PDA

View Full Version : Veiled my Laser shield... DOH!



sko
11-08-2005, 03:22 PM
So anyone know how I can get all this crap off my laser shield?

Its really dark w/ veil on and its dried on, I tried soaking it in bleach, no luck... I know the manual says to use amonia, I will try that too, but I have my doubts... considering the strength of bleach vs amonia.

Any help appritiated, thanks!

Nick

Dilip
11-08-2005, 08:34 PM
Use alcohol solution. And rub it hard with some cloth.
You can buy the solution at many places.

sko
11-10-2005, 12:19 AM
Great, thank you!

Nick

Iknox
11-15-2005, 08:11 AM
yea i did the same shyt i have to hit that up with 90% alcohol

DaViper
11-15-2005, 10:37 AM
Windex also works. I found it worked even better than rubbing alcohol. Just spray it on and let it sit for about 30 seconds, and it'll wipe right off.

-DaViper

Veil Guy
11-15-2005, 07:49 PM
sko,

as it states in the manual, you may use household ammonia and/or rubbing alcohol solution to safely remove veil. and you can put a light coating of veil on the shield without causing it to darken too much.

vg 8)

AirMoore
11-25-2005, 09:18 PM
Please make sure you dont mix the ammonia or bleach on accident since you may be trying both solutions. (yes I know its common sense)...but ya never know, people have been killed before by doing that.

StlouisX50
12-27-2005, 04:37 PM
Veil guy and others.... I have read that you can put Veil on both sides of the laser shield and cut down on the laser gun getting a reading. What was the problem here where it made it dark? If some say put a coat on the front and a coat on the back <2 sides> wouldnt this be two coats? Also how much does apply a coating of Veil with a lasershield cut down on the lasers proformance? We have seen how Veil by itself, but I have not seen any videos of it applied to the lasershield.

brick
12-27-2005, 05:15 PM
The VEIL instructions are to put it on both sides of a regular license plate cover, which is smooth and doesn't accept as much of the product. This is still very dark, though.

StlouisX50
12-28-2005, 04:22 PM
I might try it on one side and see how it works , thanks :D