PDA

View Full Version : question about my zr4.



06blackgto
09-05-2008, 04:01 PM
Okay I have the zr4's on my car. I can set them off w/a t.v. remote and I can also set off my v1. but when I look thru my digital camera video screen I can't see them light up "ir reflection"... I was pretty sure when I use to do this with my original blinder mp06's or something like that... the original old school blinders. I could see them light up in my viewfinder, but that was with a camcorder. but I can't seem to see my zr4's light up thru my dig. cam. veiwfinder. ..

should I be able to see them light up?
just want to make sure Im also jamming not just receiving....

and they come factory in jamming mode right?

erickonphoenix
09-05-2008, 04:05 PM
My ZR3s don't show up on my IR camera either.

TSi+WRX
09-05-2008, 04:23 PM
^ My ZR3 (as well as LI and LPP) all "show" on either a standard digicam or with "NightMode" assisted cameraphone.

Hope this helps...... :o

erickonphoenix
09-05-2008, 04:31 PM
^ My ZR3 (as well as LI and LPP) all "show" on either a standard digicam or with "NightMode" assisted cameraphone.

Hope this helps...... :o

Is there any special set up your doing or do I have to drive way out in the country and shoot in a cow pasture again?

TSi+WRX
09-05-2008, 06:10 PM
^ Yeah, I go way, way out in the country ("where the rabbits don't poop," as the Chinese proverb goes), spin around seven times, and then lie prostrate, naked.

:p

Nope.

It's easier to see when it's dark out, but hell, my house is in the suburbs, and it's always rather bright (neighbor's yard light, my garage's outside light - which is automatic, and I can't shut it off). Just dark-enough should do.

During the daytime, I've even just closed the garage door (here, keep in mind that one entire "slat" of the door is composed of windows), and cup my hands over the heads.....

AirMoore
09-05-2008, 09:08 PM
Try your camera-phone 'video' function GTO.


My Blinders are easy to see via camera-phone when they fire, but the key is you have to be level and directly in-front of them (About 1 foot away, at the height of the unit, facing right at it), and they look like... hmmm little LED's. :p


I would assume logically that you should be able to see yours this way as well, make sure you kneel down so you are at 'head level' when videotaping with a camera phone.

MEM-TEK
09-05-2008, 10:59 PM
Years ago Radio Shack used to sell a tiny card which flouresced in red light when you shined an IR remote controller beam onto it. There has got to be some electronic company out there who still makes the darned things!

06blackgto
09-05-2008, 11:32 PM
Try your camera-phone 'video' function GTO.


My Blinders are easy to see via camera-phone when they fire, but the key is you have to be level and directly in-front of them (About 1 foot away, at the height of the unit, facing right at it), and they look like... hmmm little LED's. :p


I would assume logically that you should be able to see yours this way as well, make sure you kneel down so you are at 'head level' when videotaping with a camera phone.



I'll try my cameraphone... I was able to see little red flickers. but I'll try it when it's darker....:)

YouCanJam
09-06-2008, 02:19 AM
Is there any special set up your doing or do I have to drive way out in the country and shoot in a cow pasture again?

:lol::lol::lol: I saw that vid! wtf he's actually in a field?! weird how that "GTO" glowed tho...

Cool news about the camera vid...just tried it out in the garage, works great!

Volume seems to make the audio alarm. DirectTV HD remote. Seems it goes from Sat to TV real quick, which makes a 'pulse' therefore it alarms. But most other buttons are constant SatTv thus constant on LI and no audio alert....

gotta be right down on it to see it real bright on camera...

06blackgto
09-06-2008, 11:35 AM
wow, it did work better thru my camera phone. I can get all 3 heads to go off at the same time. I have the rear head on the front, I know they say it works less, because the timing is off from the rear head to the front, but Im not so sure about it, they go off exactly at the same time....:)

Arashi666
09-06-2008, 04:15 PM
well it seems that way just because your head doesnt work that fast, not fast enough to see the difference at those speeds, and im talking the speed of light, and thats damned fast

Retaliation
09-06-2008, 04:43 PM
I think its not that the heads won't go off at the same time. Its that the rear ZR4 head is not in sync with 2 front heads. Therefore, it may actually interfere with the front heads when they are jamming. As far as I know, nobody has tested this yet.

06blackgto
09-06-2008, 09:15 PM
No the heads do fire at the same time. I played it back thru my camcorder on my phone. and all 3 heads fire exactly at the same time. if there not sync'd then they got me fooled. because there firing together.

Retaliation
09-07-2008, 12:47 AM
I mean the jamming pulses are not synced to work with each other. The rear head either has different algorythms than the front heads or the 3 heads are just not synchronized to work together. I believe this was stated by Roy when the ZR4s were first released.

Arashi666
09-07-2008, 05:18 AM
I get what youre saying and all, but it may look like theyre all firing together, but at 100-some-odd pulses per second, your brain cant register a small difference if even one pulse is off

and yeah I agree with retaliation, and I just explained why, its all starting to fire, but it doesnt pulse at the EXACT SAME rate, and that can cause confusion

06blackgto
09-07-2008, 07:58 AM
I see what you guys and roy is saying. however for some strange reason I believe that it will help. it helped the zr3's. when it was ran like that. I just wished I knew someone w/ a lasegun around kc to test it out. hopefully someone will be able to test it out on here sometime.

