PDA

View Full Version : Escort Zr4 Installed 02 civic *Video*



maple50175
05-24-2008, 02:18 PM
Here is a video of the Zr4 Installed on my civic.

Enjoy:

As you can see i used some stupid headunit remote, it worked but took forever for it to go off. If i got a laser tested it would be quicker but yeah


Enjoy!


YouTube - Escort Shifter ZR4 Laser Jammer Cincinnati Mircowave (http://www.youtube.com/watch?v=5aQtv36sc7E)

Lucky225
05-24-2008, 02:27 PM
weird, I could never get a remote to activate the zr3 jammers :/

maple50175
05-24-2008, 03:53 PM
weird, I could never get a remote to activate the zr3 jammers :/

Is that good or bad?

Lucky225
05-24-2008, 03:56 PM
weird, I could never get a remote to activate the zr3 jammers :/

Is that good or bad?

Donno... I have got laser alerts tho, and even falses (everytime I drive by Movie Gallery the florescent lights set off the front jammers) I think it has to be a certain pulse rate for it to get set off or something.. then again the ZR4 heads seem to be super sensitive to IR as shown in CBRs videos.. so maybe that's why a regular remote will set it off vs. ZR3

crazyVOLVOrob
05-24-2008, 09:56 PM
only problem with your install is those huge ass headlights...

Happya$$ use to use tinted headlight covers coated with veil and had great performance...but definitely take the covers off at night

maple50175
05-25-2008, 07:34 AM
only problem with your install is those huge ass headlights...

Happya$$ use to use tinted headlight covers coated with veil and had great performance...but definitely take the covers off at night

yeah i know :( I wanna get veil once its in stock for sure.

I am also planning to black house my headlights too. SO that should help a little

happya$$
05-25-2008, 08:06 AM
There is only ONE true black stealth 2002 Civic and that is MINE! :evil:

mrcllusb
05-25-2008, 08:13 AM
How about a stealth Mercury Milan with tinted windows and veiled head and tail lights :D ..

maple50175
05-25-2008, 08:33 AM
There is only ONE true black stealth 2002 Civic and that is MINE! :evil:

got pics haha

ahmadr
05-25-2008, 10:07 AM
I am also planning to black house my headlights too. SO that should help a little
Not really

maple50175
05-25-2008, 10:11 PM
I went to CT to for that meet to test it and noone was there or they left before I got there.

Kinda pissed about that.

PMoth
05-26-2008, 07:54 AM
I went to CT to for that meet to test it and noone was there or they left before I got there.

Kinda pissed about that.

Responded to this in the other thread.

focalcivic
05-29-2008, 01:03 PM
Maple, when you mounted the rear head how did you route the wire into the trunk?

maple50175
06-04-2008, 01:35 PM
Maple, when you mounted the rear head how did you route the wire into the trunk?


LoL I was in a rush so I took a drill and drilled a hole in my license plate light on the side.


see with the rear installed it does block out light though. Could be a reason to get pulled over. but who knows.

djrams80
06-04-2008, 02:48 PM
see with the rear installed it does block out light though. Could be a reason to get pulled over. but who knows.I had the same problem with my rear shifter blocking my license plate light. This is how I solved that problem. I removed the bulb from the normal license plate light. I replaced my normal license plate bolts with ones that have LED lights inside them that point down towards the license plate to illuminate the plate and wired them to the same power wupply as the normal license plate light. I then got pulled over because they were not the right color. The LEO said they were blue, but they were really bright white, which kind of looks blue, kind of like HID headlights, which are bright white, but also look kind of blue. So, I then painted them with a thin coat of yellow paint that I got from a hobby shop. Now they look almost normal and I have had no problems since.

Atlas
06-04-2008, 05:38 PM
DJ, can you post a close pic of the rear head with the illuminated bolts and possibly let us know where you found them? I may run into the same problem.
Thanks.

focalcivic
06-04-2008, 07:46 PM
I was thinking for appications where it might block the light, to mount the head on the lower holes of the plate instead, might not look as good but at least it will not block the lighting.

djrams80
06-04-2008, 08:02 PM
I got them off of Ebay a long time ago. I have no idea where to get them now. Anyhow, here are the pics:
http://img238.imageshack.us/img238/359/imag0049ct6.jpg (http://imageshack.us)

http://img503.imageshack.us/img503/9974/imag0050ia0.jpg (http://imageshack.us)
http://img503.imageshack.us/img503/1055/imag0051xj2.jpg (http://imageshack.us)
http://img238.imageshack.us/img238/1800/imag0052axk8.jpg (http://imageshack.us)
http://img503.imageshack.us/img503/3900/imag0053aec0.jpg (http://imageshack.us)

Atlas
06-05-2008, 04:50 AM
Thank you for the pics. I'll keep an eye out. Looking to order the RD as soon as a few more post up their opinions/likes/dislikes.

focalcivic
06-07-2008, 02:29 PM
I could sworn I have seen those lighted bolts somewhere, maybe in the accessories section of a parts store.

djrams80
06-07-2008, 02:53 PM
I could sworn I have seen those lighted bolts somewhere, maybe in the accessories section of a parts store.Check your PM.