PDA

View Full Version : Thinking about the Zr4



focalcivic
08-07-2008, 09:28 AM
I posted this in the general section to get some feedback. They were discussing the 3 heads up front for the zr4 and I thought of this:

Think of it this way the rear head might be timed different than the front heads, I wonder in essence it might cause a cross talk issue with itself?

MEM-TEK
08-07-2008, 10:39 AM
I have been thinking this too. My examination of the ZR4 rear head design suggests that it emits a much broader vertical cone compared to the front heads. My thinking is that, if the rear head is mounted up front, then its downward emissions could easily reflect back from the pavement close to in front of the vehicle and then could interfere with the jamming operation of the other two front heads. I've decided to buy the ZR4 tested at SML from Escort so that I can conduct some tests in a few weeks with rsatmans and steagall1000. My plan is to temporarily mount the ZR4 front heads under the flat front area of my car's front bumper, and to temporarily mount the ZR4's rear head to my front bumper's license plate area.

Then my testing idea is as follows:

-- Plug the ZR4's front bumper mounted rear head plus my 9500ci's current installed and high mounted front heads into the ZR4 and test this particular setup.

-- Plug the ZR4's front bumper mounted rear head plus the ZR4's low mounted front heads into the ZR4 and test this particular setup.

-- Install a small sheet metal shield underneath the ZR4's front bumper mounted rear head, in order to prevent its emissions from striking the ground in front of my vehicle and possibly causing feedback into the front heads, and then test this head in conjunction with the 9500ci high mounted front heads and then with the ZR4's low mounted front heads.

Steagall1000 and I have also cooked up some other neat ideas for testing as well -- stuff that is "outside the envelope" which hopefully will be of benefit for owners of any LED based laser jammer product.

Ovencleaner
08-07-2008, 10:56 AM
Errrr........ is Steagal a Blinder dealer anymore?

TSi+WRX
08-07-2008, 11:53 AM
Cool beans, MEM-TEK. Keep us informed of what you find. :)

06blackgto
08-07-2008, 02:33 PM
Yeah I can't wait, since I just mounted my rear zr4 head on my front plate..:D

I did mount it at the top of the plate.... hopefully that will help with it not bouncing off the ground.

TSi+WRX
08-08-2008, 08:24 AM
I ...so that I can conduct some tests in a few weeks with rsatmans and steagall1000.

I know that you're, yourself, not so sure of stegall any more, MEM-TEK, but based on his latest stunt, I'd say to stay as far away from him as possible.....

http://www.radardetector.net/forums/guys-lidar-gol/37413-gol-2008-results-leaked.html

I know you're on that thread, and you've expressed your own doubts there, but I just thought that I'd cross the post to this thread as well, in order to preserve your good name. :)

MEM-TEK
08-08-2008, 09:04 AM
Yeah, I guess rsatmans and I will get together. The only laser gun we really need to rent is the Stalker since it is the hardest to jam. Thus any tweaks or mods should stand out pretty quickly if they make matters better or worse.

Ovencleaner
08-08-2008, 09:08 AM
Look at the GOL 08 results....

Do you still want a ZR4?

There are cheaper, much better performing options out there, and one is even upgradeable (Laser Mask)

Throw the ZR4 in the garbage can.... I honestly do not believe you can justify buying one for the price.

MEM-TEK
08-08-2008, 11:49 AM
Look at the GOL 08 results....

Do you still want a ZR4?

There are cheaper, much better performing options out there, and one is even upgradeable (Laser Mask)

Throw the ZR4 in the garbage can.... I honestly do not believe you can justify buying one for the price.

The way I see it, the metallic silver Chevy HHR was one of the worst case scenario types of vehicle to use as a test vehicle. The HHR had silver metallic paint which reflects IR extremely well, fog lights, a front chrome grille with rounded vanes in which you can see the reflected horizon, and very flat vertical portions of the front bumper. I also note that the HHR's chrome grille and bumper is "creased" about a vertical centerline such that half the grille and front bumper present nearly straight-on surfaces if the laser guns were located somewhat off to the side of the HHR's path down the test course. In other words, unusually strong laser returns were produced by this particular test vehicle compared to most other types of compact and mid sized vehicles.

My car, a metallic gold colored Hyundai with the front ZR4 shifters mounted too high, performed far better at the Atlanta Jammerfest 2008 compared to the GOL results. And the ZR4 equipped Mercedes 560SL at the Atlanta Jammerfest 2008 performed way better than my car due to its more optimal jammer head locations. Also note some of the wildly varying numbers between runs #1 and #2 in the GOL tests. Obviously the Chevy HHR front surfaces are capable of momentarily producing some very strong laser reflections.

