PDA

View Full Version : Help, i think i ruined my LI heads



McArcane
04-03-2008, 11:04 AM
so i had an issue today and my front bumper was backed into unknow to me and my licence plate filler plate fell off and was dragging on the ground for a bit before i noticed.....as a result my LI heads dragged on the ground for a bit and got scratched up.....is there any way i can sand them smooth again and they will work or am i screwed and need new heads??

if i need new heads where the hell do i get them? i was getting the sensor 2 connection bad error anyways...haven't been on the forum in a while is elvis no longer the man? where do i get new heads help!!!!!



thanks,

Bobby

Rottman
04-03-2008, 11:14 AM
Oh boy where do we start? :lol:

jaykog
04-03-2008, 11:18 AM
Oh boy where do we start? :lol:

X2 :shock:

Jammer84_03
04-03-2008, 11:38 AM
Oh boy where do we start? :lol:

X2 :shock:
x3...this could get intresting....
i would contact the person who you bought it from. i can almost guarentee that you will have to purchase new heads though since physical damage is not a warranty issue. insurance claim might be in order, but beware of a rate increase.

ivva
04-03-2008, 01:26 PM
so i had an issue today and my front bumper was backed into unknow to me and my licence plate filler plate fell off and was dragging on the ground for a bit before i noticed.....as a result my LI heads dragged on the ground for a bit and got scratched up.....is there any way i can sand them smooth again and they will work or am i screwed and need new heads??

if i need new heads where the hell do i get them? i was getting the sensor 2 connection bad error anyways...haven't been on the forum in a while is elvis no longer the man? where do i get new heads help!!!!!



thanks,

Bobby

see if your local clock servicer has polishing device (for polishing rist-watches plastic cover). i hope you can understand my english :D

lacning74
04-03-2008, 01:44 PM
At least, the head causing the connection error should be replaceable by warranty.

Rottman
04-03-2008, 02:16 PM
At least, the head causing the connection error should be replaceable by warranty. X2 interested to see if they will honor this due to scratches.

jwardell
04-03-2008, 10:14 PM
That really depends on how deep the scratches are. If they're not that bad, you might be able to polish them out with plastic polish like that made for older ipods or from Griots.

interceptor
04-03-2008, 10:20 PM
front lenses are replaceble.. anyhow if your heads are reported as bad you will get set of new ones regardles of phisical damage.. jusy contact your distributor!

Jammer84_03
04-04-2008, 09:30 AM
front lenses are replaceble.. anyhow if your heads are reported as bad you will get set of new ones regardles of phisical damage.. jusy contact your distributor!
wow...thats fricken awesome! warranty level is looking up!

lacning74
04-04-2008, 10:19 AM
front lenses are replaceble.. anyhow if your heads are reported as bad you will get set of new ones regardles of phisical damage.. jusy contact your distributor!
wow...thats fricken awesome! warranty level is looking up!

X2. Ivan always seemed a good guy to me. Once he smooths out the distributor and supply issues, things will be much better for the LI.

Jammer84_03
04-04-2008, 11:16 AM
im trying to get in on that group but over at mazda 6....i think i might be too late though. im not worried about the issues really. i just want the protection and a new gadget to play with :D

McArcane
04-04-2008, 01:27 PM
so how do i get a hold of ivan to get replacement lenses? The bubble part of the lenses is the part that is scratched, but i think ill replace the lenses anyways...anyone have any idea how to go about getting replacements?

thanks for your help!

g-zona
04-04-2008, 01:38 PM
so how do i get a hold of ivan to get replacement lenses? The bubble part of the lenses is the part that is scratched, but i think ill replace the lenses anyways...anyone have any idea how to go about getting replacements?

thanks for your help!

Try to send PM to "interceptor" with the similar request...