View Full Version : is this going to be a problem without VEIL?
Dilip
11-15-2005, 07:44 AM
Hi
I got my lasershield today, but i had to get some kinda plastic frame to mount it. As u can see in the pic, i completely forgot that the frame was fully reflective, it just did not cross my mind that it would certainly help a laser gun!!! Until after i got home , then i realized.
As u can see in the pic........light only reflects off the top part of the frame. Would I need to do something about this? Veil guy? Pls comment?
I could always put some black tape to cover it descretly.
Thanks
http://home.netvigator.com/~dilipb/Image069.jpg
Iknox
11-15-2005, 08:07 AM
ya that would be a big problem paint it up with veil
Dilip
11-15-2005, 08:14 AM
I don't have any veil left :(
I could always stick black tape over the edges, or just paint it with a thick black felt tip pen.
Iknox
11-15-2005, 08:21 AM
there ya go that would work
sethy
11-15-2005, 09:57 AM
Black tape that sucker. Any chrome is murder
Dilip
11-15-2005, 10:04 AM
I CANNOT BELIEVEEEEEEE how stupid i was for not realizing this when he was installing it! AARgghhhhhhh!!!!!!!!!! Kinda defeats the entire purpose of the laser shield.
Mackid343
11-15-2005, 03:44 PM
the black tape sounds like a good idea. it would look alot better than black marker. looks alot better now with the lasersheild rather than your plate being as dark as it was before
Dilip
11-15-2005, 09:02 PM
Here is a pic during the day.
http://home.netvigator.com/~dilipb/Image070.jpg
From far, the edges are very very small, i even wonder if it's enough to reflect the beam from a laser gun back to the gun?
Veil guy: Pls advise?
Road Warrior
11-15-2005, 09:15 PM
Here is a pic during the day.
http://home.netvigator.com/~dilipb/Image070.jpg
From far, the edges are very very small, i even wonder if it's enough to reflect the beam from a laser gun back to the gun?
Veil guy: Pls advise?
You gotta deal with ANYTHING chromed, that includes the plate frame AND the Mazda logo... for the frame you can easily use any black touch-up paint (the one with a little brush), for the logo, it's up to you if you wanna paint it in black...
And hey, what have you done with the whole can of Veil??? I have a small car like yours, I've done two coatings and hardly used 1/5 of the whole can, headlights only!
Dilip
11-15-2005, 09:17 PM
I already veiled the mazda logo.
I shared my can with somebody else, and he has done his back and front of two vehicles, and i have done my back and front, and i have also done my front several times, thats why its finished.
Road Warrior
11-15-2005, 09:23 PM
I already veiled the mazda logo.
I shared my can with somebody else, and he has done his back and front of two vehicles, and i have done my back and front, and i have also done my front several times, thats why its finished.
10-4
And one more thing, are you sure that no HK cops enjoy reading this site, ever??? :roll: Your license plate, if that's the real one, can be seen by everybody in cyberspace, not a good thing, you should be more careful with your privacy...
Dilip
11-15-2005, 09:26 PM
Hmm.........i don't think they would? I really doubt it. I have never heard of this site from anyone in HK. Nobody in HK has ever heard of Veil or lasershield......
:roll:
Road Warrior
11-15-2005, 09:44 PM
Hmm.........i don't think they would? I really doubt it. I have never heard of this site from anyone in HK. Nobody in HK has ever heard of Veil or lasershield......
:roll:
You might be right... now a real story: before I decided to go for LaserShield (from Roy) I tested the Toronto market for such stuff, I went to 2-3 regular car shops and then to a huge mall called "Pacific Mall" located in Toronto (Steeles/Kennedy), hundreds of small stores with everything for everybody, 99.99% of people inside the mall, store employees and buyers are Chinese only, I asked people in some 4-5 stores about LS, NOBODY heard anything about such LS or plates that stop IR reflections, all offered me regular plastic plate covers that you can find anywhere around... so if the Chinese who up here try to sell you anything, and I say ANYTHING, do not know what LS really is or what it can do for you, you realize how "popular" this LS really is... same with Veil... so rest assure that HK cops have no idea what you got on your car... but try to keep it your little secret, unless :roll:
Dilip
11-15-2005, 09:48 PM
haha, yeah thats quite a story. I"m sure nobody in HK knows. I went to a car shop that i'm very familiar with for them to custom make the plate and plate holder for my laser shield. They sell everything for modifying cars, sound systems, subwoofers, amps, xenon lights, radar detetors (RMR) and anti-photo stuff, but they had no clue what Veil was and the laser shiled. He kept thinking it was for anti-photo but i explained it was for anti-laser. But he could'nt understand the concept of why i had to veil my lights.
Road Warrior
11-15-2005, 09:52 PM
haha, yeah thats quite a story. I"m sure nobody in HK knows. I went to a car shop that i'm very familiar with for them to custom make the plate and plate holder for my laser shield. They sell everything for modifying cars, sound systems, subwoofers, amps, xenon lights, radar detetors (RMR) and anti-photo stuff, but they had no clue what Veil was and the laser shiled. He kept thinking it was for anti-photo but i explained it was for anti-laser. But he could'nt understand the concept of why i had to veil my lights.
Cause we all know where Veil and LS came from... ONLY IN AMERICA (by Brooks & Dunn) :wink:
SmaartAasSaabr
11-15-2005, 10:01 PM
How do you know that Dillip isn't just a very experienced Photoshop user who has actually re-arranged the numbers on his plate so they conveniently match to another yellow Mazda 6 in Hong Kong... 8) :wink: :wink:
Dilip
11-15-2005, 10:03 PM
Hey........that's a good idea :)
I use photoshop everyday for my watch business.
but i can't be bothered to do that.
Road Warrior
11-15-2005, 10:39 PM
Hey Dilip, did you give any Veil coating over the LS or your plate? The very first picture on this thread shows a pretty dark license plate, how come? :roll: My Ontario plate, with LS over it but no Veil coating over LS or plate, is still white but no more IR reflections! Is the HK plate so dark from the very begining?
Dilip
11-15-2005, 10:41 PM
No, ther'es no veil on it. It's because i took the 1st pic in a carpark with my phone camera.
Hong Kong plates are super reflective white, its' not the slightest bit dark.
Road Warrior
11-15-2005, 10:47 PM
No, ther'es no veil on it. It's because i took the 1st pic in a carpark with my phone camera.
Hong Kong plates are super reflective white, its' not the slightest bit dark.
10-4
Do the IR test, like I did a couple of weeks ago, take a camcorder with an IR NightShot feature, mine is a Sony, and test your newly aquired LS and Veil, in the total dark of course... the best is to have other cars, with no LS and Veil, near your car, so you will be able to see the diference, then watch your recording on your TV set, and watch it until you get really happy and satisfied with your investment... good luck :)