View Full Version : I know radar Roy says it hurts performance, but what do you guys think?
06blackgto
07-31-2008, 09:20 AM
Okay I have the zr4 I have g4 hopefully on it's way. Im just wondering if it really hurts to put the back shifter on the front plate, and run all three shifters?
I really don't understand how it would hurt? but I thought I would get someone else's personal opinion if they have done it or not?
I never see the leo's in ks or mo. hit from behind w/laser. and I think the rear shifter would do me more good on the front.
any real world experiences?
ahmadr
07-31-2008, 09:31 AM
Maybe GOL has already tested it ;)
erickonphoenix
07-31-2008, 09:34 AM
If it's just suspected to hurt performance I wouldn't do it.
Your also giving up rear detection BTW, which is important even if you can't jam very well from the rear.
Unless your up against an Ultralyte it should do fine. In my experience, even if you encounter an Ultralyte you can probably beat the Punch Thru anyway, if your on you're toes.
TSi+WRX
07-31-2008, 09:57 AM
I'd like some secondary confirmation, before mounting the rear head to the front.
Roy is a knowledgeable person - and I think he might have specifically questioned Escort to those ends. If they're saying that it mis-sync's, that's a legitimate concern.
AirMoore
07-31-2008, 10:07 AM
I'd like some secondary confirmation, before mounting the rear head to the front.
Roy is a knowledgeable person - and I think he might have specifically questioned Escort to those ends. If they're saying that it mis-sync's, that's a legitimate concern.
X2. I really think until there is some confirmation (via testing) one way or another... its better to hold off on it. I can't see that Escort (or Roy) would say that if they had no concerns about the issue...
06blackgto
07-31-2008, 10:16 AM
Okay, I'll hold off. unless someone test it and it proves to help...:)
edweird
07-31-2008, 05:27 PM
At one of the CFL tests (#2 I think) we tested the ZR3 rear head ONLY on the front of my car.
It did decent on center mass shots, but headlight shots were subject to PT's. I'd think mounting the other two heads out by the headlights would help, but we didn't test that.
Z1NONLY
07-31-2008, 05:38 PM
I have run 3 different ZR3's on three different cars. I have been "saved" in all three cars and tested two of the cars with the CFL group.
All three were in standard form (2 front, 1 rear) and they all worked as advertised. I don't know if all three up front hurts, but 2 front, 1 rear works well.
I just opened up my new ZR4 and noticed that the cable for the rear head is about twice as long as the front. Maybe this has something to do with the "timing" difference? With the current in those cables traveling at nearly the speed of light, it shouldn't make that much of a difference, but then jamming seems to require abnormally high levels of precision.
focalcivic
07-31-2008, 11:32 PM
I have run 3 different ZR3's on three different cars. I have been "saved" in all three cars and tested two of the cars with the CFL group.
All three were in standard form (2 front, 1 rear) and they all worked as advertised. I don't know if all three up front hurts, but 2 front, 1 rear works well.
I just opened up my new ZR4 and noticed that the cable for the rear head is about twice as long as the front. Maybe this has something to do with the "timing" difference? With the current in those cables traveling at nearly the speed of light, it shouldn't make that much of a difference, but then jamming seems to require abnormally high levels of precision.
I think the cable length has more to do with ease of installs.
MEM-TEK
08-01-2008, 12:53 AM
I don't think that the cable length has anything to do with it. My guess is that the rear shifter has a much broader emission beam pattern which could conceivably be picked up weakly by the two front shifter heads if the rear shifter head is also installed up front. Possibly the result could be that the two front shifter heads then start trying to shift the weakly detected shifted emissions from the rear shifter when it too is installed up front? This is just a wild guess.
Heck, this post might be the first time I have pegged out my BS meter in quite some time! :D
Z1NONLY
08-01-2008, 06:05 AM
I think the cable length has more to do with ease of installs.
I'm sure.
I was just saying that it might have other effects too.
Veil Guy
08-01-2008, 06:33 AM
Guys,
My understanding of the rear-head mounting issue has to with the idea that the rear head fires (essentially out of phase with the fronts) in an asymmetric fashion and since active jammers employ very specific interference pulse rates that the three heads together might interfere with each others interference/destructive pulse-train.
I believe that is why Roy has made this recommendation, and I believe he proved it out at his test site, some time ago...
