View Full Version : ZR4's Weak No More!
category4
05-17-2009, 07:57 PM
I am one of the few people in the world that own a set of the MEM-TEK modified ZR4's.
MEM-TEK was kind enough to come down today and make some modifications to the ZR4's on the Vette. In a quick testing after the mod's the front was JTG against the PL3 and TruSpeed. The Truspeed was able to get PT's on the rear out to about 300' when the outside taillight was targeted and JFG on center mass targeting.
It's an incredible change in performance. I feel 100% certain the ZR4's will protect me should the need arise.
MEM-TEK a special thank you for making the trip down and for spending the enormous about of time I certain it took to come up with these modifications. I am looking forward to our next Jammerfest so we will have documented results on how well these perform.
axel_ny
05-17-2009, 08:57 PM
can be mod zr3 too?
partsfreak
05-17-2009, 08:59 PM
Another fine save by Captain Insano:)
MEM-TEK what is it that you did to make them more powerful? Is it the heads or the control module that you tweaked?
Can you do the same mod to ZR3's?
category4
05-17-2009, 08:59 PM
MEM-TEK would have to answer that. He did mine and one other set so he will have some other units out there to do some testing with.
All I can say is the difference is incredible!
partsfreak
05-17-2009, 09:01 PM
For some reason I thought you had LI. Maybe thats overkill for your ride.:cool:
category4
05-17-2009, 09:06 PM
I have LI's and ZR4's. The ZR4's were part of the 9500ci. Before the ZR4 mods I just ran them in receive only mode.
I'm looking forward to doing some more testing to see how good the ZR4's now are. The initial test results from today were spectacular, but admittedly none of us are Rsatmans with a lidar gun.
partsfreak
05-17-2009, 09:15 PM
Well at least you are not that far from FL where it seems a bunch of the RD forum guys reside. You could make a trip down there and do some testing:) (and fishing)
Keep us posted.:thumb2:
category4
05-17-2009, 09:21 PM
We have a test here in the Atlanta area scheduled in the next 30 days. We will have some results to compare from our last test session.
REBinc
05-17-2009, 09:57 PM
Is there a how to on this mod?
Lucky225
05-17-2009, 09:59 PM
Is there a how to on this mod?
x2 already!
category4
05-17-2009, 10:02 PM
Is there a how to on this mod?
Only MEM can answer that question. All I can say is it is time consuming and not something the average person would probably be able to accomplish.
But from seeing your work I would say it's within your capabilities.
Lucky225
05-17-2009, 10:03 PM
Is there a how to on this mod?
Only MEM can answer that question. All I can say is it is time consuming and not something the average person would probably be able to accomplish.
But from seeing your work I would say it's within your capabilities.
=X
BlinderGuy
05-17-2009, 10:06 PM
Replace the LEDs with more high power ones.;)
category4
05-17-2009, 10:09 PM
Replace the LEDs with more high power ones.;)
Are you telling us what's in the Blinder Top Secret?:D
BlinderGuy
05-17-2009, 10:10 PM
:popcorn:
category4
05-17-2009, 10:12 PM
Replace the LEDs with more high power ones.;)
Only MEM can tell you what was modified, but it was more than one mod.
Lucky225
05-17-2009, 10:12 PM
Replace the LEDs with more high power ones.;)
only issue with that is the same voltage is hitting the circuit board, so not exactly sure the high power led's would be on the same operating voltage.
djrams80
05-17-2009, 10:26 PM
I'm curious to know how it does against the Stalker, post-mod.
Cat4, great to hang out with you guys today - see you in a few weeks at the testing. :)
BlinderGuy
05-17-2009, 11:03 PM
Replace the LEDs with more high power ones.;)
only issue with that is the same voltage is hitting the circuit board, so not exactly sure the high power led's would be on the same operating voltage.
Nobody said anything about it being the same voltage.
DrCoke
05-18-2009, 12:11 AM
A special ZR-4 should be sent to the next GOL meeting. I cant wait for GOL 2009 since it seems like so much has changed since a year ago. We got new blinders and possible modded ZR-4 trying to compete with the LI king and new lidar guns in the market. Hell, i'll let GOL use my ZR-4 if MEM mods them.
