View Full Version : LI Customer Service
hippocrates
06-14-2009, 08:31 PM
I bought and had professionally installed a quad LI on my car last week. At the same time I had a CB/9500 ci installed. I got the car back on Friday afternoon. Drove it for the afternoon, LI working well with normal start-up. I keyed my microphone on the CB while checking SWR and I think it may have blown my LI speaker out b/c I lost LI output (internal and external) later in the day (couldn't here it on next start-up). It could have blown independently (I am going to check with installer on Monday on wiring).
So, needless to say, I was moderately frustrated on Friday night that my new LI was blown shortly after I drove it from installer. So I emailed Cliff with LI and gave my situation (said that I couldn't hear output from LI but I can see heads firing with digital camera). I asked him in the email what my options were.
He called me in 10 minutes on Friday night at 8 p.m. and offered to meet me halfway between my house and his (I live in Tampa, he lives somewhere north of here) with a new LI CPU that he would setup immediately for me. I don't know him well, but we met once at a CFL meet. He met me that night, we put the new CPU in, and I was good to go (although I'm leaving CB off for now).
So, here's a big thank you to the most responsive customer service I've had from any company or person.
mrcllusb
06-15-2009, 01:13 AM
I tell ya Cliff gives top notch service.We should have a big RD.Net beer party in his name :D.
bockr
06-15-2009, 01:51 AM
Yeah that's great customer service the priority mail he uses is quick as well I got my replacement head within two days and free shipping it doesn't ge better than what happened to you.
Stealth Stalker
06-15-2009, 07:19 AM
Ditto. I had the same problem that hippocrates had. While doing wiring in my car, I got a power surge that erased my voice alerts. Cliff doesn't care what happened or how it happened; he's going to overnight you a replacement immediately and worry about what happened later. His primary concern is getting you back on the road, no questions asked. You cannot possibly ask for better customer service than that.
TSi+WRX
06-15-2009, 08:40 AM
Cliff's C/S is nothing short of simply amazing.
:)
Governator
06-15-2009, 03:57 PM
Cliff's C/S is nothing short of simply amazing.
:)Yeah I just purchased a slim sensor for the rear of my ride today and I must say he's provided the best CS I've ever experienced, a total class act :cool:
I had a similar experience with my LI turning it off and then back on one day. Sent an email to Cliff and he sent me a replacement out the next day with no questions asked.
Not too many companies stand behind their product like that anymore these days.
Thanks again Cliff!
Hessen
06-16-2009, 09:57 AM
Cliff is # 1
Doc What, son?
06-16-2009, 12:29 PM
Cliff walks the talk. I mean walks the walk. I mean, he's a walkie talkie...
Seriously, he stepped in with LI, a while back, and has done what he said he would. Exemplary customer service is all I ever hear about the guy!
newkid
06-16-2009, 01:36 PM
:beer: party for cliff... I'm in :D
Hessen
06-16-2009, 02:10 PM
When LPP's super shill Mr Tactical reads this thread he's gonna lose what's left of his mind.......................:lol:
th3 factory freak
06-16-2009, 02:37 PM
Cliff = Outstanding. (products and services)
category4
06-16-2009, 06:57 PM
Cliff is the man, no question about that. I'm in for the party too!!!
I wish every company provided customer service like Cliff. Makes it really easy to recommend him to someone because you know he's going to take care of them.
happya$$
06-16-2009, 09:14 PM
I bought and had professionally installed a quad LI on my car last week. At the same time I had a CB/9500 ci installed. I got the car back on Friday afternoon. Drove it for the afternoon, LI working well with normal start-up. I keyed my microphone on the CB while checking SWR and I think it may have blown my LI speaker out b/c I lost LI output (internal and external) later in the day (couldn't here it on next start-up). It could have blown independently (I am going to check with installer on Monday on wiring).
So, needless to say, I was moderately frustrated on Friday night that my new LI was blown shortly after I drove it from installer. So I emailed Cliff with LI and gave my situation (said that I couldn't hear output from LI but I can see heads firing with digital camera). I asked him in the email what my options were.
He called me in 10 minutes on Friday night at 8 p.m. and offered to meet me halfway between my house and his (I live in Tampa, he lives somewhere north of here) with a new LI CPU that he would setup immediately for me. I don't know him well, but we met once at a CFL meet. He met me that night, we put the new CPU in, and I was good to go (although I'm leaving CB off for now).
So, here's a big thank you to the most responsive customer service I've had from any company or person.