Veil Guy :cool:
thestaton
08-01-2008, 07:07 AM
With the ZR3 it did better with the rear head in the front, and I would assume this is the case for the ZR4 as well.
The rear head is useless in the rear anyhow, so might as well put it to some use.
TSi+WRX
08-01-2008, 07:22 AM
With the ZR3 it did better with the rear head in the front, and I would assume this is the case for the ZR4 as well.
That definitely seemed to be the case with the ZR3, but with the ZR4, again, I think that with the current recommendation from more than one individual who has a direct vein into Escort, I'm rather cautious in recommending a similar "enthusiast's mounting."
The out-of-phase/temporal-sync theory does add-up, and has been a topic of cross-talk, er, talks :o for quite some time now.
I think that both MEM-TEK's theory (and it's not *that* far-fetched, MEM, as I truly think that the unique physical build of the Blinder 0-suffix series heads - which are IR-transparent for their entire forward portion - is what causes so much of its observed cross-talk troubles, when used in conjunction with other jammers, adjacent/nearby) as well as the wire-length theory (the latter has been a cited caution for those looking to extend their LI heads, with the caution coming from the LI team itself) holds water to some degree.
What's really the issue may never be fully known - but I, as well as others here, I think, would love to see some conclusive hobbyist testing of if what Roy and others with a vein into Escort have reported is "actual-truth."
:)
Z1NONLY
08-01-2008, 04:53 PM
I have at least one save from my rear shifter.
In testing, as long as the plate is targeted, the ZR3 jamms well.
Because the plate is very reflective and located at center-mass on most cars, LEO's have no reason to aim at any other part of the back of the car. What else is more reflective than a tag?
Z1NONLY
08-01-2008, 05:00 PM
Guys,
My understanding of the rear-head mounting issue has to with the idea that the rear head fires (essentially out of phase with the fronts) in an asymmetric fashion ...
Why go through the trouble of designing the front and rear out of phase if it's not simply a byproduct of other factors? (I.e. different components for the different-shape shell on the rear shifter or the need for a longer cable on the rear shifter.)
I just don't think that, after getting all the different jamming algorithms nailed down, one of the engineers said, "Ok guys, now lets figure out how to make the front and rear operate out of phase with each other."
ahmadr
08-01-2008, 05:16 PM
I don't think that the cable length has anything to do with it. My guess is that the rear shifter has a much broader emission beam pattern which could conceivably be picked up weakly by the two front shifter heads if the rear shifter head is also installed up front. Possibly the result could be that the two front shifter heads then start trying to shift the weakly detected shifted emissions from the rear shifter when it too is installed up front? This is just a wild guess.
Heck, this post might be the first time I have pegged out my BS meter in quite some time! :D
Honestly, I think Roy (or was it Veil Guy) was BSed by belscort. The processing is done on the heads on the ZR4, so it's no worse than having two different jammers on a car.
However, IF what Roy/VG/belscort has claimed is indeed true, MEM-TEK's explanation may be the best.
So my :bs2: flag this time tentatively goes to belscort, but definitely not memtek :D :lol:
focalcivic
08-01-2008, 08:16 PM
When Roy did the initial testing with Escort's engineers, they tried all 3 heads up front found no benefit, and I believe a slight issue with running all 3 up front. Escort's engineers never thought of running all 3 up front when designing it in the first place and when Roy mentioned that it was somewhat common with the older Zr3 they seemed surprised.
Here is the quote from Roy's blog:
"
First many users of the ZR3 that I met with in the past also mounted their rear laser jammer to the front figuring if two heads work well, three heads would be even better. In mentioning this to the engineers they related that the two front laser jammers are designed to operate at a different pulse rate than the one rear head and that because of this the front jamming effectiveness could actually decrease if all three heads were placed in the front. Not one to miss a challenge, we actually took some time to test this at our new testing facility and yes, in some situations we did notice a decrease if jamming when all three heads were all placed in the front.
We then explored using splitters on the output of each head allowing us to plug in four jammer heads to the front. At the time Escort’s engineering staff never explored the possibility of a “diehard” laser jammer enthusiast going out buying two ZR4 shifters (http://www.radarroy.com/links/zr4.htm) and installing all four heads to the front in one system and they didn’t know how their hardware/software would perform in such a situation. Again not one to miss a new opportunity we did test this scenario, however for our application we did not notice any significant performance results that we could measure."
TSi+WRX
08-03-2008, 10:12 AM
^ That's strange......