A special ZR-4 should be sent to the next GOL meeting. I cant wait for GOL 2009 since it seems like so much has changed since a year ago. We got new blinders and possible modded ZR-4 trying to compete with the LI king and new lidar guns in the market. Hell, i'll let GOL use my ZR-4 if MEM mods them.
LI has competition at this point, imo. I'll reserve saying that MEM-TEKs are better until more thorough testing, but they're that good.
partsfreak
05-18-2009, 07:08 AM
:popcorn::popcorn::lol:
Replace the LEDs with more high power ones.;)
Are you telling us what's in the Blinder Top Secret?:D
kpatz
05-18-2009, 07:31 AM
I'm curious too as to what this mod entails. I'm fairly proficient in electronics and could probably do the mod myself if I had the know-how, and a ZR4 of course.
I've been eyeing the LI for some time now, but if I could get great performance out of a less expensive jammer sold by Radarbusters I would certainly consider going that route.
Maybe MEM-TEK could be employed by Escort to design the ZR5. ;)
Maybe MEM-TEK could be employed by Escort to design the ZR5. ;)
IMO, MEM-TEK should make his own jammer - why should he make money for Escort or any other jammer company out there?
category4
05-18-2009, 10:51 AM
I'm curious too as to what this mod entails. I'm fairly proficient in electronics and could probably do the mod myself if I had the know-how, and a ZR4 of course.
I've been eyeing the LI for some time now, but if I could get great performance out of a less expensive jammer sold by Radarbusters I would certainly consider going that route.
Maybe MEM-TEK could be employed by Escort to design the ZR5. ;)
From what I have seen Escort could learn a thing or two from MEM-TEK.
DrCoke
05-18-2009, 11:41 AM
Humm.. MEM-TEK making his own jammer? Would I buy a new jammer from a guy who played with just about every radar/jammer in the market? Who knows the ins/outs of radar guns and jammers? Who im sure will help anyone (except BMW owners) with install, RMA, and question? You bet i will. MEM-TEK should not release or say anything regarding modd ZR-4 until its independently tested and shows escort the before/after results. If its that good, Escort should pay for his idea for the updated zr4 or new zr5.
category4
05-18-2009, 01:08 PM
Humm.. MEM-TEK making his own jammer? Would I buy a new jammer from a guy who played with just about every radar/jammer in the market? Who knows the ins/outs of radar guns and jammers? Who im sure will help anyone (except BMW owners) with install, RMA, and question? You bet i will. MEM-TEK should not release or say anything regarding modd ZR-4 until its independently tested and shows escort the before/after results. If its that good, Escort should pay for his idea for the updated zr4 or new zr5.
X2!
Lucky225
05-18-2009, 01:22 PM
Replace the LEDs with more high power ones.;)
only issue with that is the same voltage is hitting the circuit board, so not exactly sure the high power led's would be on the same operating voltage.
Nobody said anything about it being the same voltage.
Kind of my point, you can't do the mod if the ZR4s led's operating voltage is say 3v, and high power LEDs require 5v, you would need to modify the heads to spit out 5v in addition to soldering on some new LEDs
TSi+WRX
05-18-2009, 01:47 PM
IMO, MEM-TEK should make his own jammer - why should he make money for Escort or any other jammer company out there?
I'd buy one.
Given how dog-eat-dog (in the WORST possible sense of the words' connotations) the countermeasures industry is, I'd fear for MEM-TEK, but in other hobby communities/societies, this is very common practice, and such modified products, if of high quality and performance, truly are held in high esteem.
Look at that of the custom/semi-custom knives.
Emerson's products, in-particular, have a huge following of hobbyist custom-workers and hobbyist-knifesmiths. Even Mr. Emerson himself regards some of those hobbyists' work as improvements upon his own production-line items.
Two of my EDC Emersons are lovingly modified just by such a hobbyist, an active LEO, SWAT member, and his department's knife-arts instructor.
I'd be proud to say that I own something modified by one of our own, particularly someone like MEM-TEK. :)
Lucky225
05-18-2009, 02:56 PM
IMO, MEM-TEK should make his own jammer - why should he make money for Escort or any other jammer company out there?
I'd buy one.
Given how dog-eat-dog (in the WORST possible sense of the words' connotations) the countermeasures industry is, I'd fear for MEM-TEK, but in other hobby communities/societies, this is very common practice, and such modified products, if of high quality and performance, truly are held in high esteem.
Look at that of the custom/semi-custom knives.
