PDA

View Full Version : how do Z4's display in 9500 ix?



willyusa
05-27-2009, 10:36 PM
When you startup the RD, does it just identify the Z3 as "shifters"? I thought I read somewhere that it would actually say Z4 or Z3, but my Z4 just shows as "shifters". I know they work because I used a remote and it made the RD give the alarm and show "front shftrs" and "rear shiftrs" but wondering if all is OK....

:confused:

REBinc
05-27-2009, 10:42 PM
Do you mean ZR3 and ZR4, or are you mount bimmers to your front bumper?

willyusa
05-27-2009, 10:45 PM
HAhahahah yes...ZR3's and ZR4's...it's been a long day.....

REBinc
05-27-2009, 10:48 PM
I believe it will look like my sig, saying F LASER or R LASER alternating with SHIFTING. When it turns on, I think it should just say SFT ON.

Fastgt2003
05-27-2009, 11:23 PM
mmm sounds like it works good but you never know till you get to use a lidar gun keep the heads level!!!!!!!! And clean

grasshopper
06-03-2009, 08:18 PM
I believe it will look like my sig, saying F LASER or R LASER alternating with SHIFTING. When it turns on, I think it should just say SFT ON.
x2 i have the 9500ix with the zr3 and it says F LASER shifting or R LASER shifting... the control module for the zr3 does not light up or make a sound at all... it goes directly to the RD and tells you their

Qui-Gon
06-11-2009, 07:17 PM
Possibly somewhat related...

I just hooked up my STi Driver to the ZR4, and my STi recognizes the ZR4 as a LaserPro 904 (display shows LP904 BLK, LP904 REC, LP904 OFF in Program Mode) as a separate section, where the manual says to go to the LASER option. Haven't had a LIDAR hit yet, so I'm not sure how that will show up on my STi.

DrCoke
06-11-2009, 07:30 PM
Get your collection of TV remotes and starting tapping the buttons 1 feet away from the zr4s.

MEM-TEK
06-11-2009, 07:47 PM
Sometimes IR remotes are too powerful at only 1 foot away. You may have to try distances up to around 6 feet.