Why would a 4-head setup - adding two more FRONT heads, either split or independently controlled via a separate c-box - of the ZR4 *not* return with better results? Wouldn't it be akin to the comparison between a 2-head Blinder, versus a 4-head?
And this also doesn't seem to make sense, from what we know of the function of the single rear-head -> with Cbr and ELVATO's test, using the Stalker, as long as the Stalker's beam is within enough proximity of the jammer head ( "shooting at the head," in our "community speak" ;) ), it'll provide even rear-of-vehicle coverage.
So one would imagine that with more heads, it's harder for the LIDAR beam to not "find" a "target head" within sufficient proximity, right?
So, then, why would a 4-head ZR3, with two sets of front heads being dedicated towards that aspect, with no worries of temporal-mismatch/pulsetrain lag, *not* offer better protection than with 2 heads?
I don't get it. :confused:
----
And FWIW, ahmadr and Z1, I agree with your doubts/thoughts.
I just would like to see some independent proof to either confirm or deny what's been reported to Roy and The VEIL Guy, that's all.
focalcivic
08-03-2008, 09:54 PM
^ That's strange......
Why would a 4-head setup - adding two more FRONT heads, either split or independently controlled via a separate c-box - of the ZR4 *not* return with better results? Wouldn't it be akin to the comparison between a 2-head Blinder, versus a 4-head?
And this also doesn't seem to make sense, from what we know of the function of the single rear-head -> with Cbr and ELVATO's test, using the Stalker, as long as the Stalker's beam is within enough proximity of the jammer head ( "shooting at the head," in our "community speak" ;) ), it'll provide even rear-of-vehicle coverage.
So one would imagine that with more heads, it's harder for the LIDAR beam to not "find" a "target head" within sufficient proximity, right?
So, then, why would a 4-head ZR3, with two sets of front heads being dedicated towards that aspect, with no worries of temporal-mismatch/pulsetrain lag, *not* offer better protection than with 2 heads?
I don't get it. :confused:
----
And FWIW, ahmadr and Z1, I agree with your doubts/thoughts.
I just would like to see some independent proof to either confirm or deny what's been reported to Roy and The VEIL Guy, that's all.
I think it is because the programming for the 3rd head, this is intended for the rear only.
TSi+WRX
08-04-2008, 07:58 AM
^ I understand that. :) That's supposedly the current thinking, claimed, as to why the old "three-heads forward" "enthusiast's setup" of the ZR3 won't translate to the ZR4.
But what I'm asking, by citing your post above, is instead why a 4-head forward (two front heads, x2), either via splitter or another control-box (i.e. total system), setup of the ZR4, according to Roy, did not show any improvements.
thestaton
08-07-2008, 08:52 AM
Why go through the trouble of designing the front and rear out of phase if it's not simply a byproduct of other factors? (I.e. different components for the different-shape shell on the rear shifter or the need for a longer cable on the rear shifter.)
I just don't think that, after getting all the different jamming algorithms nailed down, one of the engineers said, "Ok guys, now lets figure out how to make the front and rear operate out of phase with each other."
haha, I don't think you know Escort engineers.
focalcivic
08-07-2008, 09:24 AM
I don't think that the cable length has anything to do with it. My guess is that the rear shifter has a much broader emission beam pattern which could conceivably be picked up weakly by the two front shifter heads if the rear shifter head is also installed up front. Possibly the result could be that the two front shifter heads then start trying to shift the weakly detected shifted emissions from the rear shifter when it too is installed up front? This is just a wild guess.
Heck, this post might be the first time I have pegged out my BS meter in quite some time! :D
Actually, that might have something to do with it. Think of it this way the rear head might be timed different than the front heads, I wonder in essence it might cause a cross talk issue with itself?
Sosticegxp
08-22-2008, 05:20 PM
I am brand new to the forum and have only just retaken ownership of my bank account from the greedy ass city photo enforcement hounds.....
I just installed my ZR3's on my Solstice GXP - the only place to do so was behind the honeycomb grill. I called Escort and the tech said that is the place for them and it will work fine...If anyone has seen the front end of a Pontiac Solstice GXP please let me know your thoughts....I have also just purchased VEIL it is on its way...When I put that stuff on my front lights, fogs and indicators and on rear lights and plate does anybody have any info on how well I can expect to be covered?