Cliff defines customer service
Donut Patrol
06-16-2009, 10:18 PM
It's great to finally have a great product, that has equally great customer service. I had a faulty head, and even though I didn't need it right away (still haven't had time to install it, and if you've seen my videos one head seems to work quite well :D) within a day Cliff had a new one on the way.
Zapple
06-16-2009, 10:31 PM
All these stories are amazing. Good job Cliff!
crease-guard
06-16-2009, 11:24 PM
Cudos to Cliff, makes me that much more confident in my purchase.
However, I was wondering if anyone figured out what was up with the output going tits up in the first place? I'm doing my reading and getting ready to do my install and want to use an external speaker as I want to mount my CPU box in the back of the car but want the audio in the front. I was looking at the manual and it states to use a 16-32 ohm speaker. That's an odd impedance for a speaker. I popped open the CPU box and it's speaker is an 8 ohm one and that's a little more "standard" impedance.
Has anyone mounted an external speaker and if so what kind?
Jay
Stealth Stalker
06-16-2009, 11:31 PM
However, I was wondering if anyone figured out what was up with the output going tits up in the first place?
It's not the output that goes out. The audio files are user modifiable. You can upload your own sounds to the LI to use, if you like. And when the LI is updated with new guns, etc... the new gun ID is easily added. The downside to having modifiable files is that they must therefore exist on a volatile memory. That means they are susceptible to things like power surges. In the cases that I am aware of, it was always something resulting in a power surge that fried the files. The jammer itself is unaffected. You just lose your voice alerts. It doesn't have anything to do with audio output or the speakers.
The LI is the only jammer with voice alerts and gun IDs, so the problem is specific to the LI. You can't scramble a piezoelectric buzzer with a power surge.
rsatmans
06-16-2009, 11:40 PM
Cliff leads the way when it comes to customer service. I can not say enough about how great he is.
crease-guard
06-17-2009, 12:20 AM
However, I was wondering if anyone figured out what was up with the output going tits up in the first place?
It's not the output that goes out. The audio files are user modifiable. You can upload your own sounds to the LI to use, if you like. And when the LI is updated with new guns, etc... the new gun ID is easily added. The downside to having modifiable files is that they must therefore exist on a volatile memory. That means they are susceptible to things like power surges. In the cases that I am aware of, it was always something resulting in a power surge that fried the files. The jammer itself is unaffected. You just lose your voice alerts. It doesn't have anything to do with audio output or the speakers.
The LI is the only jammer with voice alerts and gun IDs, so the problem is specific to the LI. You can't scramble a piezoelectric buzzer with a power surge.
Ah-ha...I did not know that about the user modifiable audio files. That's a nice feature.
Me thinks I might add a diode circuit to prevent surges.
Jay
Laser-InterceptorUSA
06-17-2009, 07:06 AM
Please note that the audio files used in the LI are not the common MP3 or WAV files but rather are PCM (Pulse Code Modulation) files and as such, must be configured that way for the LI CPU to properly execute them during any upload.
Cliff - LI-USA/LI-UK/LI-Canada
crease-guard
06-17-2009, 12:50 PM
Thanks Cliff, that's good to know.
On the web site, the software states up to version 7.10 but the latest version is the 7.11...is there a newer software version for the 7.11 or can the software for the 7.10 version be used?
jay
Laser-InterceptorUSA
06-17-2009, 12:54 PM
Check the Website again. ;)
Cliff - LI-USA/LI-UK/LI-Canada
crease-guard
06-18-2009, 01:43 AM
Got it.
Thanks
Jay
Laser-InterceptorUSA
06-18-2009, 01:59 AM
My pleasure! :)
Cliff - LI-USA/LI-UK/LI-Canada
sonny03106
06-18-2009, 01:00 PM
OH. So he does this for EVERYONE and their uncles. I suddenly dont fee so especial anymore :laugh:
2007m3
06-19-2009, 04:45 PM
Super Fast shipping on my Li.. Only took 2 days to get here. Can't wait to install this weekend (hopefully weather holds up). I love buying my own fathers day present :) thanks again cliff
category4
06-19-2009, 07:41 PM
Yes my new HP LI's arrived today safe and sound. Now all I need is some time off to install them.
brettzo
06-20-2009, 12:32 PM
I emailed Cliff the other day for this first time regarding a couple of questions I had about his product. The response time was very good (within 10 hours) and I sent the email in the evening. His response was through and very helpful.
Customer service to me is just as important to the product itself. I'll be ordering the LI dual kit in a couple of months when I purchase my new vehicle, thanks to Cliff.
lostdaytomorrow
06-20-2009, 01:43 PM
I'm really looking forward to getting my LI's soon knowing of Cliff's great CS.