View Full Version : Light Output
2001SE
10-01-2005, 07:08 PM
I just veiled my headlights on my 01 Maxima. I modified the headlights to have the TSX projectors which make a lot of light.
At night Inoticed that the beam pattern of the light is a lot thinner and not with much intensity as before. It came down by maybe 25%.
What could be the reason, I put too much? I just put one layer and I spread it evenly on the headlight.
If it was a reflector headlight you wouldnt really mind because the beam pattern would be the same, but with projectors it really ruins and weakans the beam pattern.
What can I do?
If I want to take it off, how can I take the Veil off?
brick
10-01-2005, 07:53 PM
Veil definitely shouldn't reduce light output by 25% from any headlight. Does the headlight look noticeably darker in the daylight? It should only be a light, somewhat smokey coating but not very noticeable at all. It is easy to take off with rubbing alcohol as per the instructions if you need to. Most of us (more like everyone) needs to go through a couple of applications to get it right.
2001SE
10-01-2005, 08:57 PM
yeah, I am pretty sure its too dark during the day causing it to get worse light output at night.
I'll have to take it off tommarwo and try a lighter coat.
AH! what a waste of veil lol
Veil Guy
10-02-2005, 12:34 AM
look at jason's video,
this will suggest the appropriate amount.
veil guy 8)
Dilip
10-03-2005, 11:20 AM
hi
actually with me, i have maybe over 70% reduction in light output, and i also have projection style Xenon HID headlights. I dont think i messed up my VEIL, i did it properly.
It has come to my observation that VEIL wont affect the older style headlights much, butthe newer projector style ones would be greatly affected. U can see pics in one of my separate threads.
I recently re-veiled my car using the Veil guy's video method, now i have hardly any streaks but its still just as dim.
Veil Guy
10-03-2005, 02:41 PM
I have noticed on a late-model BMW with angel-eyes that the "harshness" of the light output is somewhat diminished with VEIL - not so much the light output, but the starkness of the light pattern.
Is this, perhaps, your observation?
Veil Guy 8)
Dilip
10-03-2005, 10:41 PM
Well......basically if you stand in front of your car and look at it, your lights will seem just as bright with or without veil. but if you sit inside your vehicle and look at the road......for projector style HID lights, the brightness of the road is way way way less than before.
For my car.....my fog lights seem to be the same brightness as before as they are not projectors. But my low beam & high beam has lost a lot of its lumination.
Is there any possible way of inventing a VEIL that is not so dark coloured?
2001SE
10-04-2005, 12:24 PM
you know what I did?
my friend suggested it btw, him and his ideas hehe
Where you see the marks of the projector's trying to shine through the plastic where the Veil is blocking it. Take off the Veil with a small brush carefully with some alchoal.
Only where the lines of the projectors trying to come out through the Veil.
Once you do that, you can see perfectly like before only there isnt a little bit of Veil protecting that area of where the projectors are trying to shine through.
I am pretty sure its bad against the cops beacuse if they hit that spot they'll get a reading most likely, but at least 80% of the headlight is still Veiled and I can see much better at night.
With a laser jammer I see this option being the best. oh, another negitive is that if you dont do it carefully like I did it will look ugly hehe.
Veil Guy
10-04-2005, 04:50 PM
2001SE,
Fascinating approach.
We just may have to conduct some tests to see what impact - if any - it has on a vehicle's laser cross-section (LCS).
With respect to perceived darkness-issues; we are working on it...
Veil Guy 8)
2001SE
10-04-2005, 08:10 PM
2001SE,
Fascinating approach.
We just may have to conduct some tests to see what impact - if any - it has on a vehicle's laser cross-section (LCS).
With respect to perceived darkness-issues; we are working on it...
Veil Guy 8)
Happy to hear its a good idea.
That will be great to test this idea with laser guns to see how and when the laser will punch through.
But yeah, if you have projectors on your car for headlights, I think this could be a good idea if you just take off the veil where the projectors shines through.
I did it at night because you can see EXACTLY where the veil should be taken off.
Dilip
10-04-2005, 10:00 PM
Hey there,
I was actually thinking of doing the exact same thing, however I'm afraid that the little hole in the veil coating will allow the cops to get a reading on you easily.
Since its just a small hole exactly where the projector is, will the cops be able to get a laser reading on you easily?