TSi+WRX
09-07-2008, 04:31 PM
^ The thing is, with the ZR3, it was never said that using the rear head in a frontal application, in conjunction with the other heads, would be a potential cause of performance degradation.

With the ZR4, we've got this warning from the likes of Roy himself, who has in-roads with Escort's inner sanctum.

The truth of the matter is that what we can "see" simply doesn't prove much - can you say that you can tell the difference, visually, between 20 pulses per second, and 21? or even 30? We could even somehow time the pulses, and it still won't prove anything...for what if the problem isn't caused by pulserate, precisely - but rather, is concerned with say, the peak output of one not matching the other? Too many potential confounding factors.

At the same time, to take the logical step and to examine the issue from the other side of the equation, we've seen from past history that "Escort's word" about something technical like this is less than totally trustworthy, too. :rolleyes::(:mad:

What needs to be done are some controlled runs against a number of different LIDAR guns. That's the only way to be sure.

06blackgto
09-07-2008, 04:58 PM
What needs to be done are some controlled runs against a number of different LIDAR guns. That's the only way to be sure.



totally agree....:)


I guess I'll be the guinea pig for now... just to have to find a buddy who's buddies w/ a leo w/a lasergun....:)

MEM-TEK
09-07-2008, 07:01 PM
Atlanta Jammerfest hopefully will reconvene fairly soon for some more testing. One of the things which I will be testing is my ZR4 with all three heads up front. One test will just be with all three heads up front, but another test will be with a small metal or plastic shield installed on the bottom side of the rear head since the rear head emits a much taller vertical cone. My theory, to be put to the test, is that if I block the rear head emissions from striking the ground close to in front of the car, then hopefully there will be no feedback issues due to scatter back into the pair of front heads.

TSi+WRX
09-08-2008, 07:33 AM
^ All good stuff! :D

swarga
09-09-2008, 11:08 PM
I get what youre saying and all, but it may look like theyre all firing together, but at 100-some-odd pulses per second, your brain cant register a small difference if even one pulse is off

As a scientist, you must also consider the possibility that none of the jammer heads are synchronized with any of the others. Of course, they would appear to be synchronized because they are all responding to the same trigger stimulus (i.e. they can all "see" the same incoming IR light), and thus they might independently begin to send out pulses at the same time.

A nice experiment would be to put some black electrical tape over the sensor on one of the front jammer heads, and then shine the IR light on the other head (the one that can still "see"). Do both front jammer heads begin to flash in unison when the functional one is triggered? Or does the "blind" one remain dark?

Signed,

Curious. ;)

TSi+WRX
09-10-2008, 08:20 AM
^ Now that's a well thought out experiment! :eek::D:)

I'm curious, too!

Subie_07
09-11-2008, 04:18 PM
The Zr3 front heads operated as such... No matter if the front left or right was hit... they both would fire... Me and outrun ran across this when we tested our setups.

I wish diode setups would do this... to be honest.

The rear head does not do this though... and if it did it would improve jamming capabilities...

In comparison to Blinder each head only responds to what it can see...

I assume this is why it "interferes" with the jamming capabilities.


As a scientist, you must also consider the possibility that none of the jammer heads are synchronized with any of the others. Of course, they would appear to be synchronized because they are all responding to the same trigger stimulus (i.e. they can all "see" the same incoming IR light), and thus they might independently begin to send out pulses at the same time.

A nice experiment would be to put some black electrical tape over the sensor on one of the front jammer heads, and then shine the IR light on the other head (the one that can still "see"). Do both front jammer heads begin to flash in unison when the functional one is triggered? Or does the "blind" one remain dark?

Signed,

Curious. ;)

focalcivic
09-11-2008, 07:50 PM
As a scientist, you must also consider the possibility that none of the jammer heads are synchronized with any of the others. Of course, they would appear to be synchronized because they are all responding to the same trigger stimulus (i.e. they can all "see" the same incoming IR light), and thus they might independently begin to send out pulses at the same time.

A nice experiment would be to put some black electrical tape over the sensor on one of the front jammer heads, and then shine the IR light on the other head (the one that can still "see"). Do both front jammer heads begin to flash in unison when the functional one is triggered? Or does the "blind" one remain dark?

Signed,

Curious. ;)

Sounds like an experiment for Mem

Ok, that brings up a good point, all 3 heads up front might not be benficial for the Zr4 because as other stated, if 1 front head sees the beam the other front head goes off, but theorically the rear head is not synced to fire. The only real way for the rear head up front would be if the beam was wide enough to hit the plate and one of the front heads at the same time which it is not.

Now this brings up different thinking, say for instance you get a CM plate hit with the rear head on the plate, that head fires back. Now think of this the cop pans to say the head light one of the other front heads fire, that might offer protection in that scenerio.

That would be a good test, if you tested CM and then same time pan to a headlight and with a night cam check out the firing pattern.

Does this makes sense?