View Full Version : veil coming off :(
Mackid343
11-06-2005, 12:13 AM
so i reapplied veil to my headlights 2 days ago and since i didnt do such a good job on one headlight, i decided to re-do it today. i used a portable hair dryer (reccomended by the veil guy) to make sure the coating was dry becuase i knew that it might rain later that day. well it did rain and when i got home, i looked at both headlights and there are spots that look as if the veil has chipped off!! :( i would have expected this to happen on the headlight that i applied today, but the other one looks the same!! any ideas as to why this happend? did i do something wrong when i applied it, like not put a thick enough coat on it? or did i screw up my can when i applied some the first time and forgot to shake it?
SmaartAasSaabr
11-06-2005, 05:37 PM
How cold is it in Wisconsin now?
I'd probably remove the headlights and take them in your house, let them get up to room temperature before applying. Then give them a good 12 hours drying time, or more. Who needs headlights when the sun's up? 8)
Mackid343
11-06-2005, 05:40 PM
How cold is it in Wisconsin now?
I'd probably remove the headlights and take them in your house, let them get up to room temperature before applying. Then give them a good 12 hours drying time, or more. Who needs headlights when the sun's up? 8)
when i applied it was about 55-65 and just dropped lately to about 45-50 for highs. lows kinda cold tho i guess, like 35-40's
fasthappy
11-06-2005, 07:38 PM
Mackid343,
I dont think you screwed anything up other then, mixing wet weather w/Veil.
Same exact thing happen to me. Rain and Veil, dude, do not mix. Funny, that's what the directions say too!
If you hit my link below you will see how removing veil went for me. Some scary moments as I thought my headlights were F***** for a while!
Good news is, using rubbing alcohol, patience and a lot of elbow grease, all of it came off a-ok.
Note I have two very diff kind of headlights. Some fancy kind on the miata and one more normal kind on the trooper. Both eventually cleared off to "just like new".
Be sure hit the 2nd link on the site titled FASTHAPPY to see the headlight pics and there are 2 pages there.
Speedon!
Mackid343
11-06-2005, 07:46 PM
Mackid343,
I dont think you screwed anything up other then, mixing wet weather w/Veil.
Same exact thing happen to me. Rain and Veil, dude, do not mix. Funny, that's what the directions say too!
If you hit my link below you will see how removing veil went for me. Some scary moments as I thought my headlights were F***** for a while!
Good news is, using rubbing alcohol, patience and a lot of elbow grease, all of it came off a-ok.
Note I have two very diff kind of headlights. Some fancy kind on the miata and one more normal kind on the trooper. Both eventually cleared off to "just like new".
Be sure hit the 2nd link on the site titled FASTHAPPY to see the headlight pics and there are 2 pages there.
Speedon!
same thing happend to me when i tried taking my first coat off. it scared me a bit but i kept scrubbing and it all came off. did you have the same problem of it coming off after a day or 2 in the rain? or just after you put it on?
Mackid343
11-06-2005, 11:26 PM
instead of taking the lights out, since i'm not very mechanically inclined and dont want my parents to have a fit, what if i set up a portable electric heater in front of my car and let it put heat on the light for a while, then apply the veil? that would certianly dry it quite completely :D
fasthappy
11-07-2005, 02:17 AM
[/quote]same thing happend to me when i tried taking my first coat off. it scared me a bit but i kept scrubbing and it all came off. did you have the same problem of it coming off after a day or 2 in the rain? or just after you put it on?[/quote]
Yes and no. Yes for the rain effect issue. Was heading up to door county, campin, knew that applying it 24 hours before I bolted was risky as "scattered showers" was in the forecast. FnA. Life in Wisconsin. Approx 30 some hours later, on the road, it started to sprinkle. Not aheavy rain at all.
By the time I got to door county, the veil had flaked off well over half of each headlight.
Prior to that tho, the veil stuck on the troopers headlight like superglu.
I mean, I ran that thing thru carwashes etc, didnt smudge or budge.
BUT - on the miata lights, I applied it same way as I did on the trooper and after a 8 hour, high speed :) car ride, it was starting to come off.
Wasnt flaking off as it did w/the rain but more like, worn, rubbed off.
I can only guess the diff between the trooper app where it stayed on thru thick and thin and the miata's wearing off might be:
1) diff headlight materials
2) rate of speed during travel
As for heating up your lights now to reapply, seems like a decent idea to me *IF* you make sure to unplug or remove anything that might spark up - your veil!!
I do believe, its flammable.
Dilip
11-08-2005, 03:06 AM
i'm sorry to hear about ur situation.
U should throughoy clean your headlights with alcohol. Let it dry, then reapply veil. make sure you shake the can and let it sit for 5 mins.
Then, try not to drive your car immediately coz the wind/dirt will mess up the veil. and definately do not let the veil get wet for at least 24 hours.
Mackid343
11-14-2005, 12:40 AM
well the remaining amount of veil has stuck quite well so i'm guessing i just didnt let it dry long enough before driving. wont do that again... instead of being an idoit and driving about an hour after i applied and hair-dryed the veil, i'll hair-dry it and let it go overnight or longer if i can
Dilip
11-14-2005, 10:21 AM
any photos?
