, 06:08 PM
Does any local store carry the cable, like a radio shack. I have a newer computer, so it will have to be usb type with that "chip" in it?
Yeah, you will need that "chip". The IOGEAR USB to Serial/PDA Converter Cable (GUC232A) works. I got it online, though. In general, the cheaper cables will lack the chip and not work. I've been through a few.
cell21633
08-30-2008, 01:00 AM
i recommend the ones which use the prolific chipsets. everywhere you look they're rated highly upon.
Governator
09-05-2008, 02:17 PM
i recommend the ones which use the prolific chipsets. everywhere you look they're rated highly upon.I just purchased the IOGEAR cable from below:
Newegg.com - IOGEAR GUC232A USB1.1 to Serial/ PDA Converter Cable - Adapters & Gender Changers (http://www.newegg.com/Product/Product.aspx?Item=N82E16812107906)
Here's Radio Shack's version:
RadioShack.com - Computers: Accessories: Cables, filters & adapters: Palm GUC232A USB/Serial Adapter for Mac (http://www.radioshack.com/sm-palm-guc232a-usb-serial-adapter-for-mac--pi-2255702.html)
Pay no mind to the "for Mac" as it'll work with both Mac and PC, as well as Vista 64/32 along with XP Pro SP3, confirmed by IOGEAR support.
:beer:
th3 factory freak
09-22-2008, 11:25 PM
Does the CPU needs any power when updating it or can you pull it out of the car, set it on your desk and then use the software? Sorry for the noob question.
Laser-InterceptorUSA
09-23-2008, 06:42 AM
Does the CPU needs any power when updating it or can you pull it out of the car, set it on your desk and then use the software? Sorry for the noob question.
Yes, it does need to be powered up to provide the CPU with voltage. :)
Cliff - C55
th3 factory freak
09-23-2008, 10:26 AM
Yes, it does need to be powered up to provide the CPU with voltage. :)
Cliff - C55
Ok, that might explain why my software couldn't see the unit. :o