View Full Version : Escort 9500ci/Laser Interceptor
Is it possible to install the radar portion of the 9500ci and not the laser shifters without causing any problems? I do not want the additional heads since I will be using a quad LI for laser defense. I realize I will be paying for something I will not use and just need to know if my plan is workable.
Zapple
10-16-2008, 02:53 PM
Yep, you can do that.
crazyVOLVOrob
10-16-2008, 03:03 PM
Yes its possible but when starting up your Escort 9500ci it will give you an error message that the laser heads are not connected
Yes its possible but when starting up your Escort 9500ci it will give you an error message that the laser heads are not connected
Will the message go away after start up or remain on continiously?
MEM-TEK
10-16-2008, 08:08 PM
Will the message go away after start up or remain on continiously?
The message goes away. You might want to consider installing at least the 9500ci's shifter heads in "receive only" mode since the 9500ci's included ZR4 shifter heads are incredibly sensitive to laser. Its quite possible that the ZR4 shifter heads might alert you to a more distant laser threat before the LI detects the laser and has to jam it. Maybe use the ZR4 mounting brackets and use double-stick 3M VHB tape (available at Radio Shack) to also conveniently attach the LI heads as well?
:)
9500ier
10-16-2008, 08:38 PM
Quads up front and ZR4s in the back - or - 2 LIs up front and 2 out back with 2 Zr4s up front?
just an idea...
The message goes away. You might want to consider installing at least the 9500ci's shifter heads in "receive only" mode since the 9500ci's included ZR4 shifter heads are incredibly sensitive to laser. Its quite possible that the ZR4 shifter heads might alert you to a more distant laser threat before the LI detects the laser and has to jam it. Maybe use the ZR4 mounting brackets and use double-stick 3M VHB tape (available at Radio Shack) to also conveniently attach the LI heads as well?
:)
I considered this but I have read posts saying the ZR4 falses on a regular basis.
MEM-TEK
10-16-2008, 09:11 PM
I considered this but I have read posts saying the ZR4 falses on a regular basis.
I've had only 3 ZR4 falses so far, but then again I live in a more rural area. If of course you find that your 9500ci's shifters false excessively then you could simply either unplug them or turn off laser detection in the 9500ci.
:)
hockey005
10-16-2008, 09:35 PM
why are u goin to dick around with zr4's if u have a quad LI? just forget the zr4's and install the LI
why are u goin to dick around with zr4's if u have a quad LI? just forget the zr4's and install the LI
That is my plan. In my initial post I was simply asking if not installing the ZR4s will cause problems with the 9500ci. I have received conflicting answers from escort and two different installers.
djrams80
10-16-2008, 10:25 PM
I have both installed on my car. I have the ZR4s turned off on my 9500ci because they false too much. However, it is nice to have a backup system ready to go just in case. None of these systems are known as being "crazy reliable".
http://img440.imageshack.us/img440/6807/imag0072aux6.jpg
http://img247.imageshack.us/img247/3125/imag0074aen5.jpg
http://img231.imageshack.us/img231/8692/imag0073arr5.jpg
TSi+WRX
10-17-2008, 08:27 AM
^ Either that (i.e. turning the ZR4s off, if you find the falsing to be too much), or you could simply tuck the ZR4 heads "inside" the vehicle some where, leaving them plugged-in to ward-off the errors, but out of the elements (and thieves' reach).
The message goes away. You might want to consider installing at least the 9500ci's shifter heads in "receive only" mode since the 9500ci's included ZR4 shifter heads are incredibly sensitive to laser. Its quite possible that the ZR4 shifter heads might alert you to a more distant laser threat before the LI detects the laser and has to jam it. Maybe use the ZR4 mounting brackets and use double-stick 3M VHB tape (available at Radio Shack) to also conveniently attach the LI heads as well?
+1.
REBinc
10-17-2008, 07:08 PM
Or just buy the STIr if you just want radar. Doesn't have quite all the same features.
focalcivic
10-17-2008, 07:49 PM
^ Either that (i.e. turning the ZR4s off, if you find the falsing to be too much), or you could simply tuck the ZR4 heads "inside" the vehicle some where, leaving them plugged-in to ward-off the errors, but out of the elements (and thieves' reach).
+1.
Allen I was thinking that same thing, you can keep them plugged in and tied up in the inside by the control box.
I am thinking he does not want to bother going through the install trouble of hooking up the heads on the outside, because you still have to mount them and run the cables inside, I can not blame him since he will have the LI anyway.
ELVATO
10-18-2008, 05:32 AM
Hmmm, I know my X50 gives a couple beeps at start up with the rear head disconnected, but it goes away after the initial message. Something like "Rear....Head....Error....X Band Off" then off it goes with the scanning + :)
But, when I disconnected the front heads during installation, it seemed the message didn't go away, at least not for the bit of time I had then disconnected, until I reconnected the front heads again.
TSi+WRX
10-18-2008, 12:51 PM
^ I think there may be some differences between the 9500ci's integration algorithm.
Your observation, ELVATO, is similar to mine, and was, if you will remember, among the reasons I sought out djrams, MEM-TEK, and tactical22 to verify the start-up error/warning issue (all of whom said that yes, after the requisite warning tones during initial start-up, the 9500ci will then revert to RADAR-only operation, and remain fully operational, in that respect), when I'd been involved in discussions of the same nature, with '09 Milan of RR.net (begin with post #49, on page 5 of the "Escort 95000ci Radar Detector and LPP Laser Jammer" thread, in the "Laser Jammer Reviews" sub-Forum).