PDA

View Full Version : Testing photofog



sethy
02-25-2005, 10:21 AM
If I apply this to my license plate, and take a picture of my plate with a digital cam, should I still be able to see my plate in the picture?

Radar Roy
02-25-2005, 09:46 PM
The flash used with the photo radar cameras is on a different light spectrum then the flash on your digital camera. You would need a strobe that has IR spectrum

Flitsservice.nl
03-06-2005, 06:10 AM
I tried photofog. Thing is that with photoradar, with the photo, they can do funny things that will make your licenseplate visible. Only a backflash would work, I think. Photo fog is a big layer of high gloss paint in my opinion and very visible if you have a policecar behind you at night.

On the photofog website is a claim of a test in Holland. They say it was succesfull, but if you look, you can still read it. The Dutch police said that it could work at night, but we have seen what they can do with the equipment used to read the photofilm. They can do anything you can do with good photosoftware.

Veil Guy
03-06-2005, 04:52 PM
Here's a question.

Does the use of highly reflective products serve to hurt laser stealthiness?

The Veil Guy 8)

brick
03-06-2005, 05:02 PM
Not if it reflects the laser directly into the ground or sky. 8)

marlinspike
03-06-2005, 05:08 PM
The Dutch police said that it could work at night, but we have seen what they can do with the equipment used to read the photofilm. They can do anything you can do with good photosoftware.

Are they using film or digital? And are they doing their adjustments on a computer or in development if it's film? If it's digital all they need is something that makes it 16 times brighter than the camera hoped it would be, and even if they are using the best digital cameras there is no chance in heck that they'll get it back If they use film and edit in development instead of on a computer, photofog would have to make it about 600 times brighter than the camera wanted.
Richard

stalker
03-21-2005, 01:59 AM
so if i angled my plate up to the sky or to the ground a little i should be safe from laser??

brick
03-21-2005, 06:27 AM
so if i angled my plate up to the sky or to the ground a little i should be safe from laser??

Now that I've throught about it more I don't think it's quite that simple, mainly because of retroreflective paint. It's designed to reflect light back in the direction from which it came regardless of the orientation of the plate. I think that you would either need to get rid of the retroreflective paint and polish it up with photofog or something like it, or use a license plate cover that reflects IR without reflecting too much visible light as well. In either case this is all very theoretical and I have no idea how it would work in practice. I, for one, would not stake my insurance premium on it without a lot of testing.

nvr2fast
03-29-2005, 08:45 AM
I've tried these "spray on" fixes... the photostopper.

I can tell you first hand, they do not work.

cjs180
03-29-2005, 09:53 AM
What if you left your plate "dirty"? Would that help diminish the laser?

SETITOFF
03-29-2005, 10:05 AM
It could. Depends on how dirty. Excess mud and so forth may get you a warning depending on how strongly LP visibility is enforced.

Veil Guy
03-29-2005, 01:07 PM
You didn't hear this from me...but one could just remove the front plate and take their chances with an equipment violation.

It's still a non-moving violation...

Otherwise, look at other options from your state. Perhaps (like PA) they issue other plate styles that are NOT retro-reflective and darker in colour than a standard state plate.


The Veil Guy 8)

JTW
04-04-2005, 05:49 AM
Okay guys, I have the answer. Actually, Speed Measurement Labs has the answer to this question. I have a video clip that clearly shows all photo radar sprays don't work because they can reverse the image to its negative. The Veil guy is right as well. If you were to put something super reflective on your plate your Blinder or any other laser jammer may not work as well. Do you really want to risk it? If I were you I'd just invest in a photo radar cover, whether it be a Super Protector or the P-CB Pro that we tested.

Want to see the video? Enjoy!

http://www.laserjammer.citymax.com/f/photo_blocker_stopper_photoblocker_phantomplate_ra dar_spray_review_fails_test.wmv

Chris

www.laserjammertests.com

JTW
04-04-2005, 05:56 AM
Using a digital camera simply won't work when you test these sprays. Why? For one thing photo radar uses a flash bulb that is 50 to 400 mW! This is at least 10X the flash power of your digital camera. If you really want to test it go to a professional camera shop, buy a 50mW slave bulb and then test it out. Radar Roy is correct on one point. Some photo radar units use IR light, instead of white light. The white light is used on the older systems. Stick with a refractive cover if you want protection that won't be outdated. Don't buy any countermeasure that uses reflection. Overexposing a plate is not a safe alternative anymore in my opinion.

More information on photo radar specifications can be found on the national motorists website.

[/url]http://www.motorists.com/issues/enforce/PhotoRadarTechInfo.html

Chris

www.laserjammertests.com