Emerson's products, in-particular, have a huge following of hobbyist custom-workers and hobbyist-knifesmiths. Even Mr. Emerson himself regards some of those hobbyists' work as improvements upon his own production-line items.
Two of my EDC Emersons are lovingly modified just by such a hobbyist, an active LEO, SWAT member, and his department's knife-arts instructor.
I'd be proud to say that I own something modified by one of our own, particularly someone like MEM-TEK. :)
x2, even cb's need to be tweaked and peaked ;)
category4
05-18-2009, 03:03 PM
These are definitely peaked and tweaked!
Is there a how to on this mod?
Only MEM can answer that question. All I can say is it is time consuming and not something the average person would probably be able to accomplish.
Oh.
Yeah...I'm not too good at reversing the polarity on the flux capacitor.
kpatz
05-19-2009, 10:16 AM
Yeah...I'm not too good at reversing the polarity on the flux capacitor.I wouldn't attempt doing that yourself. 1.21 jigawatts can pack quite a sting if you forget to cut the power to the plutonium generator (or Mr. Fusion) before you crack the cover on the flux capacitor.
Also, you have to make sure your flux capacitor isn't an electrolytic or tantalum type, as they are polarized, and don't take well to having their polarity reversed. You might end up stuck in 1955, and then you'd have to find yourself a S-band radar detector. :rolleyes:
MEM-TEK
05-19-2009, 11:09 AM
Absolutely. Just make sure that you have an old but working Fuzzbuster S and X band detector right next to you before you get thrown back to 1955 after trying to mess with the flux capacitor. And be sure that you have your Blackberry with you -- preloaded with stock market data for the last 54 years. And, if you are the entrepraneurial type, be sure to have $2 packs of NPN and PNP transistors with you too. You could make a killing in the electronics industry!
partsfreak
05-19-2009, 12:10 PM
UM..... I LIKE TATER TOTS:crazy_pilot:
springadv
05-19-2009, 03:09 PM
So, OK - How to get MEM-TEK to do mods for some of the rest of us ?? :cool::)
Fastgt2003
05-19-2009, 03:26 PM
..Mod mY zr3333333333 :)
category4
05-19-2009, 06:48 PM
So, OK - How to get MEM-TEK to do mods for some of the rest of us ?? :cool::)
MEM said if Escort does not show any interest in it he may post the changes out for the public domain.
HWho im sure will help anyone (except BMW owners) with install, RMA, and question?
I guess he made an exception for me. :)
MEM-TEK
05-19-2009, 10:22 PM
HWho im sure will help anyone (except BMW owners) with install, RMA, and question?
I guess he made an exception for me. :)
Well, after pulling my fingernails out of your car's dash, I figured that your need was great. Have my palm prints faded away yet? :D
HWho im sure will help anyone (except BMW owners) with install, RMA, and question?
I guess he made an exception for me. :)
Well, after pulling my fingernails out of your car's dash, I figured that your need was great. Have my palm prints faded away yet? :D
The need is indeed great. Palm prints have begun fading. Just be glad it wasn't a face print! :D
I think Brad the Mad fell asleep while I was driving. It was way too boring for him...
focalcivic
05-20-2009, 01:28 PM
I heard the mods were not that complicated, a few rubber bands, a paper clip, and just the right amount of spit.
kpatz
05-20-2009, 02:10 PM
I heard the mods were not that complicated, a few rubber bands, a paper clip, and just the right amount of spit.Duct tape... you need duct tape too...
MEM-TEK
05-20-2009, 02:45 PM
And contact cement so that the extra internal parts don't rattle around.
category4
05-20-2009, 02:51 PM
I heard the mods were not that complicated, a few rubber bands, a paper clip, and just the right amount of spit.
They looked easy when MEM-TEK was doing them. I was not worried tell he asked for a shot of Vodka in an 8 oz glass!!!!:eek:
MEM-TEK
05-20-2009, 02:55 PM
I did not specify the glass size. :D
I did not specify the glass size. :D
This is true. I did give him a choice of vodka brands, though. :)
corkguykev
05-20-2009, 03:33 PM
I heard the mods were not that complicated, a few rubber bands, a paper clip, and just the right amount of spit.Duct tape... you need duct tape too...
And contact cement so that the extra internal parts don't rattle around.
A Swiss army knife would come in handy also...
