View Full Version : Veil on WHITE license plates?
Crash
03-04-2005, 06:01 PM
Any option of taking a picture of two coats of VEIL on a white license plate? They donīt allow plate covers in the EU and in my country specifically they also disallow any coatings on the license plates. I need to see how visible the coating actually is. Thanks
Veil Guy
03-04-2005, 06:53 PM
I have a light coloured plate that contains a lot of white.
I am not going to BS you - its going to appear darker.
Unfortunately, form follows function in this case.
I will continue to try to engineer some colour over time.
I'll try to come up with something for you to view online.
The Veil (www.veil.us) Guy 8)
marlinspike
03-04-2005, 10:54 PM
Any option of taking a picture of two coats of VEIL on a white license plate? They donīt allow plate covers in the EU and in my country specifically they also disallow any coatings on the license plates. I need to see how visible the coating actually is. Thanks
It's very noticeable, but I bet you could pass it off as road grime (and maybe keep some rubbing alcohol in a glass cleaner bottle, and say to the cop, "look's like road grime to me...I have a bottle of glass cleaner in my trunk...see come's right off")
Richard
Veil Guy
03-04-2005, 11:26 PM
:lol:
The Veil (www.veil.us) Guy 8)
Crash
03-05-2005, 06:20 AM
:D That sounds plausible. Iīd really appreciate the pictures. I know form follows function and the apperance isnīt a priority, as long as the cops donīt notice.
Veil Guy
03-05-2005, 08:30 AM
Believe, I tried as best as I could to make the product as light or neutral in colour.
My options, at this point, unfortunately, are limited.
VEIL doesn't appear terribly noticeable on the headlights, foglights, and or directional indicators.
Plates are another story, however. I guest there are always plate covers - for those who can use them. But I have personally found some to be enitrely bogus!
One thing to consider is the possibility of removing the front plate and risking an equipment violation from your state. I would definately leave the rear plate on - or at least, move it to the windshield area and again risking a non-moving violation.
One brilliant gentlemen once told me that he photocopied (colour) his plate and used the copy on the vehicle. Say bye-bye to retroreflective materials!
Believe me, when I can come up with an even more lighter version, I will put it out there, so long as I don't sacrifice performance in the slightest.
The Veil (www.veil.us) Guy 8)
marlinspike
03-05-2005, 08:35 AM
I would guess that in Germany not having a front plate would be taken more seriously than in the US.
Richard
Veil Guy
03-05-2005, 08:46 AM
marlinspike,
Is this where you are located? If so, are you stationed there?
The Veil (www.veil.us) Guy 8)
Crash
03-05-2005, 09:08 AM
Well, I live in the EU and traffic fines are roughly similar between counntries. Not running a front plate will cost you roughly $250... Covering the plate with anything will also cost you $250. Plus, they take away your license plates and declare your car as being not roadworthy. Veil Guy, I appreciate the effort in making the Veil as invisible to the naked eye as possible but I would be satisfied with even the pictures of the current version. Just gotta see how much different the color is from when my car is dirty :) .
Veil Guy
03-05-2005, 09:14 AM
Crash,
This makes a couple of requests. I'll try to come up with something today.
I think my wife has the digital camera, but I'll try to get it from her.
The Veil Guy 8)
marlinspike
03-05-2005, 10:25 AM
marlinspike,
Is this where you are located? If so, are you stationed there?
The Veil (www.veil.us) Guy 8)
I'm not, but the original poster said that's where he is.
Richard
Crash
03-05-2005, 12:53 PM
Crash,
This makes a couple of requests. I'll try to come up with something today.
I think my wife has the digital camera, but I'll try to get it from her.
The Veil Guy 8)
Thanks! Appreciate it :)
happya$$
03-05-2005, 06:00 PM
Believe, I tried as best as I could to make the product as light or neutral in colour.
My options, at this point, unfortunately, are limited.
