View Full Version : different kinds of heads in jammers?
Mackid343
10-24-2005, 11:19 PM
i'm somewhat new to the laser jamming world....
just wondering what the difference is between a blinder for example and an AL6, how can the AL6 function with only one head and have such good performance and the blinder have 2 and not do quite as well? is this the difference between diodes(?) and something else?
thanks
Rottman
10-25-2005, 09:51 AM
Good question!
jimbonzzz
10-25-2005, 11:42 AM
Blinder uses LEDs. So do the Belscort jammers I think.
Lidatek and Antilaser use laser diodes, which have much more power.
Jim
Rottman
10-25-2005, 12:28 PM
Dr Jim wouldn't the new drive smart be better than the AL6 then because its dual diodes?
crazyVOLVOrob
10-25-2005, 12:44 PM
Dr Jim wouldn't the new drive smart be better than the AL6 then because its dual diodes?i doubt it i use two diodes on my lidatek and the AntiLaser is still better
Mackid343
10-25-2005, 03:25 PM
ok, that makes sense. how would the al6 detect the lidar shot if the beam is not wide enough to hit the transciever from your headlight?
crazyVOLVOrob
10-25-2005, 04:36 PM
Laser jammers are so sensitive to laser they detect all hit at the car...Lidatek is the most sensitive
Mackid343
10-25-2005, 04:37 PM
Laser jammers are so sensitive to laser they detect all hit at the car...Lidatek is the most sensitive
got it. i had heard somewhere that if a blinder head isnt hit with the beam, then it wont fire and wont jam, thats why they say like 18" max from the head i thought
crazyVOLVOrob
10-25-2005, 04:46 PM
Laser jammers are so sensitive to laser they detect all hit at the car...Lidatek is the most sensitive
got it. i had heard somewhere that if a blinder head isnt hit with the beam, then it wont fire and wont jam, thats why they say like 18" max from the head i thoughtMost cops will shot laser at 500 ft + so that means the beam is 18" at 500ft and i guarantee you have a jamming head with in 18" of your licence plate which is the first target seting off the jammer
Granted if you pionted the Laser jammer at another car i doubt laser jammer would activate....However the Lidatek alerted when Outrun's truck was pointed in the opposite direction
jimbonzzz
10-25-2005, 04:53 PM
ok, that makes sense. how would the al6 detect the lidar shot if the beam is not wide enough to hit the transciever from your headlight?
I think if the detector part in it is sensitive enough, it can detect it even if the main "BEAM" isn't on it. For example, JTW used to have a video testing Laser Atlanta Stealth Mode, where he used a camera that could see infrared. When he shot the Escort, the main "Beam" wasn't even on the Valentine and it alerted.
Some of the jammers we tested at the GOL tests also seemed like they had this kind of sensitivity.
Jim
dirty howie
10-25-2005, 05:09 PM
I've never used a Lidar gun or seen it in use. But I would think that aiming at a small moving target like a licence plate.....one would naturally spray the beam all over the front of the car. Right or Wrong???
DH
spankyaf
10-25-2005, 08:44 PM
Yes there is "jiggle" but the cops are trained to minimize it since it will delay the gun from getting a read. Tripod mounts would jiggle less than handheld. Ever use a camera with strong telephoto lense?
At least according to the LTI 20 20 manual
"Try to allow the target to track within your sight without sudden or abrupt panning of the device"
jimbonzzz
10-25-2005, 10:05 PM
Yeah the LTI Ultralyte is badass on a tripod.
But use it by hand and it cuts the range and target acquisition time considerably!