PDA

View Full Version : Help someone who is mildly retarded install his LI...



Donut Patrol
04-15-2009, 10:15 PM
Well at least when it comes to electronics :p.

I'm switching my LI back to my summer car, and I have no idea how to wire up the power (yes it's very simply, I know, but I'm clueless). Now I'm sure your all wondering how I got it installed, I just had one of my fellow employees do it, but he's off for the next few weeks :banghead:. I fabricated some nice mounts, mounted the heads and routed the wires back to the firewall (not through it yet). Car is an E30 89 325I.

Questions (all basic electronic install questions)...

Where should I go through the firewall? Just the closest hole to the drivers side?What color wires do I tap into, and which ones (where do they lead to, ignition, lights, etc.)? Will there be a ground in there, where should I look for one? On the wires that I tap into, do I just strip an area and solder the power wires to that? Or do I tap in to them at the end? Also I don't need to wire the switch, correct?

I'd post this in the how to section but I'm trying to get this done by Friday. Thanks in advance.

btw If there are any ace installers in MA who wouldn't mind helping me out, shoot me a PM.

speed-dreams
04-15-2009, 10:36 PM
Contact Cliff for support... there are plenty of pics of BMWs installs in the LI forums as well.
You need to tap into a 12V source that's switched by the ignition, meaning when you switch the ignition on/off, your 12V source also switches on/off. As for the firewall, try to find a grommet where all the wires routes into your cockpit, try to slip the heads' wires thought the grommet.

axel_ny
04-15-2009, 10:39 PM
the best is if u run the supply from fuse panel, so on driver/passanger side firewall look for any other wires that go the other side or any rubber plug that cover an existing hole. after u run the wire get it all the way to the fuse block. buy an test lamp if u don`t have a meeter and find some ignition power from fuses (fuel pump, electric mirrors ,interior light.. etc)
also make sure your li wires has a fuse in line smaller or equal than the one u connect. for connection use some device that split one fuse in 2 u will find at auto store , all u have to do is one connection , no solder or tap. also your ground wire (black usually) needs a ring connector and find some screw that is tight on chassie ( by brake/clutch area)
any q let me know. don`t knwo your car to tell what color goes where , but with a test lamp or meeter u find anything(ignition / batt/ other devices supply)

Laser-InterceptorUSA
04-16-2009, 05:51 AM
Check out the BMW Install Section of the LI User's Forum here:

LI User's Forum - BMW Installs (http://85.125.82.130/LaserInterceptor/smf/index.php?board=36.0)

Let me know if you need addition advise, parts, mounting brackets, hardware, etc. :)

Good luck!

Cliff - LI-USA/LI-UK

Donut Patrol
04-16-2009, 12:59 PM
Check out the BMW Install Section of the LI User's Forum here:

LI User's Forum - BMW Installs (http://85.125.82.130/LaserInterceptor/smf/index.php?board=36.0)

Let me know if you need addition advise, parts, mounting brackets, hardware, etc. :)

Good luck!

Cliff - LI-USA/LI-UK

Thanks for the offer, there is a good chance you'll be getting a call Friday mid afternoon... :lol:

th3 factory freak
04-16-2009, 03:21 PM
OP: find out what type of fuses your car uses and get the add a circuit kit, that way you won't have to splice any wires for power.

Donut Patrol
04-16-2009, 04:34 PM
Just an update, I was doing some recon today and I think I'm going to come back through the passenger side and put the CPU behind the glove box. There is more room there, plus the hole in the firewall is larger.


OP: find out what type of fuses your car uses and get the add a circuit kit, that way you won't have to splice any wires for power.

Forgive my ignorance but what does this accomplish? Not splicing wires sounds good, but how does it work then?

category4
04-16-2009, 06:25 PM
The add a circuit fuse holder plugs into an existing fuse slot in your car. You remove the existing fuse, plug the add a circuit fuse holder into that fuse slot. then install the original fuse in slot 1 of the add a circuit fuse holder. You install a fuse into slot 2 for the new circuit to go to you jammer, then crimp the power wire for the jammer into the butt splice crimp connector, ground the ground wire to the jammer and you are done.