I actually have had the Ultralyte try to get me from rear a few times, twice the jammer was on for a long time and the other 3 or 4 times just for a bit...I assume when just for a bit they got punch through and when for a while they had a hard time....just a guess, but does this sound like what is happening?....they use these guns for photo Lidar in my home town and my goal is to f*&k em up (JFG) everytime.....one last question does the Zr4 heads protect against ultrlyte any better that zr3?
focalcivic
08-22-2008, 06:21 PM
I am brand new to the forum and have only just retaken ownership of my bank account from the greedy ass city photo enforcement hounds.....
I just installed my ZR3's on my Solstice GXP - the only place to do so was behind the honeycomb grill. I called Escort and the tech said that is the place for them and it will work fine...If anyone has seen the front end of a Pontiac Solstice GXP please let me know your thoughts....I have also just purchased VEIL it is on its way...When I put that stuff on my front lights, fogs and indicators and on rear lights and plate does anybody have any info on how well I can expect to be covered?
I actually have had the Ultralyte try to get me from rear a few times, twice the jammer was on for a long time and the other 3 or 4 times just for a bit...I assume when just for a bit they got punch through and when for a while they had a hard time....just a guess, but does this sound like what is happening?....they use these guns for photo Lidar in my home town and my goal is to f*&k em up (JFG) everytime.....one last question does the Zr4 heads protect against ultrlyte any better that zr3?
Im sorry to tell you the ZR3 doesn't offer much protection, and behind a grill you might as well not have a jammer. The Zr4 is better, but even so you will need the heads exposed and level.
Look at these recent results Radar Detector Tests and Reviews by Guys of LIDAR (http://www.guysoflidar.com)
Sosticegxp
08-22-2008, 11:18 PM
OK I have now got the heads flush with the grill I.E . exposed out front. Coupled with veil this should offer pretty good protection right??....As for the GOL test the ZR3 performed better against the ultralyte 2020 than the ZR4, unless Im reading it wrong...
We don't have the stealth gun in use here so no need for ZR3 here
anyone else have comments on my setup...from the vids I've seen veil with the ZR3 has performed pretty well for jamming......plus my Solstice has a very small rounded front end
Arashi666
08-23-2008, 12:14 AM
well for starters they were tested on different cars, and I dare say the HHR for the ZR4 had it alot worse. . . so im just gonna dismiss it as that
ZR3 vs LA stealth doesnt exist, according to GOL it didnt even register, whereas the ZR4 jammed it consistently
TSi+WRX
08-23-2008, 04:25 PM
^ I can also confirm that the Laser Atlanta "Stealth Mode" will *not* trigger the ZR3.
It'll trigger the 9500i (and other new Escort products, including the ZR4).
And no, if your ZR3 is plugged into a 9500i (or other), it still won't detect the ZR3. The ZR3's just not physically capable of doing it.
----
I just installed my ZR3's on my Solstice GXP - the only place to do so was behind the honeycomb grill. I called Escort and the tech said that is the place for them and it will work fine
Escort's staff have, and I'm really sorry to say this, been rather ignorant about their laser jammers.
As the others here have said, don't trust their word on this, at all.
Do *not* mount behind any such kind of obstruction. Even for the best jammer (of which the ZR3 is decidedly, unfortunately, not) this setup presents a severe handicap (look at results from PMoth's previous LI setup, versus the setup on hockey2005's similar Mitsubishi Evo).
With the ZR3, if you did this, you might as well not have any jammer at all.
I'm glad you decided to relocate your heads.
I have also just purchased VEIL it is on its way...When I put that stuff on my front lights, fogs and indicators and on rear lights and plate does anybody have any info on how well I can expect to be covered?
You should be OK, but I still would not expect JTG/JFG performance.
You should have plenty of time to slow-to-reasonable/slow-to-PSL, particularly if your locals do not engage at less than 800 ft., but above that? It's still a gamble.
I actually have had the Ultralyte try to get me from rear a few times, twice the jammer was on for a long time and the other 3 or 4 times just for a bit...I assume when just for a bit they got punch through and when for a while they had a hard time....just a guess, but does this sound like what is happening?....
It's an impossible call to make.
The problem with the ZR3 is that, as with all Escort products (even the ZR4), it does not offer "real-time" laser detection. Even after the incoming threat has ceased, the detector will *still* continue to report/warn for some time.