VEIL doesn't appear terribly noticeable on the headlights, foglights, and or directional indicators.
Plates are another story, however. I guest there are always plate covers - for those who can use them. But I have personally found some to be enitrely bogus!
One thing to consider is the possibility of removing the front plate and risking an equipment violation from your state. I would definately leave the rear plate on - or at least, move it to the windshield area and again risking a non-moving violation.
One brilliant gentlemen once told me that he photocopied (colour) his plate and used the copy on the vehicle. Say bye-bye to retroreflective materials!
Believe me, when I can come up with an even more lighter version, I will put it out there, so long as I don't sacrifice performance in the slightest.
The Veil (www.veil.us) Guy 8)
Bob it is funny you say this "and used the copy on the vehicle. Say bye-bye to retroreflective materials!" I have seriously been thinking of doing this for a while now. Would this be illegal?
marlinspike
03-05-2005, 06:07 PM
If you're state requires front plates, yes it would be illegal, but how hard is the cop looking at your front plate?
Richard
Veil Guy
03-06-2005, 09:49 AM
Another owner of a retro-reflective plate, I believe, used a dish/pan scrubber to intentially scratch the reflective film on the plate to reduce the "magnification effect" of the material before applying VEIL.
The Veil Guy 8)
Crash
03-06-2005, 10:06 AM
He scrubbed it off? Gotta try that...
Veil Guy
03-06-2005, 11:10 AM
Just try it on a smal portion first and see what the effect is. I would stay away from the embossings.
That plate won't look too pretty, I have been told, but the retro-reflective effect may be significantly diminished.
Let us know what you find out...
BTW, I got pictures here for you to view. The one NJ plate isn't exactly white but is pretty light in colour.
http://www.laserveil.com/images/veil-plates-untreated-1.jpg
untreated - VEIL coating removed
http://www.laserveil.com/images/veil-plates-treated-1.jpg
treated w/ one good coating
When, I removed the coating, there was no colour residue found on either plate.
Other than the smudge effect on a couple of the letters, photos untouched and were shot at similar tod and exposure compensations.
IMHO, if they were dirty (like the rest of the car - geez) then it would probably even be less noticeable.
These plates were covered with VEIL in a bathroom sink and initially tilted about 10/20 degrees using only the brush and not the foam applicator. Any coagulation around the emossed letters/numbers was brushed away while wet and allowed to flow and level so no streaks are readily apparent upon drying. Also the VEIL material was left alone for about five minutes after shaking before using.
The plate on the left is an older NJ plate that is not retroreflective in nature. The plate on the right is a newer Jersey plate that is retroflective and may lend itself to one additional thin additional coating to completely quench out the effect of the retro-reflective material.
The Veil Guy 8)
Crash
03-06-2005, 12:05 PM
Hey, thanks for the pics! Something tells me that it shouldnīt be noticable when the car is dirty, so Iīll pull the trigger sometime soon (with temps of -10 °C I donīt think trying to apply Veil in these conditions is a good idea) :wink: .
Veil Guy
03-06-2005, 04:25 PM
'member:
It was pretty cold here today and yesterday. I took these older plates that I had and applied VEIL to them in a bathroom sink and let them dry overnight.
Temperature was a nice 70+ degrees - and its all year 'round.
The Veil Guy 8)
marlinspike
03-06-2005, 04:27 PM
Your POOR 540! Sheesh give that thing a wash.
Richard
Veil Guy
03-06-2005, 04:39 PM
Haha.
Tell me about it.
But just like happya$$ I am testing VEIL's durability :wink:
In otherwords, I am too darn lazy to wash it.
Besides, I think, the crud helps with laser stealthiness since I have metallic paint.
Does that get me off?
My vette on the otherhand is stored in the winter time! :lol:
I used to garage the Bimmer, but my wife oftentimes is out on the road first in the early morning and I figured its better for her to have the priority to the open garage bay!
Besides, to be honest with you, I got nailed with three tickets just after my return from my trip out West all in one day!
