PDA

View Full Version : One last VEIL question



marlinspike
02-11-2005, 04:16 PM
Can I put VEIL on my chrome, or does it make it look fugly?
Richard

RacerX
02-11-2005, 05:47 PM
i just ordered some.
i have it, but the weather is lousy, cold and rainy. (figures)
the instructions say ok for chrome parts, but i won't know until i try it.
i'm going to do it as soon as i get a good day, (hopefully tomorrow).
i plan on taking before and after pics, so i can let you know.
i have some chrome trim on the front, and i may try it on my chrome rear bumper.

Veil Guy
02-11-2005, 10:16 PM
marlinspike,

Veil can safely go on chrome. It tends to make chrome look more like a nickle-plated and/or pewter colour.

Before applying VEIL I would recommend that you aim a torch (flashlight) at the front of your vehicle from about 50 paces away in the evening.

Areas that reflect the most light back are the areas recommend for VEIL treatment.

Depending on the angle of the chrome, you may or may not need to use VEIL on these areas.

If the chrome is not wide, I would recommend that use the foam applicator. Before sure to have a damp cloth that you can use to remove any over-paints on the vehicle itself and do it while the temperature is above 45-48F and precipitation is not in the forecast within 24 hours.

After that time it should be very weather resistant.

One more thing. The appearance of the chrome will appear less shiny.

I have used it on my vehicle, and I actually think the final appearance is pretty cool.

Good luck and let me know how it turns out.

The Veil Guy 8)

marlinspike
02-11-2005, 11:04 PM
I don't know if this matters but I should add to the eqaution, it's 19 year old chrome and father time has taken his toll. Does this matter? Oh, and I'll let you know how it goes, just gotta wait for the stinkin student payroll payment.
Richard

Veil Guy
02-11-2005, 11:19 PM
I would expect not. How much chrome are we talking here?

Can you send me a pic?

Is it pitted, rusted, or in good condition.

Perhaps you would want to try it on an inconspicuous area.

The Veil Guy 8)

marlinspike
02-11-2005, 11:35 PM
Not my car, but the same body
http://home.concepts.nl/~vlimmere/images/300SD.jpg
It's not rusted or pitted, just oxidized and scratched from pebbles and what all. Also, the top of the bumper is covered in chrome. You think I should bother VEILing that?
Thanks,
Richard

marlinspike
02-11-2005, 11:38 PM
Also, the FAQ's say to apply VEIL onto a plate cover. Plate covers are illegal in MD. How much effectiveness does VEIL lose by going straight on the plate?
Thanks,
Richard

Veil Guy
02-12-2005, 07:14 AM
I don't believe VEIL loses "effectiveness", in and of itself, by going directly to the plate.

Many of our European colleagues do just that - apply to their number plates.

The reason we recommend a plate cover it because one can apply two coats, one front and one back, and the coat on the inside is especially protected from the elements. For highly light retro-reflective this does make a difference. In this case, two coats are better than one.

Depending on the colour of your plate, you be able to get away with one. If you plate's light (ie; white) then two is likely essential for maximum protection. Be prepared, though, that your plate may be noticeably darker - which may or may not present a problem for you.

If you do opt to do two coats, leave plenty of time between applications so that the bottom layer sets up well.

I have found that using a bathroom sink works very nicely as a plate holder. Be careful not to let VEIL collect around the letters/number embossings and I would recommend that you use the nie brush that was provided with the product [instead of the applicator.]

Please let me know how it works out for you.

The Veil Guy 8)

marlinspike
02-14-2005, 07:50 PM
Ok, the check came in, so I'm gonna order VEIL tomorrow. My question is this: you said apply it with temps above 45-48F. How many hours after application can it drop before that. I'm either going to have it overnighted to me and apply it on Thursday with a high of 52 but a low of 21, or just have it sent to me ground and either hope I get a warmer day between the 23rd and 26th (speaking of which, how soon after application can you drive?) or wait until I get back home to apply it since I'll have a garage to keep the car in there. Why oh why did it get cold all of a sudden? It was in the upper 60's just a few days ago.
Richard

RacerX
02-15-2005, 12:21 AM
marlinspike,
i've had the same lousy weather problem. yesterday i applied veil (low 60's), but it got cold last night (parked outside) and some of it cracked.
the cracks were in areas where it was applied heavier though.
this stuff is somewhat of a p.i.t.a. to use. i did a headlight with each applicator (brush and sponge) and i like the sponge better, as it seems to leave less streaks, but it also holds more liquid, so it tends to run a bit. i don't like the overall way it looked on my lights or chrome, so i removed it this morning. another p.i.t.a.
tomorrow if the weathers good, i'm going to try it again. it's not quite what i expected, and i'm also a perfectionist, so i want it to look nice, and not like something painted on, which it did. i have plenty of painting and woodworking, staining and lacquer finish experience, so it's not that i have a problem there.
i've got before and after pics, and i'll take some more.

