View Full Version : Okay Im having a problem w/the rear head. any ideas?
06blackgto
01-21-2009, 12:33 PM
Well this has been going on for awhile, but it's starting to get irritating. I have the rear head mounted on the front. and everytime I honk my horn or take off hard, like racing, the rear sensor starts going off? every single time, it seems to be working fine, I'll find out for sure tonight, I'll use a remote and my phone veiwfinder and see if it will light up like it use to. Im hoping it's just a loose connection, but I'll just have to trace the wire. has this happened to anyone else?
it only goes off when I do either of the two things.
The Breeze
01-21-2009, 02:36 PM
Yes...mine does the same thing. My CB sets it off as well, when I have the amp on. I talked to Belscort about this, and I don't really remember what they said, other than there is nothing that can be done about it.
category4
01-21-2009, 03:57 PM
I would guess a voltage spike on the line.
focalcivic
01-22-2009, 12:40 PM
How do you have it wired, clean power and a solid ground?
06blackgto
01-23-2009, 07:58 AM
How do you have it wired, clean power and a solid ground?
I have the power going to a fuse in the fuse box, I'll have to see which fuse it's running to. and I'll recheck the ground. It was grounded to the frame, I'll clean it and check it out... thanks.
REBinc
01-24-2009, 07:54 PM
Well I have a GTO too w/ the ZR4s, but my rear is in the rear. I don't have any problems with falsing under any conditions.
06blackgto
01-25-2009, 05:09 PM
The only time it falses is when I hit the horn, or vibrations from taking off. other then that it works like a champ. so when it warms up, Im going to check the wiring out. I have a feeling it might be the rear head cable acting up.
AirMoore
01-25-2009, 06:54 PM
Noisy electrical system.
Try a filter or run its own wires straight to the battery for both the pos/neg.
MEM-TEK
01-25-2009, 07:36 PM
The only time it falses is when I hit the horn, or vibrations from taking off. other then that it works like a champ. so when it warms up, Im going to check the wiring out. I have a feeling it might be the rear head cable acting up.
Exactly how do you have the ZR4's power tapped into the fuse box, and how is the ground connected? Vibrations triggering the false shifter alerts sounds like a bad crimp or bad connections for either your power or ground.
06blackgto
01-28-2009, 09:43 PM
Exactly how do you have the ZR4's power tapped into the fuse box, and how is the ground connected? Vibrations triggering the false shifter alerts sounds like a bad crimp or bad connections for either your power or ground.
Yeah I'll have to check it out. I forgot which fuse I have the power wire going into. and I'll check on the ground. but it does seem like vibrations causing it. the weather has been kinda crappy here, I'll check it out when it warms up alittle. for now the goat is hibernating in the garage. If the garage was only heated.:rolleyes:
REBinc
01-28-2009, 10:47 PM
FWIW, I used SPARE 18 for my power, and the right screw at the bottom of the fuse box w/ a spade connector for ground.
06blackgto
01-29-2009, 06:19 PM
I believe that's where I put my ground wire.
MEM-TEK
01-29-2009, 06:32 PM
I believe that's where I put my ground wire.
Try re-crimping the spade connector on the ground wire?