View Full Version : Will ZR4 heads fit in this grill..
mrcllusb
06-19-2008, 12:07 PM
I'm thinking of purchasing the new Infinity G35(I know guys,sorry about the laser cruise issue) and i'm looking at installing the 9500CI and i can't tell if the heads will fit on either side of the Infinity emblem.
http://i297.photobucket.com/albums/mm233/oleblake/Infinityg35front2-1.jpg
http://i297.photobucket.com/albums/mm233/oleblake/Infinityg35front.jpg
djrams80
06-19-2008, 12:15 PM
I'm pretty sure they'll fit. The question I would have would be how well they can protect those headlights.
mrcllusb
06-19-2008, 12:22 PM
I had thought of Veil G4 for the headlights.Like yourself DJ,i like to stick with an all-in-one system,even if my protection will suffer a lil bit.
DogGod
06-19-2008, 12:51 PM
Lots of chrome up front.
If I were you I would mount them in the lower grills under the headlights, then mount the rear head in the grill above the licence plate. My fear with the heads in the chrome grill would be headlight coverage.
djrams80
06-19-2008, 01:29 PM
Lots of chrome up front.
If I were you I would mount them in the lower grills under the headlights, then mount the rear head in the grill above the licence plate. My fear with the heads in the chrome grill would be headlight coverage.Roy was told by Escort not to do this:
YouTube - Shifter ZR4 - Speed of Light Protection (http://www.youtube.com/watch?v=GpSjGZ4PnBk)
djrams80
06-19-2008, 01:30 PM
I had thought of Veil G4 for the headlights.Like yourself DJ,i like to stick with an all-in-one system,even if my protection will suffer a lil bit.You'll love the 9500ci! :D
mrcllusb
06-19-2008, 01:45 PM
You'll love the 9500ci! :D
I know i will brotha.I really like the way my RX75 performs,and if the 9500CI is even better than that,i'll need two!!Wife gave me the go ahead to buy it now as my return from iraq gift(isn't she great!!!!).I told her i would hold off for a little bit though and for now just get some more pieces for my Sonor drumset:D..
mrcllusb
06-19-2008, 01:54 PM
Lots of chrome up front.
If I were you I would mount them in the lower grills under the headlights, then mount the rear head in the grill above the licence plate. My fear with the heads in the chrome grill would be headlight coverage.
Since i'm not a speeder,maybe 5 to 7 over on the highway,i don't need any JTG performance.All i look for is mostly knowing i'm being tagged.With the ZR4 heads and Veil G4,i should have enough warning i think.If i'm right,i think there is an after market black grill that i can purchase.
Qui-Gon
06-19-2008, 02:37 PM
...Wife gave me the go ahead to buy it now as my return from iraq gift(isn't she great!!!!)...
Thank God you came home alive, man. And yes, that is VERY nice of your wife!!! I always wanted a concealed detector...man am I jealous (wish MY wife was as generous!).
Enjoy your new toy!!!!!
DogGod
06-19-2008, 11:27 PM
Roy was told by Escort not to do this
Personal experence says otherwise. ZR3 2 heads upfront, I had large PT's until I added headlight covers. Added the third head upfront and got stellar results.
mrcllusb
06-20-2008, 06:52 AM
No home yet my friend but close to it.This tour was 15 months and i'm beat!!! My wife,yeah she's the best.She lets me install whatever i want into her vehicle as long as it works like it's supposed to she's happy.I've got a Clifford 50.5X alarm/remote start with all a few extras i gotta do in it once i get back..Good thing i went to school for electronics and electrical engineering before i came into the military.I want to go to auto sound/security school and get MECP certified,but they're aren't any close to me.
mrcllusb
06-20-2008, 06:54 AM
Personal experence says otherwise. ZR3 2 heads upfront, I had large PT's until I added headlight covers. Added the third head upfront and got stellar results.
I know the rear head on my RX75 Pro Plus doesn't really do much,but knowing i'm being tagged from the rear is what i look for..
TSi+WRX
06-20-2008, 06:57 AM
Personal experence says otherwise. ZR3 2 heads upfront, I had large PT's until I added headlight covers. Added the third head upfront and got stellar results.
^ The ZR4's rear head supposedly fires the return jamming signal in a slightly temporally displaced manner, when compared to its front heads - this mis-sync is Roy's (and everyone's) concern.
I don't think, to-date, that anyone has yet confirmed this issue, either way, but it's definitely good to note.
It's well known that the "enthusiast's mounting" for the ZR3 was very, very successful, but currently, the same for the ZR4 can only be said to be approached with caution, and should be used in manual-stated mounting configuration until the former has been proven.
----
mrcllusb, I'm honestly afraid of whether or not you'd be able to displace the heads far enough to either outboard edge of the vehicle (due to how much the grill seems to taper "inwards" on each of its outboard ends) to effect proper headlight coverage, with an in-grill mount.
It seems that there's more complicated angles within that grill than it's possible to visualize via pictures, and that could present additional leveling/alignment challenges, too.
mrcllusb
06-20-2008, 07:11 AM
I see what you mean.I just studied the picture a little more.
http://i297.photobucket.com/albums/mm233/oleblake/Infinityg35front2-1.jpg
Even the grill area where fog lights would go has a slant to it.So either i would have to shim the mount,change the grill or get real creative with my dremel:).
focalcivic
06-20-2008, 10:08 AM
mrcllusb, I'm honestly afraid of whether or not you'd be able to displace the heads far enough to either outboard edge of the vehicle (due to how much the grill seems to taper "inwards" on each of its outboard ends) to effect proper headlight coverage, with an in-grill mount.
It seems that there's more complicated angles within that grill than it's possible to visualize via pictures, and that could present additional leveling/alignment challenges, too.[/quote]
I concur
mrcllusb
06-20-2008, 01:10 PM
Decisions,decisions..