PDA

View Full Version : LI HP units



blue dragon
12-28-2008, 07:56 PM
Whats the point of these if the regular units perform that well. Also, when did they get so expensive:confused:

hockey005
12-28-2008, 09:37 PM
they have 2 transmitting diodes as opposed to 1 per head...and i guess if u have a huge vehicle to cover and u only want to use 2 heads?

Laser-InterceptorUSA
12-28-2008, 09:54 PM
Whats the point of these if the regular units perform that well. Also, when did they get so expensive:confused:

The LI HP LE are designed for oversize vehicles such as Motor-homes, Semis, Buses and vehicles that have similar frontal profiles, are overly reflective or for those who desire overkill. For 99% of the applications, the standard LI DUAL or QUAD are sufficient.

Cliff - LI-USA

erickonphoenix
12-28-2008, 10:39 PM
It's for Truckers.

happya$$
12-30-2008, 06:08 AM
these LI HP units are what we tested at our GOL event in AZ as a prototype

GTRstikya
01-01-2009, 11:36 PM
The LI HP LE are designed for oversize vehicles such as Motor-homes, Semis, Buses and vehicles that have similar frontal profiles, are overly reflective or for those who desire overkill. For 99% of the applications, the standard LI DUAL or QUAD are sufficient.

Cliff - LI-USA

I'm planning a system for my Nissan GT-R this spring and am debating between the 2 head LI HP, 2 head standard, or 4 head standard, to cover me front and rear.

Opinions for what a car this size needs for decent protection Cliff?

Laser-InterceptorUSA
01-02-2009, 06:20 AM
Hi GTR,

Nice ride! The standard LI QUAD will provide more than adequate front and rear protection for your application especially with the low frontal profile of the GTR. The LI HP LE would be over-kill in my opinion and the standard LI DUAL is designed only for frontal protection as is the LI HP LE DUAL.

Cliff - LI-USA

stikya
01-05-2009, 08:27 AM
Hi GTR,

Nice ride! The standard LI QUAD will provide more than adequate front and rear protection for your application especially with the low frontal profile of the GTR. The LI HP LE would be over-kill in my opinion and the standard LI DUAL is designed only for frontal protection as is the LI HP LE DUAL.

Cliff - LI-USA

Yea, I have been waiting for this car by entire life. Finally got my wife out of anethesia school and will be pulling the trigger this spring.

What finding mounting room for 2 front & rear at a reasonable distance apart is an issue; could I get by w/ the 2 head HP version: 1 front/1 rear?

Laser-InterceptorUSA
01-05-2009, 08:32 AM
Congrats to the both of you!

If you can fit one sensor, you can easily fit two, one at each location on each side. The problem with just one center mounted sensor is providing adequate protection to the headlights even with the LI HP LE which is why we recommended no less than two sensors for all applications. We will gladly sell you an LI HP LE DUAL but we cannot guarantee JTFG performance with only one sensor fore and aft!

Here are my recommendations.

http://img513.imageshack.us/img513/5838/gtrfrontmj4.jpg (http://imageshack.us)
http://img513.imageshack.us/img513/gtrfrontmj4.jpg/1/w451.png (http://g.imageshack.us/img513/gtrfrontmj4.jpg/1/)

http://img401.imageshack.us/img401/1459/gtrrearso9.jpg (http://imageshack.us)
http://img401.imageshack.us/img401/gtrrearso9.jpg/1/w500.png (http://g.imageshack.us/img401/gtrrearso9.jpg/1/)

Cliff - LI-USA

TSi+WRX
01-05-2009, 12:27 PM
Yea, I have been waiting for this car by entire life. Finally got my wife out of anethesia school and will be pulling the trigger this spring.


Congrats! :):D

speed-dreams
01-05-2009, 12:35 PM
do the LI HP heads have both transmitting diodes on the same side?

Laser-InterceptorUSA
01-05-2009, 12:36 PM
do the LI HP heads have both transmitting diodes on the same side?

Yes.

Cliff - LI-USA

GTRstikya
01-06-2009, 06:30 PM
Congrats to the both of you!

If you can fit one sensor, you can easily fit two, one at each location on each side. The problem with just one center mounted sensor is providing adequate protection to the headlights even with the LI HP LE which is why we recommended no less than two sensors for all applications. We will gladly sell you an LI HP LE DUAL but we cannot guarantee JTFG performance with only one sensor fore and aft!


Cliff - LI-USA
Thanks, I'm needless to say, very excited!:)
It's not so much room as ease of fitment...those locations were what I was going to try for...but I don't know exactly how the area is setup. I do know 1 grill head on my Infintiy was simple, but 2 would have been a nightmare for me to get flush and even, given the upcurve of the grill frame.

I want the 4 head, so if I can't figure it out, i'll hire it done.

Laser-InterceptorUSA
01-06-2009, 06:45 PM
Thanks, I'm needless to say, very excited!:)
It's not so much room as ease of fitment...those locations were what I was going to try for...but I don't know exactly how the area is setup. I do know 1 grill head on my Infintiy was simple, but 2 would have been a nightmare for me to get flush and even, given the upcurve of the grill frame.

I want the 4 head, so if I can't figure it out, i'll hire it done.

You should have no problem with the install on The GT-R! I will send you additional slim sensor mounting brackets, which are a little easier to work with in difficult areas, then the standard L-Brackets. :)

Cliff - LI-USA

stikya
01-07-2009, 08:40 AM
You should have no problem with the install on The GT-R! I will send you additional slim sensor mounting brackets, which are a little easier to work with in difficult areas, then the standard L-Brackets. :)

Cliff - LI-USA

I will remember that when I order this spring/summer. I appreciate your assistnace on all this.

Laser-InterceptorUSA
01-07-2009, 10:08 AM
I shall be here!:)

Cliff - LI-USA

TSi+WRX
01-08-2009, 12:38 PM
stikya -

WK446 and his friend may be able to give you further ideas. :)

http://www.radardetector.net/forums/cincinnati-microwave-zr4/39292-interesting-zr4-performance-nissan-r35-gtr.html

Granted, that's the ZR4 - but the overall sizing is similar.