View Full Version : Recieve side of Zr4 head
BlinderGuy
05-30-2009, 08:37 AM
How do you know which side of the Zr4 head is the receive side...They both look alike and both say this side up..How do you know which is left and which is right for receive purposes?
MEM-TEK
05-30-2009, 10:16 AM
Internally, both front ZR4 heads are identical. Looking at the heads from the front, the left side is the receive portion and the rest is the emitter portion. You can hold the heads up to a desk lamp such that the lamp is shining into the tops of the heads, and then you should be able to see the shielded receive side and to the right of that the row of eight IR emitting LEDs.
:)
P.S. On my modified ZR4's you won't be able to easily see the receive side since the RF shield over the receive electronics now is black rather than bare metal.
BlinderGuy
05-30-2009, 10:26 AM
That puts receive side both on the left and the heads are marked this side up...Is it ok to flip the Z head one upside down to make the receivers to the right for the right headlight
MEM-TEK
05-30-2009, 10:48 AM
Prefer that you didn't since the circuit board shields the emitter LEDs from shining down onto the pavement directly in front of the vehicle. Flipping the head may cause the pavement to be illuminated, creating feedback into the receive.
shira9
05-30-2009, 01:22 PM
Internally, both front ZR4 heads are identical. Looking at the heads from the front, the left side is the receive portion and the rest is the emitter portion. You can hold the heads up to a desk lamp such that the lamp is shining into the tops of the heads, and then you should be able to see the shielded receive side and to the right of that the row of eight IR emitting LEDs.
:)
P.S. On my modified ZR4's you won't be able to easily see the receive side since the RF shield over the receive electronics now is black rather than bare metal.
When you write, "On my modified ZR4's you won't be able to . . .," are you implying that you're going to start doing your ZR4-mod as a business?
BlinderGuy
05-30-2009, 01:30 PM
Internally, both front ZR4 heads are identical. Looking at the heads from the front, the left side is the receive portion and the rest is the emitter portion. You can hold the heads up to a desk lamp such that the lamp is shining into the tops of the heads, and then you should be able to see the shielded receive side and to the right of that the row of eight IR emitting LEDs.
:)
P.S. On my modified ZR4's you won't be able to easily see the receive side since the RF shield over the receive electronics now is black rather than bare metal.
When you write, "On my modified ZR4's you won't be able to . . .," are you implying that you're going to start doing your ZR4-mod as a business?
As great as the MOD is the only down side I see is warranty....If you send it in for warranty I would think they would notice mods and not warranty the heads.
MEM-TEK
05-30-2009, 01:47 PM
I am not going to start a business modifying ZR4's.
Lucky225
05-30-2009, 03:18 PM
Internally, both front ZR4 heads are identical. Looking at the heads from the front, the left side is the receive portion and the rest is the emitter portion. You can hold the heads up to a desk lamp such that the lamp is shining into the tops of the heads, and then you should be able to see the shielded receive side and to the right of that the row of eight IR emitting LEDs.
:)
P.S. On my modified ZR4's you won't be able to easily see the receive side since the RF shield over the receive electronics now is black rather than bare metal.
When you write, "On my modified ZR4's you won't be able to . . .," are you implying that you're going to start doing your ZR4-mod as a business?
As great as the MOD is the only down side I see is warranty....If you send it in for warranty I would think they would notice mods and not warranty the heads.
I'd still take advantage of the mod, this guy blinder-guy is pretty cool about products still in warranty :D