View Full Version : Single HP LI vs Dual Head - Which to choose?
SpdFreak
04-23-2009, 08:00 PM
Below is a photo of the car.
http://i273.photobucket.com/albums/jj231/SpdFreak1/Mazdaspeed3/LISingleHPvsDaul.jpg
Car: Mazdaspeed3
Will a single head HP LI placed on center (yellow color) JTG, or is a regular dual head package (green color) needed?
The reason I prefer the single HP head, is the simplicity of the install.
Please discuss. Cliff is waiting for my call :D !
IIRC Pmoth installed a single head LI on a Nissan Sentra rental, and got JTG almost every time (except for one sweet spot that he was able to get punch through).
2007 Nissan Sentra specs
Height: 59.5 in.
Width: 70.5 in.
Single-head LI on my rental. Hmmmm... (http://www.radardetector.net/forums/laser-jammers/39086-single-head-li-my-rental-hmmmm.html)
th3 factory freak
04-24-2009, 12:32 AM
I think I'd go with 2 heads, it's a bit more wide spread.
You can always add a 3rd head later.
speed-dreams
04-24-2009, 01:06 AM
2 heads dual will provide JTG performance...
MEM-TEK
04-24-2009, 01:25 AM
A single head could allow punchthroughs at distances closer than 400 feet, quite simply becuase some laser guns have very narrow field-of-view optics. I would definitely get the standard two head model. BTW, the green spots where you are thinking fo installing them looks ideal to me.
:)
SpdFreak
06-11-2009, 01:43 AM
With the install of all interior components done, the jammer head install is next.
For the weekend a temporary mount above the licence plate will have to do. Within the next two weeks a new thread containing photos of the brackets and jammer setup will be completed. Till then, Pmoth's idea of a single head jammer will suffice.
PMoth
06-11-2009, 07:34 AM
LoL. SpdFreak, I sincerely hope that you run into a laser trap this weekend so you can experience the awesomeness first hand. I've said it before and won't hesitate to repeat myself, a properly installed single head standard LI setup will outperform any dual head Led jammer. No cop is going to get lucky unless his name is Fritter. And in all honesty, even if it was Fritter, you'll still have time to slow down.
Don't really know what the h3ll "th3 factory freak" is talking about above. 3 heads:confused: LOL!!! "Speed-Dreams" hit it right on the money. "Mem-Tek" pretty much said the same thing I did in the "Single head" thread you linked in the first post.
SpdFreak, I can guratee you the following statement. A single head LI "may" allow close range PTs on your vehicle if it is installed correctly, but a Zr3/Zr4 "WiLL" allow medium-close range PTs on your vehicle no matter how it's installed. ;)
Stealth Stalker
06-11-2009, 08:00 AM
The officer doesn't have to "get lucky" to pwn a single head set-up. Most of them shoot freehand, meaning they are going to hit a headlight or foglight, and probably before you've slowed down.
We've seen the dual LI HP pwn3d when placement was not ideal. It'll darn sure happen with a single regular head. This is a really bad idea.
crazyVOLVOrob
06-11-2009, 08:13 AM
The officer doesn't have to "get lucky" to pwn a single head set-up. Most of them shoot freehand, meaning they are going to hit a headlight or foglight, and probably before you've slowed down.
Doubt it. From my experience is in states that require front plates cops perfer to aim at the front plate as it will result in an instant lock on the car.
Headlight of foglight locks take a bit longer
Pmoth's single head on a Black Altima resulted in JTG even when aiming at headlight
PMoth
06-11-2009, 08:28 AM
The officer doesn't have to "get lucky" to pwn a single head set-up. Most of them shoot freehand, meaning they are going to hit a headlight or foglight, and probably before you've slowed down.
We've seen the dual LI HP pwn3d when placement was not ideal. It'll darn sure happen with a single regular head. This is a really bad idea.
What? You gotta be kidding me. You've seen a dual LI HP obliterated because it was installed "Incorrectly!!!" Stop trying to butter up the install with "placement was not ideal." Either it was installed wrong or it wasn't working correctly. That's it. You don't seem to have faith in science and logic. I'm a scientific kind of guy and don't just pull statements like the one above out of my @ss. Headlight, foglight, frontplate, it really doesn't matter as long as the LI can detect the lidar gun and the unit is installed "correctly."