This, coupled with the extreme LIDAR sensitivity of the ZR3/4, makes it nearly impossible to tell if the alert you're hearing is due to an actual "now" attack, its residual, or even scatter.
they use these guns for photo Lidar in my home town and my goal is to f*&k em up (JFG) everytime.....
I'm very, very pragmatic - some would say pessimistic - regarding rear-enforcement scenarios.
If you want "true JFG," you reallyl need to invest in the top-of-the-line..... I'd really recommend the LI, and couple that with passive measures, too (i.e. VEIL and LaserShield), given your area's LIDAR-aided photo-enforcement.
Anything else, I think, is just giving you a sense of false-security, which, I honestly believe, is worse than simply having no protection at all.
----
solstice, be realistic in your expectations.
Yes, with the LI and passive measures, it's more than likely that you'll be a "true JTFG" vehicle.
However, to gamble this on the known photo-LIDAR traps in your area? That's just insane.
The cards are always stacked against us - all it takes is just one PT, for whatever random reason (may it be just the alignment of Uranus and the moon), to ruin your day.
Yes, with such a countermeasures compliment, it would be very unlikely for you to see such problems, but do you really want to gamble on that, each and every time you roll through the photo-LIDAR?
The primary use of these devices and measures is to help us get to reasonable/PSL, to open a window of time during which we can take remedial action. It's not to guaranty some kind of sci-fi "cloaking."
To play such odds, in my view, is simply foolish, and as a fellow motorist, I implore you to re-think your end-goal, before you make the considerable investment into these tools, and then discover the same piece of mail served to you.
[ At the same time, we honestly have no data, as a community, as to the effectiveness of these devices versus photo-LIDAR; as a matter of fact, there is even a case brought to-light to us, by interceptor.tw, to show that it is still possible for a LIDAR *mistake* to cause a countermeasures-equipped vehicle/owner to receive such an automated ticket. ]
And if these photo-LIDAR units in your area are manned - your efforts will likely bring you even more trouble, in the form of increased enforcement scrutiny. And believe me, you wouldn't be the first - there are many members here who have been "marked" by their local enforcers..... Look at what happened to erickonphoenix.
Finally, if the photo-LIDARs are stationary, simply get yourself a GPS-based solution (9500ix, ci, Cheetah GPS-Mirror, upload databases into your onboard GPS, carputer/laptop, or even your cell phone), and just take the extra few seconds a day to not speed through them.
Sosticegxp
08-23-2008, 04:48 PM
OOPS I meant to write no ZR4's required because they don't use LA Stealth here....curious, what happened to the guy you mentioned regarding increased enforcement scrutiny? I assume they didn't like the fact that he had jammers etc. and harrassed him some....
Thanks for all the info, although I was hoping for better info....I just really wanted to find out there was protection available if I accidentally drive 9,10,11 KMH over the limit past the overzealous lidar operators in our local photo enforcement vehicles, sounds like no such monster exists even though I was told by local dealer it did!!!! :mad:
TSi+WRX
08-23-2008, 07:15 PM
OOPS I meant to write no ZR4's required because they don't use LA Stealth here....
It's all right. This stuff can be quite confusing, to newcomers. :)
curious, what happened to the guy you mentioned regarding increased enforcement scrutiny? I assume they didn't like the fact that he had jammers etc. and harrassed him some....
Not really that bad, but they made it known to him that his exploits weren't un-noticed.
Thanks for all the info, although I was hoping for better info....I just really wanted to find out there was protection available if I accidentally drive 9,10,11 KMH over the limit past the overzealous lidar operators in our local photo enforcement vehicles, sounds like no such monster exists even though I was told by local dealer it did!!!! :mad:
Oh no, don't get me wrong - that 300-lbs. gorilla does exist. That beast can well be called the LI.
It's proven, time and again, that it can effect "true JTFG" - run after test run.
Your dealer may not have advised you properly, in selecting a "true JTFG" device - the ZR3/4 certainly is not that, not even, consistently, with the help of passive protective measures - but he is correct in thinking that, technologically speaking, such a device does exist.
See, the problem here is not one of the device not being available. It's been, like I said, proven time and again that the LI can be - and is - that beast.
The problem, instead, is one of scenario, and of odds.
You say that you want to jam your locals, each and every time, to-gun.
See, the problem is that can never be fully guaranteed.
Is it possible? Technically and technologically speaking, yes. Look at those various test-runs.
But let's step back to the real-world.