I love the way the ZR4 integrates with most of Bel's and Escort's radar detectors. Plus, after examining the internal design of its front heads, I have a couple of neat ideas which I want to test that should significantly improve its performance. I am going ahead with buying the ZR4 system which was tested at SML so that I will have both the original heads of the 9500ci system and the modified heads from the ZR4 system to test side-by-side. I have also moved my 9500ci's front jammer heads a bit lower to provide better coverage for my car's relatively flat front bumper. I am confident that with my modified setup that my 9500ci/ZR4 will now jam even the Stalker laser gun down to within 300 feet or better.

:)

Fastgt2003
08-08-2008, 12:00 PM
Look at the GOL 08 results....

Do you still want a ZR4?

There are cheaper, much better performing options out there, and one is even upgradeable (Laser Mask)

Throw the ZR4 in the garbage can.... I honestly do not believe you can justify buying one for the price.

why do u need 4 heads? then upfront if ur so happy with ur jammer's ????:p

that's right to get that crap to work Maybe it's just me I wouldn't like 4 freakin head's on my car I have two that work pretty good

Ovencleaner
08-08-2008, 03:38 PM
why do u need 4 heads? then upfront if ur so happy with ur jammer's ????:p

that's right to get that crap to work Maybe it's just me I wouldn't like 4 freakin head's on my car I have two that work pretty good

4 heads for less than $400...

You cant argue with that, now can you :D

For the record, I would be fine with 2 up front.

My car has base readings with a PL3 at 1000 feet... that is half the LIDAR signature of the GOL 08 car.

I just happen to like overkill... :cool:

Die LIDAR die! :devil:

happya$$
08-08-2008, 09:01 PM
IMO the BLinder J15 M25 mounted on a car with Veil G4 is a KICK A$$ combo that I would feel comfortable with ANY day of the week

IMO the Blinder J15 M45 mounted on an SUV with Veil G4 is a KICK A$$ combo that I would feel comfortable with ANY day of the week

Hats off to the Blinder team for being able to create a respectable LED jammer at an affordable price. Hats off to the Veil team for being able to create an awesome PASSIVE countermeasure product!

BlinderGuy
08-09-2008, 05:30 AM
why do u need 4 heads? then upfront if ur so happy with ur jammer's ????:p

that's right to get that crap to work Maybe it's just me I wouldn't like 4 freakin head's on my car I have two that work pretty good

He doesn't need the 4 head LaserMask..The 2 head they used in GoL test still out performed the Zr4..So 4 heads will just be better results.

Laser Nuke
08-09-2008, 08:35 AM
4 heads for less than $400...
Die LIDAR die! :devil:


Where, where? I'm soooo confused now. I want at least one on the back, so LI is out of my budget (unless I can find a deal on a 3 head set up), thinking about the radarbuster M45 deal w/ Veil and plate covers (though I only need for the back.):hmmmm2:

Fastgt2003
08-09-2008, 11:53 AM
4 heads for less than $400...

You cant argue with that, now can you :D

For the record, I would be fine with 2 up front.

My car has base readings with a PL3 at 1000 feet... that is half the LIDAR signature of the GOL 08 car.

I just happen to like overkill... :cool:

Die LIDAR die! :devil:

you can't jam a pro laser 3 and your calling zr4's crap? my zr3's jammed that to the gun without any punches

so yup have 4 heads to do the job of what cpuild be done with 2 :p

BlinderGuy
08-09-2008, 06:20 PM
you can't jam a pro laser 3 and your calling zr4's crap? my zr3's jammed that to the gun without any punches

so yup have 4 heads to do the job of what cpuild be done with 2 :p

If I'm not mistaken all the test at GoL test where done with 2 heads. There is a big difference between the 2 head LaserMask performance and the Zr4. Also from what I have read Ovencleaner did not say anywhere that he could not JTG the Prolaser3. The only thing he even mentioned was his baseline is 1000ft against the Prolaser3. That means 1000ft without a jammer.

hockey005
08-09-2008, 07:55 PM
yea so ur only chance would be gettin shot like at 1500 feet :D

Z1NONLY
08-09-2008, 08:01 PM
yea so ur only chance would be gettin shot like at 1500 feet :D

A lot of this depends on the target vehicle.

My ZR3 can JTG against the Stalker on CM shots. (On my 350z and Magnum)

Fastgt2003
08-09-2008, 09:05 PM
yea so ur only chance would be gettin shot like at 1500 feet :D

and it's also very easy to shoot car's at 2k ft if you ever shot a pro laser 3 it's easy to shoot them from that far