YouTube - MacGyver
:D:D:D
category4
05-20-2009, 03:47 PM
I did not specify the glass size. :D
This is true. I did give him a choice of vodka brands, though. :)
Yes and it was a crucial component.:D
MEM-TEK
05-20-2009, 04:17 PM
Did you know that, in a pinch, you can run jet aircraft engines on vodka?
trailtow
05-20-2009, 04:46 PM
that would be a lot of vodka
FoolishOne
05-20-2009, 04:51 PM
Did you know that, in a pinch, you can run jet aircraft engines on vodka?
In a pinch? You are either in the air or on the ground. You are not pouring a bottle of vodka down the filler neck in the air. So, you must be in a pinch on the ground.
But wouldn't you want to drink the vodka and wait for fuel than poor in the jet?
Stealth Stalker
05-20-2009, 07:36 PM
Did you know that, in a pinch, you can run jet aircraft engines on vodka?
For that matter, in a pinch you can drink JP8. :D
partsfreak
05-20-2009, 07:55 PM
Hell if you want to mod my Zr3'S Ill park the bar cart next to your work bench and rent you a hot loose flight attendant:D
category4
05-20-2009, 07:56 PM
Hell if you want to mod my Zr3'S Ill park the bar cart next to your work bench and rent you a hot loose flight attendant:D
That might work!!!
Stealth Stalker
05-20-2009, 07:59 PM
Although not quite as good as the old days, before the age and weight restrictions were dropped, flight attendants are still yummy.
Flight attendants > nurses
MEM-TEK
05-20-2009, 08:05 PM
I think that I will pass on the loose flight attendant. I plan to leave this life with exactly the same number of STD's which I was born with -- zero.
trailtow
05-20-2009, 08:11 PM
I think that I will pass on the loose flight attendant. I plan to leave this life with exactly the same number of STD's which I was born with -- zero.
:lol::lol::lol:
category4
05-20-2009, 08:12 PM
I think that I will pass on the loose flight attendant. I plan to leave this life with exactly the same number of STD's which I was born with -- zero.
What about the bar? After a few shots you might change your mind!:D
FoolishOne
05-20-2009, 08:13 PM
Why risk it MEM-TEK, be a virgin for life! :lol:
category4
05-20-2009, 08:15 PM
:lol::lol::lol:
Why risk it MEM-TEK, be a virgin for life! :lol:
partsfreak
05-20-2009, 08:18 PM
K then how about the big bottle of grey goose with a handle on it and a fried bologna sammich?:beer::eating::dontknow::lol:
MEM-TEK
05-20-2009, 08:18 PM
What about the bar? After a few shots you might change your mind!:D
That has happened more times than I care to remember. :D
partsfreak
05-20-2009, 08:45 PM
What about the bar? After a few shots you might change your mind!:D
That has happened more times than I care to remember. :D
That is the other tense for "Booze it & lose it";)
Fastgt2003
05-22-2009, 06:49 PM
I think that I will pass on the loose flight attendant. I plan to leave this life with exactly the same number of STD's which I was born with -- zero.
Ohhhhh my Std's are just gifts that keep giving back :lol::lol::lol:
geekmedic
05-22-2009, 10:07 PM
Ohhhhh my Std's are just gifts that keep giving back :lol::lol::lol:
Nothing a little bug juice can't cure... or at least that's how my patients think. I still can't figure out why people come to the ER for their STD's.
MEM-TEK
05-22-2009, 11:58 PM
I still can't figure out why people come to the ER for their STD's.
I dunno. Maybe to nip it in the bud as quickly as possible before their wife, hubby, GF or BF finds out that they were unfaithful?
Fastgt2003
05-23-2009, 01:08 AM
I still can't figure out why people come to the ER for their STD's.
I dunno. Maybe to nip it in the bud as quickly as possible before their wife, hubby, GF or BF finds out that they were unfaithful?
hahah sounds like A great plan for a ER run
geekmedic
05-23-2009, 02:25 AM
I dunno. Maybe to nip it in the bud as quickly as possible before their wife, hubby, GF or BF finds out that they were unfaithful?
As if the $750 bill coming in the mail doesn't tip them off? My hospital is pretty aggressive about collecting its debt, including turning things over to a collection agency. This can easily be handled with a $35 visit to a primary doc or a free visit to the health department.