Can you guaranty, every time, that your jammer won't have just an ever so brief and ever so unlikely malfunction? Can you guaranty, each and every time, that there are not going to be unpredictable imperfections in the roadway that may cause your jammer heads go go *severely* out-of-alignment with the LIDAR threat? Can you guaranty, each and every time, that other potential environmental factors aren't going to come into play - i.e. sun-glare/interference? Can you say, without a shadow of doubt, that you're disciplined enough to check your heads' alignment and level, every time you get back into the car, and that you'll clean the heads then, too?
Can you guaranty that each and every one of your real-world runs will, to no great extent, exceed the parameters set under controlled testing?
That's the problem.
Day in, day out, you'll play the odds - in a game where, when it comes down to it, it just takes that one ever-so-unlikely PT to totally ruin your day, and your driving record.
Please understand that this is not the way to view jammer usage - it's not some kind of magical invisibility/invincibility cloak, against LIDAR. Same with the excellent passive countermeasures that we have available today, like VEIL G4.
Yes, it may seem like it from all the testing done, but that's a truly too-idealistic and rather foolhearty way to go about interpreting the data. ;)
Instead, see these devices as tools to buy you the time/distance that you need to get back down to either a "reasonable" speed (where a manned speed-detection/enforcement setup won't "light you up" and give you a citation) or to-PSL (i.e. for an automated/manned photo-LIDAR encounter) - then shut them off so that the enforcer can effect the necessary reading, and they'll be left scratching their heads, and you'll be home free. :)
Use these jammers for the tools that they are, for the purposes that they're intended.
With your setup, if your locals are using devices for which the ZR3 has tested decently against, given your vehicle and your desire to also include passive countermeasures, as long as they don't engage you from totally unfavorable distances, you should do decently well. On a rear shot, though, with your current setup, I remain *very* skeptical that it'll do you much good (the ZR3/4, although testing decently well for centralized "plate shots" from the rear - where the rear head is mounted - as soon as the shot pans away from the head, PT is much more readily elicited)......
Sosticegxp
08-24-2008, 11:15 AM
Where do I pick up an LI....can I order online, which is best place to order from?
AirMoore
08-24-2008, 02:32 PM
/\ /\ /\ /\
If you want the LI's, PM the member of this board: C55 (His 'real' name: Cliff)
Sosticegxp
08-24-2008, 04:33 PM
Thanks. I did PM Cliff but then found his website and have just ordered the unit. I couldn't get the rear protection though , they were sold out:eek:....
I hope when he gets them in he will give me a deal to get them at the proce I would have paid today if he had them:)
I am really looking forward to getting the units....any comments on still usinf my Zr3's as a backup at same time as LI's??
TSi+WRX
08-24-2008, 04:40 PM
I am really looking forward to getting the units....any comments on still usinf my Zr3's as a backup at same time as LI's??
I can't currently recommend it......
http://www.radardetector.net/forums/laser-jammers/37856-preliminary-testing-indicates.html
Until more evidence has been gathered of the ZR3, specifically, I can only recommend that you run the ZR3 in "Receive Only" mode, if used in-conjunction with the LI.
ve52001
08-25-2008, 04:35 PM
Dont know about the Zr4, but my Zr3 seems to do well with all three sencers on the front of my Silverado.
TSi+WRX
08-25-2008, 06:08 PM
^ Of the ZR3, that is a definite known, and is both quantitatively proven as well as accepted practice. :)
06blackgto
08-26-2008, 08:33 AM
I have all 3 mounted up front. but I haven't been hit by laser since I did it. infact I haven't been hit by laser in about 2 months... Idk what the hell is going on, but Im itching for a laser attack...:D
focalcivic
08-27-2008, 10:26 AM
I have all 3 mounted up front. but I haven't been hit by laser since I did it. infact I haven't been hit by laser in about 2 months... Idk what the hell is going on, but Im itching for a laser attack...:D
I have heard cops never target ZR4 owners who put all 3 heads up front :D
06blackgto
08-27-2008, 09:22 PM
I have heard cops never target ZR4 owners who put all 3 heads up front :D
Oh hell yeah!!!:rock: I thought something was up....:Banane42:
Sosticegxp
09-07-2008, 10:07 AM
Well, I have installed my VEIL and my new front LI heads. I have also installed all 3, ZR3 heads in the rear (until I can get the rear LI's) to help jam the LTI 2020 photo laser they use around here....hopefully this setup helps to provide a fighting chance against these asses!!!
