PDA

View Full Version : Motorcycle Jammer Control Box



Ovencleaner
03-13-2008, 09:08 AM
I am very new to motorcycles... don't hate.... too much 8)

Where would one put the control box so it does not fry? Also, If I had a Blinder M25 on my bike, would I have to replace the kill switch / LED to make them waterproof?

I am seriously considering buying a Ninja 250r for my first bike and had these initial concerns. I am going to make a custom mount for my Pro 78 much like the one on the Hayabusa posted on this forum.

FlyinZX-10R
03-13-2008, 10:07 AM
Take a motorcycle safety course, its the best money you will ever spend on yourself and your bike. I can't stress how important those courses are. Ive been riding streetbikes since 1991, and wouldnt be alive today if I hadn't taken those courses.

Ovencleaner
03-13-2008, 10:10 AM
Take a motorcycle safety course, its the best money you will ever spend on yourself and your bike. I can't stress how important those courses are. Ive been riding streetbikes since 1991, and wouldnt be alive today if I hadn't taken those courses.

Don't worry, I was allready planning to. I have no plan on killing myself, or being careless and letting others kill me.

I hear the Ninja 250r is a good beginners bike, not enough horsepower to easily flip on my back and kill myself, and is easy to handle because it is lighter or something... I am very new to bikes.

I am trying to see money wise if I could afford to pay the insurance on my bike and keep my car. I was thinking I could ride the bike in good/warm weather and the car in bad/cold weather.

I think riding a bike would make my civic last longer as well :)

zr1
03-13-2008, 11:39 AM
Under the seat is a common spot for the control box. The Blinder also has enough wiring for a car, so on a bike you'll be spooling some of it up under the seat or something. Some bikes have some tiny space inside the fairing, but I don't think the Ninja 250 is one of them as it's pretty slim. The Blinder isn't waterproof, so you'll want to figure out a way to protect it against rain and washing. Cheetah has their "rider" version of the Blinder. They've already shortened the wiring to bike-lengths and waterproofed the whole mess. It's more dollars, but it sounds like they've thought of the little bike-friendly touches.

The Ninja 250 is a great first bike. And the MSF courses are great! The baby Ninja is fantastic on gas, especially with talk of gas going up even further. However, while bikes do save money on the gas, they are generally high-performance machines and require scheduled maintenance more often. For example, my car tires should last around 60k. My bike tires I changed out yesterday after 13k miles. And those two tires cost about as much as four tires would on my car.

But...ohhhhh, do those new tires feel great!

Ovencleaner
03-13-2008, 12:53 PM
Do you people with bikes also drive cars? With the proper equipment I could ride in most weather conditions right?

I think when I go to get the bike I will look around for possible mounting positions... I will find some way to waterproof it...

zr1
03-13-2008, 01:32 PM
Cars? As in steel floor, steel roof, and vertical steel beams connecting the two like a cage? The car gets used for running the daughters around and shopping...and maybe to go get gas for the car. I do about 15k a year on the bike. The majority of it is commuting, but there's also fun times, weekend times, any times, and I try to get a good vacation on the bike each year. Last year was Montana.

I'm in Phoenix though, so just an extra layer or two for the cold months. During the summer some people stop riding, but I ride right through. I'm also set up for wet weather, but we just don't get much of that in the desert. Plus a time or two when the weather was foul, I've driven only because I didn't want to spend the time to clean up the bike afterward.

In places where there are real seasons, ice conditions would deter me on the bike. Though many moons ago, I did suddenly end up in a bit of snow on a Nighthawk S. That was interesting. Interesting enough that I wouldn't do it again.

oh...and if you're getting a bike, Never-ever go to this web site, otherwise you'll end up saving so much money you'll go broke buying really cool stuff for your bike.

http://www.newenough.com

Ok, it's a good place. I enjoy the closeouts section.

sbfuller2
03-25-2008, 03:17 PM
a 250 is a great beginner bike... it's very forgiving. you'll find though if you do any highway commuting that you'll want a bigger bike. trying to pass an 18 wheeler doing 75 is quite a chore on that little bike. passing on a 2 lane road is also not always so easy. the 250 is good for beginners though in that a full twist of the wrist and you don't jump from 70 - 110. it seems that at about 120ish i lose my sence of speed and anything over that feels about the same, it just takes longer to stop. if you can be smooth on the throttle and not panic, and know how to control your urge to fun full throttle everywhere then a bigger bike would be fine... i would venture even to say a 600 0supersport if you like the look... the new 600 are fast on the top end but if you keep the RPM's below about 9000, they are completely gutless. feel free to PM me if you want to take more about bikes... there is also a houston based motorcycle forum you can get lots of info from... www.motohouston.com