View Full Version : A question for all ZR4 owners...
Qui-Gon
06-06-2009, 11:55 PM
As I will be receiving my ZR4 later this week, I had a quick question for everyone that has received a laser hit with the ZR4. How long does a laser alert last on the ZR4? Is it like my STi, which takes several seconds to cycle after receiving an alert? Does the alert stop as soon as the trigger is released on the officer's gun? Thanks in advance!
DrCoke
06-06-2009, 11:58 PM
if i had to guess, 3-5 seconds for every lidar hit.
BlinderGuy
06-07-2009, 06:34 AM
if i had to guess, 3-5 seconds for every lidar hit.
When I tested mine yestersday at Atlanta meet it seemed to react rather quick once the car was not targeted. I had the LI and the Zr4 up front and was untouchable. My Zr4 reacted quicker on alerts then the LI...I know the LI starts jamming right away but the Zr4 was quicker to alert even with the voice announcement but both together the are a great pair. The LI jams well and the Zr4 gives front and rear alerts...My car is hard to protect because the headlights are so big and the car is very wide...I drive a 2004 Pontiac Grand Prix.
The rear targeting was still a joke anywhere but the plate so I will probably put 2 M27 heads in the rear with the Zr4.
Overall the Zr4 is quick to respond!!! You made a good choice. My set up is not good for actually testing performance because the way I have them mounted. I have them mounted about 6" apart in center grill to cover CM shots..Although they did protect my headlights to a good degree..My LI is mounted low and directly under my headlights to protect the lights and side markers. I was going to put the LI in rear and and M27 in its place but category4 said why go through the trouble of switching 2 sets of jammers instead of just mounting one in the rear....I agree!!
Sorry, I know this is a little more info than you where looking for.
snoopyc4
06-07-2009, 11:02 AM
About 3 seconds. My V1 alerts first before my 9500ci.
MEM-TEK
06-07-2009, 12:13 PM
I have a few tips regarding stock ZR4 installations which will make them perform quite well:
1. Remove your car's front bumper so that you can spray paint everything behind the front bumper flat black. Flat black Rustoleum bare metal primer seems to adhere by far the best to all unprepped metal surfaces. Note that on some vehicles you may have to remote the headlight assemblies in order to access a few screws that have to be removed in order to remove the front bumper.
2. ZR4 heads must NOT be recessed -- at all! They should be mounted such that they stick out at least 1/4".
3. After you mount your ZR4 heads, apply black electrical tape atop of the heads. Tape atop the heads is all that is necessary since the internal circuit board prevents IR from escaping through the bottom of the heads. This prevents emitted IR from the heads from reflecting off of any shiny surface above the heads and possibly feeding back into the ZR4's detectors. Technically, you could simply mask off the fronts of the heads and then spray paint the rest of the heads flat black, but that probably will void the warranty.
4. The rear ZR4 head should be wrapped with one full wrap of black electrical tape.
In other words, just a few simple and basic modifications which you can do, aside from my special internal modifications or other modifications which void the ZR4's warranty, which will make the ZR4's perform significantly better.
For example, wrapping the stock ZR4 front heads with electrical tape yesterday allowed the front stock ZR4's on my gold colored car to successfully JTG the Truespeed! Nope, I do not have any Veil on my car, but I previously spray painted everything behind my car's grille flat black, and I do have the ZR4 front heads mounted in ideal locations.
CJR238
06-07-2009, 12:29 PM
For example, wrapping the stock ZR4 front heads with electrical tape yesterday allowed the front stock ZR4's on my gold colored car to successfully JTG the Truespeed!
I thought the ci rocked with the Truespeed already?
MEM-TEK
06-07-2009, 01:07 PM
No, that was the ZR4's deadly gun at SML 2008.
CJR238
06-07-2009, 01:10 PM
No, that was the ZR4's deadly gun at SML 2008.
so the ci sucks with TrueSpeed?
BlinderGuy
06-07-2009, 01:20 PM
I wouldn't say it sucks but struggles.
djrams80
06-07-2009, 01:22 PM
My 9500ci JTGs the TruSpeed all day!
http://www.radardetector.net/forums/laser-jammers/43968-more-laser-jammer-testing.html
TheBreeze's 9500ci also did very well against the TruSpeed and he has a Challenger with no Veil on his car.
http://www.radardetector.net/forums/detector-counter-measure-reviews/44311-li-testing-review.html
CJR238
06-07-2009, 01:32 PM
My 9500ci JTGs the TruSpeed all day!
http://www.radardetector.net/forums/laser-jammers/43968-more-laser-jammer-testing.html
TheBreeze's 9500ci also did very well against the TruSpeed and he has a Challenger with no Veil on his car.
http://www.radardetector.net/forums/detector-counter-measure-reviews/44311-li-testing-review.html
That's what i thought, the ci did well with Truespeed.
MEM-TEK
06-07-2009, 01:38 PM
I wouldn't say it sucks but struggles.
Yep, and just a few tweaks like I mentioned, and the ZR4 does extremely well against the Truespeed.
Qui-Gon
06-07-2009, 05:04 PM
DJ had suggested to me previously that I should spraypaint the heat exchanger with a light coat of flat black spraypaint, which I have already done. The way my grille is curved...having the front heads sticking out is not going to be a problem. I have started the install process already (OK, I'm prepping right now for my new arrival) by cutting my grille to fit the front heads, using the measurements given in the owner's manual. I will post my install (in process and fully completed) in the appropriate section once completed!!!
Fastgt2003
06-07-2009, 07:07 PM
My zr3's JTG on truspeed video will be posted later :D
Without Veil so :p