View Full Version : 9500ci display via Nav?
MikeN
04-02-2009, 08:38 PM
New to the forum... Just purchased the 9500ci and have a Kenwood dnx8120 nav in an '08 vette--has anyone used the nav as a display?
category4
04-02-2009, 08:43 PM
One of our members , Swarga, did this.
HUD-Two? on Yahoo! Video (http://video.yahoo.com/watch/4424149/11861385)
MikeN
04-02-2009, 08:56 PM
Swarga's video led me to this forum... linking it to the HUD is amazing; but, do not see how I could purchase this... any guidance?
ROBSMST
04-03-2009, 09:51 AM
interesting stuff, I'm going to keep an eye on this thread.
category4
04-03-2009, 01:30 PM
Swarga's video led me to this forum... linking it to the HUD is amazing; but, do not see how I could purchase this... any guidance?
You might try sending him a PM. I too have expressed an interest to him for one. The more that want one the cheaper the cost will be.
MikeN
04-04-2009, 05:28 PM
I tried; but, being new to the forum I need to have more posts to utilize pm... in time...
Where did you install your display and control? it seems like every GM utilized every little space--I was thinking above the mirror for the display (but want Swarga's HUD interface) and in the ash tray for the controls..
hoben
04-04-2009, 11:56 PM
What did swarga say about price, and how can we reach him?
swarga has chosen not to receive private messages or may not be allowed to receive private messages. Therefore you may not send your message to him/her.
If you are trying to send this message to multiple recipients, remove swarga from the recipient list and send the message again.
FoolishOne
04-05-2009, 12:58 AM
You would have to wait for swarga himself, but I tend to think these are more 1-off things then really purchasable products. I'm sure for a couple thousand, he would do it, though.
His other threads: (He first did the V1, then the ci)
http://www.radardetector.net/forums/escort/42474-its-not-just-valentines-anymore.html
http://www.radardetector.net/forums/show-off-your-install/43055-hud-one-version-1-0-a.html
That second link really shows what swarga puts into these; lots of money and lots of time.
Oh, cat4 predicted it on 1/15:
http://www.radardetector.net/forums/radar-detectors-general/41846-anyone-tried-build-hud.html#post492342
category4
04-05-2009, 01:58 PM
You would have to wait for swarga himself, but I tend to think these are more 1-off things then really purchasable products. I'm sure for a couple thousand, he would do it, though.
His other threads: (He first did the V1, then the ci)
http://www.radardetector.net/forums/escort/42474-its-not-just-valentines-anymore.html
http://www.radardetector.net/forums/show-off-your-install/43055-hud-one-version-1-0-a.html
That second link really shows what swarga puts into these; lots of money and lots of time.
Oh, cat4 predicted it on 1/15:
http://www.radardetector.net/forums/radar-detectors-general/41846-anyone-tried-build-hud.html#post492342
I had a little inside info when I predicted it on 1/15. I got some of the logs off my car for Swarga to figure out the radio muting functions, so I knew he was working on something.
I have an idea of the costs based on conversations with Swarga, but I'll let him post that info should he desire.
If you check my profile you will see pics of where I mounted all my 9500ci hardware. I'm looking for a spare center console so I can flush mount the control module and display, but so far all I have found have been quite expensive.
MikeN
04-05-2009, 03:48 PM
Hopefully Swarga posts a price; but, I hope not what FoolishOne is predicting... I don't even what to guess at the time investment that went into pulling off the HUD display; but, it sounds like a lot of folks are really impressed and maybe volume could make it reasonable if he tries to productize it.
Funny, i was thinking the same location for a flush mount control module; but did not see how to get around the power button on the side of the control module, so I figured I had to think about locating it somewhere else...
as far as the spare center console, I'm sure they are scarce (unless OEM) and at a premium--I hear some '07 vettes are upgrading to get the chrome trim of the '08s...
MikeN
04-05-2009, 04:03 PM
Beside Swarga's HUD interface....
Has anyone integrated the 9500ci display output into a Navigation Head Unit? Perhaps through one of the alternative video inputs?
category4
04-05-2009, 04:17 PM
If I flush mount it I will tie the 9500ci power supply into the LI kill switch and kill both with the same switch.
MikeN
04-05-2009, 08:59 PM
Got it--You got me back on the console location given I add a switch or tap into an aux function in the head unit. Only catch is the console will need a perfect cutout since the control does not have a bezel--I guess it could also be flush mounted on the front portion of the arm rest lid... it may not be as convenient for the finger tips as the console; but, if I muck-up the cutout, the arm rest lid is a heck of a lot cheaper than the console to replace...
category4
04-06-2009, 05:34 AM
I had not thought of that the arm rest cover is a lot cheaper than the center console. I have been pricing them lately and the consoles are coming down in price. They used to be about 600, now they can be found for about 1/2 of that.
swarga
04-06-2009, 02:46 PM
Swarga's video led me to this forum... linking it to the HUD is amazing; but, do not see how I could purchase this... any guidance?
At the moment it's not available at any price, as it's still not complete (although it is getting close). Once all the bugs are worked out then I can start thinking about how to make more. The ultimate price will depend on how much it costs to have a commercial board house make the boards and populate them with parts.
I figure if you can afford $50,000 for a Corvette and $1600 for a 9500ci, you'll be able to afford a HUD-One. :D
category4
04-06-2009, 07:38 PM
Swarga's video led me to this forum... linking it to the HUD is amazing; but, do not see how I could purchase this... any guidance?
At the moment it's not available at any price, as it's still not complete (although it is getting close). Once all the bugs are worked out then I can start thinking about how to make more. The ultimate price will depend on how much it costs to have a commercial board house make the boards and populate them with parts.
I figure if you can afford $50,000 for a Corvette and $1600 for a 9500ci, you'll be able to afford a HUD-One. :D
Gotta trust you on this one, put my name on the waiting list. :D
swarga
04-06-2009, 09:18 PM
put my name on the waiting list. :D
Don't worry, my friend - your name is in the #1 slot. :D
category4
04-06-2009, 09:25 PM
put my name on the waiting list. :D
Don't worry, my friend - your name is in the #1 slot. :D
Thank you kind sir, it will be much appreciated.
MikeN
04-07-2009, 06:45 AM
At the moment it's not available at any price, as it's still not complete (although it is getting close). Once all the bugs are worked out then I can start thinking about how to make more. The ultimate price will depend on how much it costs to have a commercial board house make the boards and populate them with parts.
I figure if you can afford $50,000 for a Corvette and $1600 for a 9500ci, you'll be able to afford a HUD-One. :D
For now then, I guess I'll just install the display for easy future removal... and, look forward to your progress on getting the HUD-One boards made. Just add me to your waiting list...
On a related note. You should also be aware on the audio forums, there are a lot of corvette folks not happy with their factory Navs (or don't have a factory Nav), and are adding aftermarket Nav head units... One of the drawbacks, is that they loose the audio/Nav-related connectivity to their HUDs. Not knowing the complexity of your work, there may be a secondary market for your talents on the Nav/audio side of the house.