I know that here in Hong Kong, police are trained to target your license plate so it might help in my situation.
The VEil guy: could you perhaps elaborate further on the possibility of a more transparent Veil in the near future?
Dilip
10-04-2005, 10:20 PM
Here are two pictures.
Below, i just used photo shop and copy pasted a picture of the tiny section of my headlight without the veil, onto this picture that has the veil. Notice how ther'es hardly any difference in the darkness?
http://home.netvigator.com/~dilipb/unveiled.jpg
Below i just used an eraser to show how small the area that needs the veil removed. Would this be significant?
http://home.netvigator.com/~dilipb/unveiled2.jpg
Veil Guy
10-09-2005, 01:54 AM
Tough to tell.
An area [removed] of that size and shape may hurt you somewhat, although you should do better that not having the lights treated at all.
Veil Guy 8)
stalker
10-09-2005, 02:10 AM
good thread guys, id be interested in seeing the results of this as I am about to purchase a car with the projector type headlights...and I soo wanna chuck veil on.
2001SE
10-09-2005, 02:12 AM
You dont have to take off the veil infront of the whole projector. JUST the bottom half, where the lights comes through. If your headlight is veiled now, you would be able to see excatly at night clearly where the three lines of the projectors are coming out. You should carefully I think take off the veil there, not too much, and that should improve the lighting significally and basiclly the same normal.
At least you'll be able to see the cut-off line much better and more clearly, because if its veiled you couldnt even see the cut-off which is bad for the light output
Iknox
11-15-2005, 06:21 PM
yea i lost about a 25% output of light but not enought to hurt me to bad it would be cool to have stick on coat of veil and i could cut the excess off so every one would have the right amount
Road Warrior
11-15-2005, 09:34 PM
Well... I've done two consecutive coatings (one week apart)... I really hate those God damn laser traps... I have no problem driving my car anytime in the dark... and I have regular headlights... cause I'm just a regular guy :)
stalker
11-15-2005, 10:55 PM
I run HID so I heard there is a problem with these.
2001SE
11-18-2005, 11:31 AM
Try to do what I did. Just take off the veil from where the projectors shoot the beam. Maybe you'll like it
stalker
11-18-2005, 02:13 PM
no thanks, I like my headlights too much without wrecking them with a tint...
2001SE
11-28-2005, 01:56 AM
no thanks, I like my headlights too much without wrecking them with a tint...
why exactly will you wreck them?by doing what? clearing the veil coat with some alcohol clears it right off
stalker
11-28-2005, 02:15 AM
what i mean is, I have the HID projector lights and ive seen that veil does not agree with the globes on projectors...and i cannot afford to have a slight tint on lights as it is illegal and the police are very anal with this sort of thing.
Dilip
11-28-2005, 02:31 AM
yes........projector lights and veil don't go well together. I wish i still had my old car, then it would've been perfect since those were not projector style lights.
binarysleep
11-30-2005, 01:39 AM
Couldn't you just open the headlight assembly up and veil the chrome bezel that surrounds (reflects) the other lighting components (high beams, fog lights, turn signals, etc.) leaving the HID projector bare.
I might end up doing this. Anyone in Texas have a Lidar gun to test this setup out?
stalker
11-30-2005, 01:49 AM
nope, wont work...they will get a reflection from the glass on the front of the headlight...same as shooting a lidar at a windscreen...you will get a reading
binarysleep
11-30-2005, 04:04 AM
Veilguy says glass is not reflective. (http://www.radardetector.net/Windsheilds-5132t.php) :?
stalker
11-30-2005, 05:11 AM
yeah well thats crap...how come i can get a very fast lidar reading from a window??
binarysleep
11-30-2005, 07:53 AM
I'm just curious. :? Perhaps it has to do with the angle of the glass to the gun?
If the windshield is an easy hit, then wouldn't all the Lidar training manuals suggest it first? It is a much larger target afterall.
stalker
11-30-2005, 08:28 AM
no..the plate and headlights are better targets due to the angle...they get a direct reflection rather than an offset one.
Gregor
02-18-2006, 11:36 AM
Just wondering if there is any update on the issue of Veil on projectors /HIDs. My new car has projector low beams as well as projector fogs.
Doing some night regfectivity tests, the low beams are not all that reflective so I might be able to remove a small amount in front of the beams. However for some reason, the fog lights reflect extreemly well.