Here's what i did wrong/what i'll do different.
1. i bought 2",3",and 4" sponge brushes. this should make it easier to spread/smooth it out.
2. once you get a coat on, leave it. even if it looks "thin" in a spot. each additional coat WILL darken it. one of my chrome strips looked like it had flat black spray paint on it.
3. additional coats will get darker and darker. the more i tried to even out the look, the darker things got. i think the wider brush will help.

i don't know if additional coats add to the protection (range reduction), or not, so maybe The Veil Guy can answer that.

also, they include a copy of the sml report with it. if you have a dark colored vehicle, veil will give around a 50% reduction in range (nice). if you have a light colored vehicle though, it didn't really help. so for those light colored vehicles, i'm thinking you might need a hood bra if your going to use veil.

one more thing. have a bottle of rubbing alcohol handy.
i think the headlights/fog lights will look good when i'm done, but i'm not sure about the chrome trim. i'll work with it and see how it goes.

Veil Guy
02-15-2005, 12:48 AM
A couple of items worth commenting on.

We have found that Veil tends to coat much better when the temperatures are about 55 and above. Things can get a little funky in the 40s.

I recommend applying your finishing strokes in the horizontal directions and not in an overly repeated function. You should not be seeing streaks.

You are correct that we did not do as well on a lighter vehicle in Carl's test of 2003 (which included in the SML test results.) That was GEN I.

Last year in 2004, however Veil did much better all around on dark, med, and lighter cars. The material used was GEN 2.5. We are now at GEN III which mainly dealth with improved coating abilities in a greater temp range and a slightly more neutral gray colour balance.

We don't think it is necessary to apply multiple coats on any headlight, foglight, chrome, parking lights.

Highly reflective license plates that are light coloured appear to do better with two coats (or one front/ one back on a clear/colourless plate cover).

Chrome tends to look like its nickle plated after a Veil treatment and somewhat less glossy (the desired effect).

To determine if you really need to do chrome, shine a torch (flashlight) on the vehicle at night from a point far enough away that the beam pattern covers the entire front. This way, you will really know what you dealing with.

Using a hair dryer in colder weather can help avoid cracking from the freezing cold temps in the evening / day. Of course, after it sets-up you should be able to encounter just about every weather condition imaginable without any problems.

I have some digital video's of application and removal procedures that work that we took on our recent trip out west.

I will post them shortly on our www.laserveil.com web site for review.

I am somewhat disappointed to hear that you are having some difficukty with your application. Keep me posted as to your progress and I hope these comments will help you out.

BTW, here are the summary results of our VEIL testing at SML in June 2004 where you'll see some nice improvements over our first appearance at Carl's testing. We got reductions up to 77%!!!

http://www.radarbusters.com/support/speedlabs-2004/veil.asp

The Veil Guy 8)

marlinspike
02-15-2005, 03:12 AM
Hmm, looks like I'll be holding off on applying VEIL until I have garage access. I have to admit that I'm not keen on dulling my chrome, though I may not bother with the chrome since I'm sure the nice white MD front tag would prove a much more compelling target for the cop. So, is the stuff that's currently shipping Gen 3?
Richard

Veil Guy
02-15-2005, 08:10 AM
Has been since last December.

Try the light shining trick. It will give you a lot of info about what is actually the most reflective on your particular vehicle.

For the record, I don't often treat the chrome accents on my vehicle as we have demonstrated substantial improvements without doing so. Its our belief the chrome is the at best, a tertiary contributor to your visual signature.

Check out this link: Police Laser, Lidar (http://www.laserveil.com/laser-info/) Information

Perhaps we will perform some specific chrome-related test in the future since we can selectively eliminate each contributing factor and actually measure the impact on laser targeting distances. Hmm - sounds interesting...

At any rate, I will be posting some video clip links here for your review so that you can actually see how east it is to obtain a nice smooth application (no streaks, etc) and removal process - weather permitting, of course. We recorded these on our trip out West when we were conducting our extensive radar detector review - the results of which will also be released shortly after we complete all of the editing.