Oh yeah, I also blacked out my rear tails and put two small circles for the red light to shine through (used the circumfrence of the VEIL jar for stencil of circles (pretty cheeky huh!!) I also didn't forget to leave two 1.5 inch sized holes for the side reflectors, all treated with veil too mind you........I also blacked out the extremely large area of the headlights on the solstice and just left an opening in the front....treated with VEIL also....It actually looks quite sharp because it ties into the black convertible top nicely...I'll take some pics and post them for you guys!! I am quite pleased with my stealthing efforts so once I get the pics here please let me know what you think and how you might improve upon it....
Thanks to everyone for your help!! :)
HOW the heck do I add pics to these posts??
Go to this link to see my video
YouTube - Stealth Pontiac Solstice (http://www.youtube.com/watch?v=e8o4cLbOnVg)
focalcivic
09-07-2008, 01:00 PM
Well, I have installed my VEIL and my new front LI heads. I have also installed all 3, ZR3 heads in the rear (until I can get the rear LI's) to help jam the LTI 2020 photo laser they use around here....hopefully this setup helps to provide a fighting chance against these asses!!!
Oh yeah, I also blacked out my rear tails and put two small circles for the red light to shine through (used the circumfrence of the VEIL jar for stencil of circles (pretty cheeky huh!!) I also didn't forget to leave two 1.5 inch sized holes for the side reflectors, all treated with veil too mind you........I also blacked out the extremely large area of the headlights on the solstice and just left an opening in the front....treated with VEIL also....It actually looks quite sharp because it ties into the black convertible top nicely...I'll take some pics and post them for you guys!! I am quite pleased with my stealthing efforts so once I get the pics here please let me know what you think and how you might improve upon it....
Thanks to everyone for your help!! :)
HOW the heck do I add pics to these posts??
Go to this link to see my video
YouTube - Solstice "stealthed" against lidar (http://www.youtube.com/watch?v=ArUepuQr14s)
I was curious what did you use to black out the lights? Also, is that legal in you country?
Sosticegxp
09-07-2008, 01:20 PM
I sanded the lenses with 2000grit and sprayed multiple coats of a newer paint called Krylon Fusion For Plastic.
The law in Alberta, Canada simply states that taillights must be red and visible from 150meters away (they are without any trouble) and headlights must be made of clear material, which they are......and must not have anything applied that changes the white light entering or existing to another colour......
I have found that Veil does leave a slight blue hue on the lens but the light is very clearly still white when it projects onto the road.
As for the blackout on the headlights it is only on the large piece of plastic on top that is just for visual effect no light originated from that area prior to blackout so there is no law pertaining to that.
I have had alot of coips drive behind, infront, beside etc... since I did this and none have pulled me over.......I think I am covered...the only thing that concerns me a bit is the VEIL on my plate because it has darkened it some......I will see...
What do you think of the look and install? any suggestions?
TSi+WRX
09-07-2008, 01:39 PM
Dude, that's HARD-CORE!!!! :eek::)
I really like the look, I feel that it really helps the Solstice, which I've always found very nice - but a little too "cute" looking - live up to its GXP badging as a little speedster. And you're also very on-cue about it helping tie-in the "black" of the ragtop.
[ BTW, I noticed what you had in the next space over in your garage, nice! :cool: ]
It looks like you really took everything into consideration, including your area's laws and enforcement attitudes. That's superb!
:cool::D:)
-----
I don't have the ability to do the video, frame-by-frame, but you might want to re-check it, to see if there's anywhere along any of its length that revealed your plate/ID details.......
Sosticegxp
09-07-2008, 01:58 PM
Dude, that's HARD-CORE!!!! :eek::)
I really like the look, I feel that it really helps the Solstice, which I've always found very nice - but a little too "cute" looking - live up to its GXP badging as a little speedster. And you're also very on-cue about it helping tie-in the "black" of the ragtop.
[ BTW, I noticed what you had in the next space over in your garage, nice! :cool: ]
It looks like you really took everything into consideration, including your area's laws and enforcement attitudes. That's superb!
:cool::D:)
-----
I don't have the ability to do the video, frame-by-frame, but you might want to re-check it, to see if there's anywhere along any of its length that revealed your plate/ID details.......