PMoth
06-11-2009, 08:32 AM
The officer doesn't have to "get lucky" to pwn a single head set-up. Most of them shoot freehand, meaning they are going to hit a headlight or foglight, and probably before you've slowed down.
Doubt it. From my experience is in states that require front plates cops perfer to aim at the front plate as it will result in an instant lock on the car.
Headlight of foglight locks take a bit longer
Pmoth's single head on a Black Altima resulted in JTG even when aiming at headlight
Thanks for understanding Rob. And don't forget, I wasn't "just" aiming at the headlights. I was trying not to illicit a jamming response from the LI by staying as far away from the receiver as possible.
Stealth Stalker
06-11-2009, 09:01 AM
Doubt it. From my experience is in states that require front plates cops perfer to aim at the front plate as it will result in an instant lock on the car.
It doesn't make the slightest difference what they are aiming at. It is what they actually hit that makes the difference. And when a cop is freehanding, he is going to hit the headlight, whether he is aiming at it or not.
You've seen a dual LI HP obliterated because it was installed "Incorrectly!!!" Stop trying to butter up the install with "placement was not ideal."
I'm not sure what you are trying to prove by playing a word game here. Whether it is "incorrect" or "less than ideal" is nothing but semantics. And it was only one example anyhow, so no need to dwell on it. The fact is that the single-head recommendation you are making here is bad. Not even Cliff would put money on that.
If I could only afford two heads, I'd rather put them both on the front and guarantee that at least one end was covered, rather than to compromise both ends with single head set-ups.
PMoth
06-11-2009, 09:59 AM
Doubt it. From my experience is in states that require front plates cops perfer to aim at the front plate as it will result in an instant lock on the car.
It doesn't make the slightest difference what they are aiming at. It is what they actually hit that makes the difference. And when a cop is freehanding, he is going to hit the headlight, whether he is aiming at it or not.
You've seen a dual LI HP obliterated because it was installed "Incorrectly!!!" Stop trying to butter up the install with "placement was not ideal."
I'm not sure what you are trying to prove by playing a word game here. Whether it is "incorrect" or "less than ideal" is nothing but semantics. And it was only one example anyhow, so no need to dwell on it. The fact is that the single-head recommendation you are making here is bad. Not even Cliff would put money on that.
If I could only afford two heads, I'd rather put them both on the front and guarantee that at least one end was covered, rather than to compromise both ends with single head set-ups.
It's clear that you've failed to realize the point CVR was trying to make. It's clear that you've failed to realize the point that I was trying to make. Both of which were made clearly and effectively. Cliff doesn't have to put money on anything. He only needs to sell the product. If I were the OP I would have my setup tested immediately to confirm the effectiveness of the install. I could care less if he used 1, 2, or 8 heads on the front of the vehicle. Everything I install, I test. Your install is compromised if you don't test it. Again, my statements aren't pulled out of my @ss. They are derived from my own observations based on analyzed data. Data acquired from testing theories that go beyond what is conventional. Experimental installs that other members simply won't do. In case you haven't realized, I don't blindly follow what the majority is doing. I don't live on a square planet. I'm always the star in a room full of circles.
Stealth Stalker
06-11-2009, 10:12 AM
I understand that. I never accused you of pulling anything out of your arse. But I happen to do a whole lot of testing too. Every other month I am travelling to a major meet somewhere to shoot for a full day or two. Not to mention all the trips I make to test individual set-ups every week. With four guns at my daily disposal, I have enough experience at this that I don't need to pull anything out of my arse either. And from that experience, I am saying that I have no faith in a single head set-up on that car.
If SpdFreak is going to get competently tested before putting any faith in the set-up, that's great. Because, as you said, nothing matters except the test results.
SpdFreak
06-12-2009, 12:46 AM
Pmoth's single head on a Black Altima resulted in JTG even when aiming at headlight
You mean a Sentra.
Time will tell if it works.
takeshi
06-13-2009, 10:49 AM
The reason I prefer the single HP head, is the simplicity of the install.
There's a little extra work to mount the second head but once you're running cables there's little difference between 1 and 2.
I'd place my decision-making priority on coverage and not convenience but YMMV.