PDA

View Full Version : project



axel_ny
02-10-2009, 11:15 PM
the vehicle: 05 yamaha r1 (tuned)
the device: lasermask 2 heads in front , veil headlights and 8500x50 radar detector
the project: custom brackets for devices plus homemade system for helmet alert.
the ideas & future project : laser jammers must be install to be easy taken off and remount on car ,only for long trips (whole project max 30 minutes job - uninstall/install) , the radar detector it will be attach with velcro an a flat surface to be easy remove when park or switch with car. one head jammer will be up front under front "nose" unobstructed , the second one will be behind the windshield, on a flat surface. the mount brackets for lj and rd will be glue on the inside of winshield with epoxy or something similar. the smart cord from rd , i will use the alert red led for warning in the helmet, so i have to solder and extend the wires. also i have 2 helmets and 3 jackets that i use regular in a year. i plan run a phone flat wire from rd under the tank with exit by driver seat, all 3 jackets will have prewire one cord in liner run from front left side bottom all the way to neck collar , with phone plugs ,the helmet will have ph plug and the red led attach to the other end , plus one for jammer.
well all i need is to get the wire prep with the right lenght for jackets , radio shack visit , a warm day to take the bike apart , brackets.
if any bikers here , please let me know what do you think , i will not "invest" any penny more than what`s for ph plugs and a switch + fuse, that`s what`s missing from my list. i will post some pic once i am done.

axel_ny
02-11-2009, 11:44 PM
project start , i got the brackets , and are mount on windshield, hope it holds, that way i may have chance to have a clear vision to radar detector, also i clean the extra tint paint , so what`s left is the light smoke windshield, and jammer should work...

axel_ny
02-12-2009, 05:49 PM
some pic ...
http://audiforums.com/forum/picture.php?albumid=272&pictureid=3578
here is how it looks from driver view, jammer top , 8500x50 bottom. the shield will be black again except the jammer and rd window...for better performance. i choose rd to be at the bottom because i have more chance to see it than up top , and the jammer will perform better cover if is higher (second jammer is under headlight)
and a view from side , the brackets are pretty much level, regard pic, will have velco for easy move remove items.
http://audiforums.com/forum/picture.php?albumid=272&pictureid=3579
the brackets are hold with jb weld and sica (loctite epoxy)

crazyVOLVOrob
02-12-2009, 07:01 PM
All you need is one jammer head up front and one in the rear and you will be completely covered!!!! this was test with RacerX's bike when we were in Arizona

FoolishOne
02-12-2009, 07:04 PM
Very cool.

We don't get to see very many bike installs. A pic of the final install is a must.

axel_ny
02-12-2009, 07:34 PM
2 jammer heads are better than one, plus with the extra windshield high mount i may cover some of my helmet :D. for the final it will be a while. still have on the list : run helmet warning wire (bike, 3jackets , 2helmets) with plugs, i have to integrate2 systems in warning wires (8500x50, lasermask) , install rd and lj and add switch to circuit.i will try to take pic as i go..

crazyVOLVOrob
02-12-2009, 08:05 PM
Radar Screamer system.... will be loud

I would recommend the Speed cheetah wireless stuff but doesn't work with the laser mask

Though it would make install much more portable

axel_ny
02-13-2009, 10:35 PM
http://audiforums.com/forum/picture.php?albumid=272&pictureid=3612


got a clip with bike jamming ultralyte today, i may post it soon , with the above set-up. i will veil the helmet soon, is the weakness point

axel_ny
02-16-2009, 08:04 PM
i veiled a helmet , of course was the used one , and is ready for test. clear coat on top too. plan to do the second helmet , the good one but my aircan is gone , so i will do it soon.
the set-up i plan for bike works, we test it in Houston this past weekend, all i need is get the helmet issue fix, and have everything wired , warning included in helmet.

crazyVOLVOrob
02-17-2009, 10:39 AM
Seriously you don't need to VEIL your helment.

All you need is single head up front and single in the rear. I really wish you would have tested that:rolleyes:

axel_ny
02-17-2009, 04:46 PM
Seriously you don't need to VEIL your helment.

All you need is single head up front and single in the rear. I really wish you would have tested that:rolleyes:

i test it already , helmet needs protection or stronger jammer. we test with different guns, the weakness point is helmet. since they test with one head upfront ,laser guns change and if the laser point is wide more chances to get weakness spots easy.
veil the helmet is not big deal , airbrush do the job.

axel_ny
02-17-2009, 05:51 PM
ok ,to be clear on this , i look close to my helmet and has a design that has 1/8 metalic-silver lines all around the helmet surface, is exactly like when u paint kandy and u put the metalic base .so i think is very reflactive plus has white in front /and top design, 2 thin coats of veil , cover with 2 of clear coat should be what it needs.
that`s the type of helmet
http://www.hardracing.com/images/SHOEI/shoei_41.jpg

nategr8ns
02-17-2009, 07:31 PM
someone correct me if I'm wrong, but doesn't clearcoat over the veil defeat the purpose? Sure it protects the Veil but still...

axel_ny
02-17-2009, 08:23 PM
someone correct me if I'm wrong, but doesn't clearcoat over the veil defeat the purpose? Sure it protects the Veil but still...