Thanks!! Glad you like!! Yes the Dodge Daytona is my other baby...she's an 06 GOMANGO version #192 of 200 made......she has less than 5000km's and has never been in rain, snow, or washed......just pressure rinsed!! She doesn't get out much so when I take her out I just put the 8500X50 in there.
swarga
09-07-2008, 02:08 PM
I have heard cops never target ZR4 owners who put all 3 heads up front :D
That's not quite true. Cops won't target them from the front, but will instead wait until the car passes by and then target the (unprotected) rear. :laugh:
Radar Roy
10-23-2008, 09:28 PM
I was first alerted by an Escort engineer on the problem(s) associated with putting the rear laser jammer head up front with the two front jammer heads.
They related that the rear head is timed differently then the smaller front heads and by having both transmitting at different rates would interfere with each other reducing the systems performance.
We did perform this test during after the install of the ZR4 on my wife's Toyota and when all three heads were used, there was a significant increase in punch through with the Stalker gun.
Okay I have the zr4 I have g4 hopefully on it's way. Im just wondering if it really hurts to put the back shifter on the front plate, and run all three shifters?
I really don't understand how it would hurt? but I thought I would get someone else's personal opinion if they have done it or not?
I never see the leo's in ks or mo. hit from behind w/laser. and I think the rear shifter would do me more good on the front.
any real world experiences?
Radar Roy
10-23-2008, 09:33 PM
If four heads worked better I would be the 1st person to beat the drum, this would mean more ZR4 sales.
But I didn't see any difference at all!
Perhaps with four heads the voltage is reduced?
I just know from my experience it didn't help, so save your $$$$
^ That's strange......
Why would a 4-head setup - adding two more FRONT heads, either split or independently controlled via a separate c-box - of the ZR4 *not* return with better results? Wouldn't it be akin to the comparison between a 2-head Blinder, versus a 4-head?
And this also doesn't seem to make sense, from what we know of the function of the single rear-head -> with Cbr and ELVATO's test, using the Stalker, as long as the Stalker's beam is within enough proximity of the jammer head ( "shooting at the head," in our "community speak" ;) ), it'll provide even rear-of-vehicle coverage.
So one would imagine that with more heads, it's harder for the LIDAR beam to not "find" a "target head" within sufficient proximity, right?
So, then, why would a 4-head ZR3, with two sets of front heads being dedicated towards that aspect, with no worries of temporal-mismatch/pulsetrain lag, *not* offer better protection than with 2 heads?
I don't get it. :confused:
----
And FWIW, ahmadr and Z1, I agree with your doubts/thoughts.
I just would like to see some independent proof to either confirm or deny what's been reported to Roy and The VEIL Guy, that's all.
06blackgto
10-23-2008, 10:38 PM
If four heads worked better I would be the 1st person to beat the drum, this would mean more ZR4 sales.
But I didn't see any difference at all!
Perhaps with four heads the voltage is reduced?
I just know from my experience it didn't help, so save your $$$$
I hear and understand what your saying Roy, I still have the 3 heads on the front, and have been hit w/laser 2 times now here in kc. I believe it was either a stalker or pl3 from the way they looked. seemed sucessful so far. they hit me for 10-15 sec. straight until I double tapped the mute to shut off the shifters, then after a sec or two, they panned away. I was using my v1 also. "that's how I know they panned away". I still would love to get a 2nd. opinion w/diff. guns. Hopefully someone on here will be testing soon enough. I would ask a officer around here, but I don't think that would be very smart...:D
TSi+WRX
10-24-2008, 08:01 AM
^ Good stuff, 06gto. :)
I think that the question that scenario begs (aside from the fact that it is, as you well pointed out, non-quantitative and non-definitive), whether or not such a setup as you have may confer some advantages, at some ranges and/or versus specific enforcement hardware, while not doing so in others.
----
If four heads worked better I would be the 1st person to beat the drum, this would mean more ZR4 sales.
:D Honestly spoken. :) Can't ask for more than that! :)
But I didn't see any difference at all!
Perhaps with four heads the voltage is reduced?
I just know from my experience it didn't help, so save your $$$$
That's a most interesting thought - indeed, is something "up," electronically, with that setup?
But then that begs the question of what would happen if power for each distinct setup (i.e. each 2 heads and each control-box) were sourced independently from the vehicle's main power supply.... ?
Also, it would, at the same time, beg another question - is there something precise, within the jamming algorithm, that makes it so that more heads, no matter how it's sourced, just doesn't help?