Mackid343
11-14-2005, 10:22 PM
hopefully i can get some up soon, it looks kinda nasty - haha
heres the re-done one, before it mostly came off. looked pretty good to me:
http://bjorklundcentral.com/html/pictures/laser/veilheadlight/hpim5786.jpg
those bump things on there are horrible to work around! the veil always sags and drips around them!
Dilip
11-14-2005, 10:24 PM
did u take that pic immediately after you put on the veil? Or was it 24 hours later after it dried?
It looks way better than mine!
Mackid343
11-14-2005, 10:28 PM
i believe that was like 10 min after i put it on. dont remember if i hair-dryed it yet tho. i'll go down now and take a flash picture of whats left
Dilip
11-14-2005, 10:39 PM
i remember on mine.....it looked beautiful as soon as i put the veil on, but the next morning it looks completely different.
Mackid343
11-14-2005, 10:40 PM
heres what it looks like now. one of the shots looks wet becuase i just drove home and its quite rainy now.
pretty good one, re-done light
http://bjorklundcentral.com/html/pictures/laser/veilheadlight/comingoff/HPIM5819.JPG
shot of other light done once
http://bjorklundcentral.com/html/pictures/laser/veilheadlight/comingoff/HPIM5824.JPG
re done one, not so good but kinda can see a few specs of veil left
http://bjorklundcentral.com/html/pictures/laser/veilheadlight/comingoff/HPIM5827.JPG
the speccs are whats left
http://bjorklundcentral.com/html/pictures/laser/veilheadlight/comingoff/HPIM5828.JPG
good shot of other light, whats left of it anyway :)
http://bjorklundcentral.com/html/pictures/laser/veilheadlight/comingoff/HPIM5829.JPG
open the original size and enlarge it to full resolution to see, its good quality. i could see it quite clearly. sorry it takes forever to load, i'll set up a photobucket or webshots account real soon. dont have the time tonight
Dilip
11-14-2005, 10:46 PM
wow, your first picture looks amazing. Is it alredy more than 12 hours since u put it on? it looks so nice and clear. Mine's very blurry :(
I'm beginning to wonder if my Veil was the older version from last year?
What did u use to put the veil on? The brush?
Mackid343
11-14-2005, 10:48 PM
i wish i could say it looked that good - lol. its basically all gone. the pictures are hard to take because of the low light as it is night time here and my garage is rather dark. the other light that has the majority left is what it did look like before. yes i used the larger of the 2 foam brushes that came with it. worked quite well
Mackid343
11-14-2005, 10:51 PM
on the first picture, the blue-ish specs you can see in the left half of the picture, to the right of the orange part of the light is the remaining veil. on the last one, if you enlarge and look at the top and bottom, you'll see little specs of clarity where the veil has come off.
Dilip
11-15-2005, 12:09 AM
I"m still a bit confused. so now u don't have veil properly put on your lights yet?
oh....and a black bra would look horrible!
Mackid343
11-15-2005, 12:17 AM
no i do not have veil on my lights properly. when i got my veil, i started by applying it to the right headlight and it didnt look right so i applied a 2nd coat. that was before i realized you had to shake it. once i shook it, i applied to the left headlight and it looked great. then applied it correctly for a 3rd time to the right light and it too looked ok, just a little dark. hair dryed both so i could drive the next day. then when i had some spare time 2 days later, i decided to re-do the right light so that it wouldnt be as dark. i took all of the old veil off and did a much better job on this coat (less streaking and dripping). then i got caught in a bad rain storm the next night on my way home from a friends party. the right headlight has very little veil left on it and the left one has a good amount, but it is chipping around the edges and doesnt look as thick as it did before
Dilip
11-15-2005, 12:20 AM
oh that sux that u bumped into the rain. You really got to let it dry for 24 hours.
so.......r u planning on re-doing both lights completely?
Mackid343
11-15-2005, 12:21 AM
oh that sux that u bumped into the rain. You really got to let it dry for 24 hours.
so.......r u planning on re-doing both lights completely?
yes, i plan on doing it over the next weekend hopefully, when the temperatures arent too cold and when i can hair dry it and let it sit at least overnight if not for 24 hours or more
Dilip
11-15-2005, 12:26 AM
Well....let me know how it goes. Are u the one who posted me pics of your lasershield 2 weeks ago?
and.....what car is your white car? I don't quite recgonize it.
Mackid343
11-15-2005, 12:32 AM
Well....let me know how it goes. Are u the one who posted me pics of your lasershield 2 weeks ago?
and.....what car is your white car? I don't quite recgonize it.
i'll post everything as soon as i can when its done. yes i did post pictures here of my lasershield -->http://www.radardetector.net/got-my-LS-and-veil-today-5756t.php
my car is a 2004 Pontiac Grand Am GT. i love it. its not extremely fast, but definately not slow either :). similar in power to your mazda if i'm correct. i wish it wasnt white, but i didn't know about laser reflectivity when i was looking around for a car
Dilip
11-15-2005, 12:35 AM
Here in HK, we don't get american cars, so i really have noooo clue what the Pontiac is, and what its' specs are.
Yeah even i wish i didn't get yellow! This forum didn't exist 2 years ago :(
Mackid343
11-15-2005, 12:50 AM
Here in HK, we don't get american cars, so i really have noooo clue what the Pontiac is, and what its' specs are.
Yeah even i wish i didn't get yellow! This forum didn't exist 2 years ago :(
i PM'ed you some info on the grand am