PDA

View Full Version : non-white plate



marlinspike
02-23-2005, 06:32 PM
I was told that with a white plate like mine it's pretty much expected that VEIL will make it darker. Well, my plates are beat to heck anyways, and the rest of the cars in my family all use Bay plates and I was thinking, would a plate like this be
a) harder to get than white without VEIL
b)harder to get than white with VEIL (i.e. if both have VEIL)
c)not so dark looking after VEIL application
d)some combination of the above
http://www.chesapeakebaytrust.org/images/CroppedBAYPLATE_OurBay-rgb.jpg

marlinspike
02-23-2005, 06:32 PM
Wow, that became huge. It was much smaller on the chesapeake bay trust website where I got it from.
Richard

Veil Guy
02-23-2005, 07:38 PM
Yeah. Its huge and I got a 1200x1600 display and I still had to scroll!

Nice looking plate, by the way.

I would expect that it may be somewhat harder to get, except, if the material is retro-reflective in nature.

Take a flash light in a dark room and shine on the plate. If you see a retro-reflective effect - almost a sparkling look then the plate will still be pretty visible to the laser, I expect.

I would expect that VEIL, while it would likely darken the plate, it wouldn'y be as noticeable as with a very light/white plate.

Did I get the question right? :wink:

The Veil Guy 8)

marlinspike
02-23-2005, 08:17 PM
Yeah you did. BTW, I think something in the VEIL was left behind in my plate when I stripped with rubbing alcohol cause even in natural light (well, street lamp light which makes the uncoated plate look white, so it's obviously close enough for my eyes to adjust) there is a very very slight purple tinge.
Richard

Veil Guy
02-23-2005, 08:43 PM
That's why we don't recommend it to go on painted surfaces for this very reason.

One of the materials tend to leech ito some plates (especially light/white ones) that have the retro-reflective (3m) membrane.

Soaking it in rubbing alcohol tends to remove the slight residue in a short time. If you are going to recoat it, I wouldn't be too concerned with it though.

That's why we recommend coating a plastic plate cover. A couple of my PA plates (especially with the earlier formulations) were so affected.

We're working on engineering it out...

The Veil Guy 8)

marlinspike
02-23-2005, 08:49 PM
I see. It will still be effective though, right? I'm planning on just leaving it like this for my drive home, then buying some amonnia, filling up a tray and just dropping the plate in there to soak, then reapply the veil with a roller and see how that works. Will I still be covered for my trip home? I'll probably get one of those treasure the chesapeake plates at some point, but it's kinda cool that my plate is from 1985. I wish my dad had bought one of the 350th anniversery plates when he got this car.
Richard

Veil Guy
02-23-2005, 09:08 PM
Absolutely!

Our planned improvements are more aesthetic in nature.

The Veil Guy 8)

marlinspike
02-26-2005, 06:19 PM
So, just to make sure, even though it's streaky and has purple undertones, I've covered fine, right? I know I said I would stip and reapply, which is what I said to my dad when he saw it, but he said not to bother if I'm well protected since it looks like something a little fishy, and therefore cool. So, if I'm protected fine there's no point in my stripping and reapplying.
Richard

Veil Guy
02-26-2005, 07:24 PM
The plate shouldn't appear that way. I would feel more comfortable if your plate was covered consistently and not as it appeared in the pics.

This tendacy with the "residue" colour is perhaps more compounded by the fact that your plate looks like it is pretty worn due to its age.

The new plate you suggested may be a good choice. It all depends on whether it appears more retro-reflective than your original plate.

My choice would be to select the plate that has the least reflectiveness untreated.

The Veil Guy 8)

marlinspike
02-26-2005, 08:07 PM
Yeah, I thought about the new plate idea, but I think I'll at least wait until my tags are due so that I can avoid some fees. It doesn't appear as it does in those pictures any more...I guess I'll take some more pictures tomorrow. Part of me wants to stick with the old plates cause they're 19 years old an I like my plate number.
Richard

Veil Guy
02-26-2005, 10:02 PM
I hear you.

The Veil Guy 8)

SmaartAasSaabr
02-26-2005, 10:08 PM
I have a 26 year old plate on the Firebird and it's in absolutely horrible condition, those arsewipes at the SAAQ better give me a new one! :lol:

Veil Guy
02-26-2005, 10:21 PM
PA has an interesting plate style of which I have been considering.

Its a D.A.R.E plate.

The nice thing about the plate is that it is, for the most part, black.

This should be especially good for being stealth for laser.

The Veil Guy 8)

marlinspike
02-26-2005, 10:59 PM
BTW, I had gone outside to take a picture figuring why should I wait for morning...something about VEIL being on a license plate does not agree with flash photos. Even at ISO 3200 there wasn't enough ambient light so I guess the photo will wait for tomorrow.
Richard

Veil Guy
02-27-2005, 08:39 AM
marlinspike,

are you suggesting that we help with photo-flash cameras?

that would be funny.

the veil guy 8)

marlinspike
02-27-2005, 10:14 AM
Not really. It was still legible, but it had this kinda grey grain to the plate. I don't know why I deleted the picture instead of posting it...I'll take another one tonight (or try today and see if flash + daylight has the same affect).
Richard

marlinspike
02-27-2005, 11:45 AM
So...here's how my plate looks during the day
http://davidson.smugmug.com/photos/16578418-O.jpg

and here's how it would look in a night picture lit with flash (or any picture where the real lighting is the flash, to similate this I just used a fast shutter speed and a small aperature, giving the natural light very little time to expose).

http://davidson.smugmug.com/photos/16578419-O.jpg

Richard

Veil Guy
02-27-2005, 01:55 PM
I appreciate the pics.

You're correct if those pictures are accurate in their colour rendition.

This plate appears a bit purple is that how it really looks?

I expect this plate to appear more neutral gray in colour and certainly less streaky in appearance.

I am going to try coating a plate, taking a before/after picture, and then post it for comparison.

The Veil Guy 8)

marlinspike
02-27-2005, 02:12 PM
Yeah, my white balance in that picture is pretty spot on so that's as close as the color can get.
Richard

marlinspike
02-27-2005, 05:18 PM
Oh, and even though it may not look like it should, you think I'm still covered? It's so friggin cold up here, even a garage won't help, and my mom wouldn't appreciate me using the sinks, so I think it'd be best if I wait until I'm back at school to strip and reapply.
Richard

Veil Guy
02-27-2005, 06:35 PM
Optimally? Perhaps not entirely.

Using the sink really isn't a problem if you have access to either household ammonia and/or rubbing alcohol. You sink will be fine.

I have done it many times, myself.

The Veil Guy 8)

Veil Guy
03-06-2005, 11:17 AM
Here are some pics:

Follow this link:

http://www.radardetector.net/viewtopic.php?t=611&start=16

The Veil Guy 8)