PDA

View Full Version : Really annoyed by the solar alert



murphy
11-25-2008, 08:10 PM
Living way up here we get mostly low/horizon sun during the winter months and after 1 week of my LI install it's constantly chirping the SIA. This poses a few questions:
1) I downloaded the software program to adjust the LI but doesn't seem to install properly??
2) I don't have a straight serial cable but have an usb to serial..might it work ?
3) does the SW allow to just eliminate the SIA and/or parking prompts?
4) could anyone post the SW screen showing options..

Tks

hits 0 saves 0

repeter
11-25-2008, 08:20 PM
Living way up here we get mostly low/horizon sun during the winter months and after 1 week of my LI install it's constantly chirping the SIA. This poses a few questions:
1) I downloaded the software program to adjust the LI but doesn't seem to install properly??
2) I don't have a straight serial cable but have an usb to serial..might it work ?
3) does the SW allow to just eliminate the SIA and/or parking prompts?
4) could anyone post the SW screen showing options..

Tks

hits 0 saves 0

1) It doesn't have an installer.

2) The adapter needs to have the correct chipset. My IOGear adapter works.

3) Yes.

4) http://www.laser-interceptor.net/site/images/LI%20software.JPG
(http://www.laser-interceptor.net/site/index.php?option=com_content&task=view&id=19&Itemid=38)

murphy
11-25-2008, 08:27 PM
1) It doesn't have an installer.

2) The adapter needs to have the correct chipset. My IOGear adapter works.

3) Yes.

4) http://www.laser-interceptor.net/site/images/LI%20software.JPG
(http://www.laser-interceptor.net/site/index.php?option=com_content&task=view&id=19&Itemid=38)

Fantastic..perfect !! Could you expand on note 2) and Vista compatible ?
Thanks

murphy
11-25-2008, 09:11 PM
Nope..couldn't get in...when are we ever gonna have connector standards..like usb

Laser-InterceptorUSA
11-25-2008, 10:11 PM
Greg,

If you are unable to acquire a proper interface, I will send you a CPU with the SIA Disabled.

Here is a link to the procedure and available cables:
Problem with connecting to COMM Port (http://85.125.82.130/LaserInterceptor/smf/index.php?topic=770.30)

Please feel free to email or call me should you need further assistance.

Cliff - LI-USA

category4
11-25-2008, 10:14 PM
Nope..couldn't get in...when are we ever gonna have connector standards..like usb

Did you disconnect the sensors from the CPU? I think this has to be done also to access the CPU.

Laser-InterceptorUSA
11-25-2008, 10:19 PM
Did you disconnect the sensors from the CPU? I think this has to be done also to access the CPU.

Thanks Randy! Yes, I am assuming you have just the PC connected to the CPU as the PC will NOT handshake properly with the CPU due to the sensors taking current from the CPU.

Cliff - LI-USA

murphy
11-25-2008, 11:17 PM
Greg,

If you are unable to acquire a proper interface, I will send you a CPU with the SIA Disabled.

Here is a link to the procedure and available cables:
Problem with connecting to COMM Port (http://85.125.82.130/LaserInterceptor/smf/index.php?topic=770.30)

Please feel free to email or call me should you need further assistance.

Cliff - LI-USA

Thanks to all ..you guys are very helpful..I've packed up my gear now and no did not discoonet the heads but will try again tomorrow.Thanks for th office Cliff.let me play with it a bit more first.Good eve..

Rottman
11-26-2008, 07:49 AM
Cliff is the man, he shut off my SIA for me before he shipped mine....

murphy
11-26-2008, 12:44 PM
I picked up a Belkin USB/SERIAL ADAPTER with drivers for 98,2000,ME,XP but Vista not listed (I'm using Vista)
Loaded the drivers and it picked com 8 so I forced it to com4
No luck ? It won't connect. Now what ?

Laser-InterceptorUSA
11-26-2008, 12:54 PM
You need VISTA but you can try this:

Right Click on the Installer and tell it to run as Administrator allows VISTA to run

or

Right Click the Driver Installer and run under COMPATIBILITY MODE for the most recent compatible operating system.

Cliff - LI-USA

352-688-0708

murphy
11-26-2008, 01:21 PM
You need VISTA but you can try this:

Right Click on the Installer and tell it to run as Administrator allows VISTA to run

or

Right Click the Driver Installer and run under COMPATIBILITY MODE for the most recent compatible operating system.

Cliff - LI-USA

352-688-0708
I found a Vista driver for it and it installed to com4 but still won't connect ?
I'd just prefer parking off,SIA off...

Laser-InterceptorUSA
11-26-2008, 01:23 PM
Be sure the power is on to the CPU and the sensors are Disconnected. Click on UPLOAD Setting to the device BUTTON and then turn the power switch OFF and then ON again to retain the new settings.

To Connect to your PC:

1. First you need to connect the USB to Serial adapter.
2. Click START, Control Panel, Performance and Maintenance, System, Hardware, Device manager, scroll down and expand Ports (COM & LPT).
3. You will see the USB to Serial Bridge. If it doesnt say "COM1" then follow the next few steps.
4. Double click the USB to Serial Bridge
5. Click on tab Port Settings.
6. Click on Advanced button.
7. Click on drop down and change the COM Port Number to 1, Click OK.

Cliff - LI-USA