Amazon.com: Littelfuse FHA200BP ATO Add-A-Circuit Kit: Automotive

Donut Patrol
04-16-2009, 07:07 PM
The add a circuit fuse holder plugs into an existing fuse slot in your car. You remove the existing fuse, plug the add a circuit fuse holder into that fuse slot. then install the original fuse in slot 1 of the add a circuit fuse holder. You install a fuse into slot 2 for the new circuit to go to you jammer, then crimp the power wire for the jammer into the butt splice crimp connector, ground the ground wire to the jammer and you are done.

Amazon.com: Littelfuse FHA200BP ATO Add-A-Circuit Kit: Automotive (http://www.amazon.com/Littelfuse-FHA200BP-ATO-Add-A-Circuit-Kit/dp/B0002BGELQ)

Cool, that looks like it would make things alot simpler. Although I have a fuse box cover, so I'm not sure if I'll go with that. Also my fuse box is drivers side, and I'll be mounting the CPU passenger side.

Donut Patrol
04-17-2009, 07:47 PM
Okay just finished routing everything, I located my switch, mounted the CPU, connected the heads, and switch (pics to follow later). Now all I have left is to connect it to a power source. Does the glove box light sound like it would work? It's keyable, which I want. Should I piggyback both the power and the ground? Or should I attach the ground somewhere else? Also what are the extra wires on the switch?

Laser-InterceptorUSA
04-17-2009, 08:17 PM
Separate Dedicated Circuit whenever possible so the LI's CPU won't see any transients. :)

Click here for description of the wire loom: LI User Manual (http://www.laser-interceptorusa.com/mediac/450_0/media/LIUserManual.pdf)

Cliff -LI-USA/LI-UK

Donut Patrol
04-20-2009, 01:56 PM
Okay quick update, here are some pictures so far (more and better ones to follow)-

http://i235.photobucket.com/albums/ee311/MCTosi/night002.jpg

http://i235.photobucket.com/albums/ee311/MCTosi/night004.jpg

http://i235.photobucket.com/albums/ee311/MCTosi/night009.jpg

http://i235.photobucket.com/albums/ee311/MCTosi/night007.jpg



Separate Dedicated Circuit whenever possible so the LI's CPU won't see any transients. :)

Click here for description of the wire loom: LI User Manual (http://www.laser-interceptorusa.com/mediac/450_0/media/LIUserManual.pdf)

Cliff -LI-USA/LI-UK

If I just disconnected the light altogether, and hooked it up to those unused wires, would that work? Also there are wires going to the glovebox flashlight. Which wasn't an option on my car (doesn't have the flashlight), but has the wires. Would hooking it up to that make more sense? My only concern is the wires look to be a thinner guage (does that mean anything?).


http://i235.photobucket.com/albums/ee311/MCTosi/night010.jpg
(glovebox flashlight charger)

crazyVOLVOrob
04-20-2009, 02:05 PM
Just a suggestion if you are using the Stock alert speaker have it not be muffled and use a mini screwdriver to turn the volume to Max.

Unfortunately at highway speeds with windows down and music up I can't hear my LI alert so I rely on the V1 to give me a laser alert and then I mute the stereo


I am looking forward to not getting a speed reading on the front of your ride:D

Donut Patrol
04-20-2009, 02:22 PM
Just a suggestion if you are using the Stock alert speaker have it not be muffled and use a mini screwdriver to turn the volume to Max.

