View Full Version : V1 vs X50
milkman
04-06-2009, 03:23 PM
I have had my V1 for 5 days now and the X50 has stayed right with the V1. At times the V1 had about a 3 second lead. I have them about 3 ft. apart. On the V1, i have the x and pop off. It has been just as quiet as the x50. I am very pleased with the V1 but the x50 has held it's own. Everyone says the V1 is very chatty but at this time i will have to disagree.
djrams80
04-06-2009, 04:38 PM
Since you have them about 3ft apart, it's a good bet that some of your signals are being suppressed due to interference as each RD tries to filter the other one out. That being said, the V1 does not make up radar contacts(ghosting aside). It will detect the same signals as your X50, only sooner. If you live in a big city, where radar contacts are pretty dense, the V1's extra sensitivity makes for a very noisy RD.
milkman
04-06-2009, 05:24 PM
Since you have them about 3ft apart, it's a good bet that some of your signals are being suppressed due to interference as each RD tries to filter the other one out. That being said, the V1 does not make up radar contacts(ghosting aside). It will detect the same signals as your X50, only sooner. If you live in a big city, where radar contacts are pretty dense, the V1's extra sensitivity makes for a very noisy RD.
Thank you for the advice. All i was doing was just playing with them. I can see why they don't advise running two detectors together. I live in a rural area, that is probably why the V1 is so quiet.