Give me a little time and I'll have those clips for you momentarily...along with a couple new before/after shots.

I want your Veil experience to be [i]right for you so let's work this issue out...

The Veil Guy 8)

SETITOFF
02-15-2005, 11:13 AM
Veil Guy, I like the suggestion to use a blow dryer to regulate the curing treatment process. Is that helpful tip included in the application instructions? That may be the missing link to a perfect application process.

RacerX
02-15-2005, 11:28 AM
The Veil Guy,
thanks for the updated info and tips.
it's cloudy today, but they don't expect rain for a few more days.
One of the reasons i was wondering about the additional coats, was that my headlights are large ( tundra DC) with a large chrome/reflective area inside. the grill has chrome strips (about 2" thick) that go across the front, between the headlights.

If you decide to do those tests, and it's in AZ, let me know, i'll bring my vehicle if it fits the criteria.

SETITOFF,
you beat me to it. i was previewing my post when i saw yours.
the instructions don't mention the dryer. i was going to suggest an adendum with additional tips, if re-doing the manual is to expensive.


The Veil Guy,
is that report done yet? i can't wait to read it.

happya$$
02-15-2005, 11:40 AM
The review is the BEST I have EVER read. It is HONEST and thorough. I enjoyed the hell out of it. TRUST me it is worth the wait.

RacerX
02-15-2005, 12:00 PM
:evil: you tease, your killing me. :)
so when do the rest of us get to "enjoy the hell out of it?"

Veil Guy
02-15-2005, 12:07 PM
SETITOFF,

Negative. But it's a good idea. This is good timing because we will be going to print an updated instruction manual soon.

If it is not already on the Veil site under FAQs perhaps it deserves a place there.

Thanks for the good suggestions, guys.

The Veil Guy 8)

SETITOFF
02-16-2005, 07:21 AM
No Problem Veil Guy, that tip only costs you one free sample. :D Just kidding, I know you guys have kids to feed.

sethy
02-16-2005, 08:44 AM
No Problem Veil Guy, that tip only costs you one free sample. :D Just kidding, I know you guys have kids to feed.
When I have kids- they are going to have to fend for themselves :)

RacerX
02-16-2005, 02:32 PM
Okay, i re-applied it today.
i am much happier with the results. here's what i did.
the temps are low 60's today, and cloudy.
i used a dryer to warm everything up a bit. they were cool, so i brought them up to luke warm.
i put some veil in a small paint tray and used a 4" sponge brush on the headlights. this worked well and made for smooth easy strokes. the larger brush seemed to help avoid overlap.
the one thing to remember with the sponge is that even though the tip looks damp, it's holding a lot of liquid, so i dabbed out the excess in the paint tray. this gave it a nice thin coat.
i used a 2" for the chrome trim. this one fits the veil can, but you still need to dab the excess out.

As for looks, the headlights look like they have a slight "tint" to them.
the chrome looks like it has a slight "tint" also.
With the headlights you would have to look close and be looking to see "something" on it, to notice it.
the chrome was still more of a pain to get uniform. (it seemed like veil applied easier to the headlights).
Maybe this is due to the lights being "clear" so you may not notice a slight variation, where the chrome is "solid" so anything on it shows more.

i have a steady hand, so the only thing i did was place a piece of cardboard under each headlight when i was working on it. Depending on the vehicle and location of lights, etc, masking is a good idea.
Have some rubbing alcohol handy and some rags, for any cleanup,wipe up.
After finishing, i used the dryer on low, to dry everything to the touch.
If you decide you may want a second coat, wait till it is completely dry, or it will smudge what you've done.
Good luck and i hope this helps.

oh, and i do have before and after pics with some closeups.

marlinspike
02-16-2005, 02:35 PM
Need a place to host the pics? Send them over to me at rishayegan at davidson dot edu (if it bounces use www.yousendit.com instead).
Richard

Veil Guy
02-16-2005, 09:53 PM
RacerX,


I am most pleased that you were able to get better results. This is as it should be.

If you are in a position send 'em to me for a look. Id like to see how they came out.

The Veil Guy 8)

RacerX
02-16-2005, 10:18 PM
marlinspike,
thanks, i may take you up on that.

The Veil Guy,
No problemo. let me know where to send them. i'll give you all the ones i took. i'm packing for a long weekend road trip, so it'll probably be Mon, before i send em.