PDA

View Full Version : ZX-14 Protection



spike
12-21-2009, 07:51 PM
Hey Guys,

I have a 2008 ZX-14 that needs some countermeasures. Eventually, I want to get a detector (trying to decide between V1 and Escort ix) and a jammer (Blinder/LI/?).

I want to get the detector to start out with; I assume I can create some sort of bracket mount for it to go in behind the windscreen. But, for the first problem, I HAVE to be able to hear the detector. I don't want to have to constantly be watching for the red flashes. I understand that both of the detectors I'm considering have an audio out jack so, theoretically, there is a way to get sound out of the device; however, I certainly don't want to have a cord traveling its way from the detector, through my jacket and into my helmet..no, no no! Moreover, I ALWAYS ride with ear plugs and with all the wind noise there is no way I would be able to hear native speaker output.

How can this problem be solved with existing technology? Theoretically, the detector sound output could be routed to a unit installed on the bike that could then be transmitted in a wireless fashion to Bluetooth enabled and sound isolating earphones. Is anyone know where I could purchase such a system? Surely, other people have this problem too and there must be a solution for it, but I haven't been able to find it.
:confused::confused::confused:

trailtow
12-21-2009, 08:24 PM
here is the mount and a wireless system to see the alets they sell on radarbusters website
Motorcycle Mounts : Motorcycle Radar Detectors : RadarBusters.com - Shop at Radar Busters
H.A.R.D. Radar Detection System - Motorcycle Radar Detectors at Radar Busters

spike
12-21-2009, 09:38 PM
here is the mount and a wireless system to see the alets they sell on radarbusters website
Motorcycle Mounts : Motorcycle Radar Detectors : RadarBusters.com - Shop at Radar Busters
H.A.R.D. Radar Detection System - Motorcycle Radar Detectors at Radar Busters

Thanks for the tip. Couple of concerns though:
1. Would it work with a full-face helmet?
2. How big is the receiver? Ad says just put the receiver in the cheek-space of the helmet. My helmets fit me pretty well and I'm thinking there's really not much space in there.

But, that still doesn't get me to where I want to be: wireless audio alerts emitted from isolating earphones. I really need to be able to hear the detector, not just see it...

allyoops
12-22-2009, 06:52 AM
VizAlert - works with V1 and your choice of any of the best jammers. It's wireless and you can keep your ear plugs.

YouTube - VizAlert Motorcycle Radar Detector Display

allyoops
12-22-2009, 07:03 AM
If you want to hear detector alerts, the best thing you could do would be to invest in a decent intercom system like the Intaride or the Autocom systems. (Google is your friend).

Then you could also hook up your cell phone, music etc, as well.

When you get round to adding in a jammer, we make a kit that can be used to connect audible jammer alerts into any of the intercom systems as well.

ks-waterbug
12-22-2009, 11:16 AM
I like the screamer over the HARD system, but only because I don't have to worry about batteries.

spike
12-22-2009, 05:13 PM
If you want to hear detector alerts, the best thing you could do would be to invest in a decent intercom system like the Intaride or the Autocom systems. (Google is your friend).

Then you could also hook up your cell phone, music etc, as well.

When you get round to adding in a jammer, we make a kit that can be used to connect audible jammer alerts into any of the intercom systems as well.

Thanks for the tips; however, it looks like that both Intaride and Autocom systems require components to be installed in the helmet. This is pretty much a deal-breaker for me.

What I want is a wireless headset with isolating earphones (e.g., Etymotic) that is able to receive from a transmitter installed on the bike. Does what I am looking for exist?

stealthfz1
12-22-2009, 06:06 PM
What I want is a wireless headset with isolating earphones (e.g., Etymotic) that is able to receive from a transmitter installed on the bike. Does what I am looking for exist?

I looked for that too when I was trying to set up my bike. I didn't find anything.

spike
12-22-2009, 06:56 PM
What I want is a wireless headset with isolating earphones (e.g., Etymotic) that is able to receive from a transmitter installed on the bike. Does what I am looking for exist?

I looked for that too when I was trying to set up my bike. I didn't find anything.

A bit mind-boggling, isn't it? All of the technology needed for such a setup already exists. Moreover, what is needed here is something that is not necessarily motorcycle-specific. I thought maybe I wasn't looking hard enough. You're the first person I've communicated with that said "Yes, I've looked for that but, No, I could not find it."

At this point, I guess I would settle for WIRED isolating earphones (these do exist) that plugged into another device (maybe residing i my jacket, but definitely not attached to the bike) that would receive signals from other devices (RD/GPS/ETC) and propagate them to the earphones. Any ideas on that kind of system?

snoopyc4
01-01-2010, 11:58 AM
This is axel_ny's install:

http://i304.photobucket.com/albums/nn165/rrdtogo/DSC00096.jpg

http://i304.photobucket.com/albums/nn165/rrdtogo/DSC00098.jpg

He has a lasermask jammer system and decided to stack the heads. Regardless of which jammer you choose, you need a dark helmet. That is the most reflective part of your whole front.

danham
01-23-2010, 10:42 AM
What I want is a wireless headset with isolating earphones (e.g., Etymotic) that is able to receive from a transmitter installed on the bike. Does what I am looking for exist?

I looked for that too when I was trying to set up my bike. I didn't find anything.

