View Full Version : Applying veil....
sethy
03-03-2005, 09:03 AM
Bob, when I apply the veil how think of a coat is supposed to be on it? I applied it, but then to smooth it out i used a sponge and im not sure if i just soaked all the veil right back up into the spunge
http://69.133.113.105/PHTO0010.jpg
http://69.133.113.105/PHTO0011.jpg
Does that look about right? Is there a trick to evenly applying this stuff?
Veil Guy
03-03-2005, 12:24 PM
Sethy,
I am afraid to say that it requires a learned technique.
I am always trying to find ways to ease the application of VEIL.
I tend not to use the sponge applicator for other than small chrome trim.
Letting the material stand for about four-five minutes after shaking seems to make a considerable difference (and improvement) in coating quality.
Your images did not appear. Why not pm to me or send me an email at
"inquiries at laserveil.com"
When I see what you have, I'll be able to comment better.
The Veil Guy 8)
marlinspike
03-03-2005, 02:18 PM
His pictures work for me. When I get back to school I'm going to try using a paint roller and I'll report back. Maybe Seth could try that and not have to wait for my results.
Richard
sethy
03-03-2005, 03:50 PM
I found an easy way to apply veil! shake the can, and open the can- dab a spunge on the lid of the can and apply it. There will be low streaks, and it takes seconds!
marlinspike
03-03-2005, 04:34 PM
Do you mean the sponge brush or like a kitchen sponge?
Richard
sethy
03-03-2005, 06:38 PM
I actually got a really soft foam and used that. The brush that he gives would work too, but I found it a bit small and parts would start drying before i finished going over the lights. Using my trick I coated a set of lights w/o streaking in about 30 seconds
Veil Guy
03-06-2005, 11:14 AM
Here are some pics:
Follow this link:
http://www.radardetector.net/viewtopic.php?t=611&start=16
The Veil Guy 8)