you are wrong, we just test that in Houston (sunday 2.15.09). i have on my audi airbrush veil , like 8 light coats , and 2 coats of clear coat. and i did better than last time when Stealth Stalker test my set up in dallas. this time when he was in Houston he got me with 100-150 ft less than last time , and in few runs i jtg all 3 guns we use for test (zr3 / veil) i use dupli-color clear coat . and also i just finish my helmet the one above with 3-4 light coats of veil airbrush plus 2 light coats clear coat with airbrush too , just spray the can in jar and it works. the helmet is not so shiny and is kind of gray , but at my speed color and shine is the last thing i am thinking. hope to test the bike soon , i am still behind with my wiring.
in clip i try to shoot the headlights , was just a run to have it on video , wasn`t actually the test, but i plan next time to get a better video.
http://www.radardetector.net/forums/lounge/42575-sunday-2-15-meet-downtown-houston-10.html

axel_ny
02-18-2009, 05:38 PM
Seriously you don't need to VEIL your helment.

All you need is single head up front and single in the rear. I really wish you would have tested that:rolleyes:

VEIL HELMET , DONE!
looks good to me , is satin look instead of high gloss. i use 1500 wetandry sandpaper fallow by polish/buff with platiX paste , clean the helmet , and airbrush 4 light coats of veil and 2 airbrush light coats clear coat .

http://audiforums.com/forum/picture.php?albumid=272&pictureid=3694

FoolishOne
02-18-2009, 06:00 PM
But does it cut down the PT's? That is the ultimate question.

axel_ny
02-18-2009, 07:19 PM
But does it cut down the PT's? That is the ultimate question.

i am new around here , don`t know what PT is . all i know is when the laser will hit the helmet wouldn`t be too much laser back to get the reading. a little by little helps. we do plans some more laser test in houston and hope to tape some of motorcycle/veil helmet tests to see the results, so far if the helmet has silver, white or reflective in it would give the speed right away. when they test that bike in arizona they didn`t shoot the helmet, plus is more than 18 inch from jammer ....

FoolishOne
02-18-2009, 07:37 PM
I guess I assumed you Veiled the helmet because it was reflective enough to send some of the beam back to the gun for a speed reading, despite the jammer.

(A PT is a 'punch through'. Imagine a big bubble around you, and when the laser beam is too much for the jammer head, or its out of reach for the jammer head, or, I don't know the heads over heating and shutting off, anything that would would allow the laser beam to reflect back to the gun, is considered a pun-through.)

So, I was wondering if 1) the head was leading to punch throughs (resulting in speed acquistion) and 2) if Veiling the helmet (with clear coat) helped reduce or eliminate PT's.

axel_ny
02-18-2009, 07:55 PM
So, I was wondering if 1) the head was leading to punch throughs (resulting in speed acquistion) and 2) if Veiling the helmet (with clear coat) helped reduce or eliminate PT's.
yes , the jammer lead to pt for sure , but again the jammers wasn`t mount for good and level, just by eye , plus i should adjust them when i am on bike because the front fork get`s lower when i ride so the jammer heads should be level with me on bike.
from what i see at my car headlights after airbursh veil plus clear coat was better than foam /veil only.
my project goes better i short the jammer wire and add some phone plugs at end , plan to do the jackets and inside helmet warning.

axel_ny
02-19-2009, 09:29 PM
got some progress today , i finish my helmet warning system , i run the lasermask speaker and the red led from escort x50 in the helmet via a ph plug with 4 wires.
will be easy to attach/remove with velcro , so i can use it with both helmets.

axel_ny
02-25-2009, 11:51 PM
some progress here , got the wires ready from front devices all the way to helmet warning . also i hardwire rd to an batt to test the red alert led and is just great , i like the way it is. i plan do a short movie once everything is done , it will be the best way to show the set-up , i may need to do it in a parking lot by some store to have the alert led on from doors, also an laser test would be good too to test the speaker in the helmet.
so.. i give up on wire the jackets , but i will use an coil ph wire from under front seat where it will be a ph plug. and will go all the way under the jackets to the helmet in another ph plug.:D

axel_ny
02-27-2009, 09:49 PM
project done ! took me 3 hours to run and terminate all the wires. tomorrow i plan to set the volume for lasermask for the speaker in the helmet , also i plan to level the heads with me on bike.
a video with install will be posted soon !

axel_ny
03-08-2009, 05:43 PM
enjoy:
the 3 green lights are for (left to right) neutral , lasermask , escort smart cord. but.. in riding position i see only the first one. the other 2 are under the radar detector bracket.
also in top in lasermask jammer head , the second is under headlights.
.
http://audiforums.com/forum/picture.php?albumid=241&pictureid=4034

axel_ny
03-08-2009, 08:05 PM
vids are here: http://www.radardetector.net/forums/detector-counter-measure-videos/43436-video-yamaha-r1-rd-veil-lasermask.html


also to add to this project thread , the led warning inside the helmet must be adjust for best performance like this: led must be under the horizon line and must be place in the dominant eye side . one of the eye is dominant , do a test and find it, my case is left , so left eye takes the alert better, the attention is better. do some search and u will see what i am talking about.

jasonb986
03-10-2009, 10:01 PM
man that looks like a nice setup for your bike, it sounds like you have everything covered right now:D