Unfortunately at highway speeds with windows down and music up I can't hear my LI alert so I rely on the V1 to give me a laser alert and then I mute the stereo


I am looking forward to not getting a speed reading on the front of your ride:D

I have better pictures of the nose when it was outside, but they are on my other computer which is busying defragmenting. It's definately a stealthy front end, I oil down my plate (so it collects dust), I have very pitted headlights since I drive it in the summer (typically the sun is up), not to mention the collection of dead bugs (they typically show up after being over 80 for a while), and the fact it's grey and black. :D

http://i235.photobucket.com/albums/ee311/MCTosi/128-1-1.jpg

In regards to the alert I'm working on the same logic as you. I'm not even concerned about hearing it, I'll just use my V1 since I already know what all the guns they use around here are (plus I can just see it when I drive by).

crazyVOLVOrob
04-20-2009, 02:27 PM
In regards to the alert I'm working on the same logic as you. I'm not even concerned about hearing it, I'll just use my V1 since I already know what all the guns they use around here are (plus I can just see it when I drive by).
Just make sure you turn off the LI so the guy can get a speed reading. I don't want to hear about Mass Staties seeking JTGer's

th3 factory freak
04-20-2009, 02:45 PM
Okay just finished routing everything, I located my switch, mounted the CPU, connected the heads, and switch (pics to follow later). Now all I have left is to connect it to a power source. Does the glove box light sound like it would work? It's keyable, which I want. Should I piggyback both the power and the ground? Or should I attach the ground somewhere else? Also what are the extra wires on the switch?

You can also solder some extra wire to the power wire and run that to the fuse box.

Make sure you get the right gauge and I would stick with the same color, so if the wire is red, get some red wire.

It's always better to not splice into factory wires.

Donut Patrol
04-20-2009, 03:32 PM
Well I just answered my own question. I pulled the wires out of the socket (for the unused charger) and just quickly connected the LI wires to that. It started up fine, I grabbed the remote (TV) and it went off right away. Looks like I'll just solder that connection, and leave it like that for the time being.

Stealth Stalker
04-20-2009, 03:52 PM
Nice job. Despite my usual scepticism over low head placement, I'm thinking this install might actually perform quite well on this car. I'm looking forward to seeing some test results!

crazyVOLVOrob
04-20-2009, 04:00 PM
Nice job. Despite my usual scepticism over low head placement, I'm thinking this install might actually perform quite well on this car. I'm looking forward to seeing some test results!
Don't worry Rob he doesn't have wrap around headlights so I think we should be good:D

Donut Patrol
04-20-2009, 04:23 PM
Nice job. Despite my usual scepticism over low head placement, I'm thinking this install might actually perform quite well on this car. I'm looking forward to seeing some test results!

Initially I was going to mount in the grill, but then I decided I didn't want to butcher it, not to mention it would have been overly complex to design a mount. Also I know from a very inside source my state targets plates. While it was tempting to keep the heads closer to the plate I tried to split the difference the best I could with the headlights just in case. I still have to work on leveling out the heads, I'm within a few degrees but it's hard to tell since where I'm installing there is an uphill slope.

crazyVOLVOrob
04-20-2009, 05:45 PM
Nice job. Despite my usual scepticism over low head placement, I'm thinking this install might actually perform quite well on this car. I'm looking forward to seeing some test results!

Initially I was going to mount in the grill, but then I decided I didn't want to butcher it, not to mention it would have been overly complex to design a mount. Also I know from a very inside source my state targets plates. While it was tempting to keep the heads closer to the plate I tried to split the difference the best I could with the headlights just in case. I still have to work on leveling out the heads, I'm within a few degrees but it's hard to tell since where I'm installing there is an uphill slope.
Yes they do My BEL v995 has yet to alert to MA State Patrol Laser attack

Stealth Stalker
04-20-2009, 08:34 PM
Yeah, you are wise to resist the temptation to center your heads to protect the plate. The plate is always covered by concentric, overlapping rings of protection from two heads, no matter how wide you mount the heads. But if you move them inboard to concentrate on the plate, you leave your headlights, and everything else north of your grille, dangling in the wind.

Cherokee Driver
04-21-2009, 02:31 PM
Yeah, you are wise to resist the temptation to center your heads to protect the plate. The plate is always covered by concentric, overlapping rings of protection from two heads, no matter how wide you mount the heads. But if you move them inboard to concentrate on the plate, you leave your headlights, and everything else north of your grille, dangling in the wind.

X2


This is what I have been saying all the long....