Local PA police use electronic speed measurement (VASCAR) techniques and I hit the trifecta as I was driving to upstate PA through a lot of coal mining towns (like Ashland and Centralia, which is still burning.)
One of the officers had mentioned that he noticed that I was driving a real shiny BMW through town. Oops. I have to appear in court (for all three) next week. I don't think I am going to wash it until after. :oops:
The Veil Guy 8)
marlinspike
03-06-2005, 05:05 PM
Automobile magazine actually suggested not washing your car to make it harder to get a laser reading.
Richard
Veil Guy
03-06-2005, 05:06 PM
Yeah. Yeah. That's the reason. :roll:
The Veil Guy 8)
marlinspike
03-06-2005, 05:10 PM
My plate seems to be getting more and more purple. I'm going to try soaking it in a tray of rubbing alcohol tomorrow and see what I end up with.
Richard
Veil Guy
03-07-2005, 10:35 PM
All right.
One ticket down and two to go...
We had a taste of spring today with upper 60s so I cleaned my baby and took a couple of shots.
Here's one now that she's clean!
http://www.laserveil.com/images/rear-540-cleaned-1.jpg
the veil guy 8)
happya$$
03-08-2005, 06:39 AM
Wow you got three tickets! I told you that VASCAR is lethal. Pray that local officers will be given the authority to use laser and radar not just troopers. I told you all I would rather face laser and radar ANY day over the lethal and deadly VASCAR. The latest VASCAR technology makes it VERY easy for the offiver to use.
marlinspike
03-08-2005, 06:45 AM
Shouldn't be a problem if you check your rear view a lot though, no? I assume they have to be somewhat close, since if they are far away they won't be able to judge a change in distance very well.
Richard
langoti
03-28-2005, 07:16 PM
Hey - I'm no expert at this stuff - and until 5 minutes ago, I didn't even know what VEIL was - but I just had a thought -
You're doing this to hide from Laser, Right? And lasers are light signals - so they have to be directional. So why don't you just stick something about a 1/2 inch thick behind the top part of your plates? This will position your plates at about a 5 degree downward angle - and any laser striking your plate will be deflected into the ground within about 20-30 feet. No?
The only time it wouldn't work is if you were on top of a hill, starting to make a downward descent - and the cop were someplace between the top and the bottom of the hill.
On second thought, you should put the inserts on either the right or left side of the plate. What do you think - am I nuts? :)
brick
03-28-2005, 07:22 PM
Hey - I'm no expert at this stuff - and until 5 minutes ago, I didn't even know what VEIL was - but I just had a thought -
You're doing this to hide from Laser, Right? And lasers are light signals - so they have to be directional. So why don't you just stick something about a 1/2 inch thick behind the top part of your plates? This will position your plates at about a 5 degree downward angle - and any laser striking your plate will be deflected into the ground within about 20-30 feet. No?
The only time it wouldn't work is if you were on top of a hill, starting to make a downward descent - and the cop were someplace between the top and the bottom of the hill.
On second thought, you should put the inserts on either the right or left side of the plate. What do you think - am I nuts? :)
It's a good idea but foiled by retroreflective paint. No matter where the plate is facing, the light is returned in the direction from which it came. Unfortunately no amount of tilt would do any good. It might work for those few plates without retroreflective paint if the return from the raised numbering isn't too strong.
spankyaf
04-07-2005, 01:38 PM
I did the photocopy thing on Ont plates behind a plastic cover. Its impossible to tell without removing the plastic cover.
Is there anything I can apply to plastic cover short of a bra. I took a flash picture of my front end and got quite a bit of reflection off of the bumper area around the plate.
I've got Veil just waiting for warmer weather to apply
silver impala
Veil Guy
04-09-2005, 06:38 AM
spankyaf,
Brilliant. I am glad it looks great. The gentleman who came up with this idea was really sharp!
The Veil Guy 8)