A bit mind-boggling, isn't it? All of the technology needed for such a setup already exists. Moreover, what is needed here is something that is not necessarily motorcycle-specific. I thought maybe I wasn't looking hard enough. You're the first person I've communicated with that said "Yes, I've looked for that but, No, I could not find it."

At this point, I guess I would settle for WIRED isolating earphones (these do exist) that plugged into another device (maybe residing i my jacket, but definitely not attached to the bike) that would receive signals from other devices (RD/GPS/ETC) and propagate them to the earphones. Any ideas on that kind of system?

Here's what I use and like very much. I have had less than good experience with various BT setups and want audio alerts, not Viz.

Etymotic ER6i noise-suppressing earphones, plugged into a Belkin Rock Star passive audio mixer which receives inputs from my V1 (with Remote Audio), my nuvi 760 GPS, and my iPhone (via the GPS, so I get alerted to incoming calls, can slow down or pull over and use the mic on the GPS to avoid having to remove my helmet).

Yes it means one short wire from the mixer into my jacket and up to my helmet, but it plugs in near the back of the fake tank on my BMW F800 ST and so does not flap in the wind or yank when I turn my head. And it's been 100% reliable so far with no batteries to worry about (other than the phone [g]).

-dan

spike
01-26-2010, 06:25 PM
Here's what I use and like very much. I have had less than good experience with various BT setups and want audio alerts, not Viz.

Etymotic ER6i noise-suppressing earphones, plugged into a Belkin Rock Star passive audio mixer which receives inputs from my V1 (with Remote Audio), my nuvi 760 GPS, and my iPhone (via the GPS, so I get alerted to incoming calls, can slow down or pull over and use the mic on the GPS to avoid having to remove my helmet).

Yes it means one short wire from the mixer into my jacket and up to my helmet, but it plugs in near the back of the fake tank on my BMW F800 ST and so does not flap in the wind or yank when I turn my head. And it's been 100% reliable so far with no batteries to worry about (other than the phone [g]).

-dan

Thanks for the tips, Dan. Help me understand your setup a little. You have, say, devices A, B and C going into the Belkin mixer and then your earphones going out of the mixer. I'm guessing you have the mixer mounted somehow on your bike?

I have not yet purchased the ER6i's and I'm wondering how they work with your helmet. I have some isolating earphones but they don't work well with the helmet at all. As soon as I put the helmet on the earphones dislodge and offer little protection from the wind.

stealthfz1
01-26-2010, 06:34 PM
I saw this today. Company in Australia claims to have a bluetooth set up for bikes.

"Bluetooth Modulator and Headset. A perfect kit for motorcycle radar detector users. our motorbike wireless headset solution is also available separately."

Forum rules say I can't post a link but I found it on Yahoo.

danham
01-26-2010, 07:06 PM
Thanks for the tips, Dan. Help me understand your setup a little. You have, say, devices A, B and C going into the Belkin mixer and then your earphones going out of the mixer. I'm guessing you have the mixer mounted somehow on your bike?

I have not yet purchased the ER6i's and I'm wondering how they work with your helmet. I have some isolating earphones but they don't work well with the helmet at all. As soon as I put the helmet on the earphones dislodge and offer little protection from the wind.

The Belkin Rockstar non-powered, passive mixer is affordable (<$10 at Amazon), takes up very little room under the fake tank on my F800, and accepts up to 6 plugs -- such as 5 inputs and one set of headphones. It tucks in behind the air box and I at first used some velcro, but it stays put without it -- take a look at Amazon pix of it; it's very compact.

You don't get as powerful choices in volume adjustment as you get with a powered mixer, such as the Tesseract I tried and ditched due to complexity, size, and power requirements, but seeing as the V1, iPhone and GPS all have adjustable volume, this is a non-issue other than initial setup. So yes, all three devices named here are plugged in as inputs to the Belkin and with a short extension cord sticking out near the front edge of the seat, I plug in my Etymotic ER6i's after I climb aboard.

Those earbuds work really well at isolating noise, fitting under my SHoei R1000, and blocking wind/road noise at least as well as a good set of foam EARs, perhaps better when they are inserted perfectly (takes some practice). They also provide very decent fidelity for music and ability to hear GPS directions and V1 alerts very clearly. My ears have always been hard to fit, but the tips supplied with the ER6i's work very well, do not fall out when putting the helmet off/on, and only begin to cause very minor discomfort after many, many hours of riding.

Let me know if you need any further detail.

-dan

EDIT: additional info: The V1 is hooked up from the Remote Audio to the Belkin using a 3.5 mm male-to-male cable. The GPS is connected via its headphone jack, but with a ground loop isolator necessary (I think) due to all the electronics its cable passes by on the BMW (fuel injection computer, ABS, immobilizer key, etc.), and the iPhone often runs via BT to the GPS instead of having its own hardwire input to the Belkin. Hope this helps.

hockey005
01-26-2010, 07:10 PM
lol man u got a zx-14....a crown vic isnt gonna catch u :cool:

porky786
03-28-2010, 05:46 PM
The v1 will be a night mare on a bike in comparison to the STI driver is wonderful, totally hands free function. NO reaching for muting or anything. and you will have to do that with out automute, if you have an RD in your ear.

I've been running one for over a year, luv it.

My ride area is all ka and kband , Lazer I know suks in a vehicle, but on a bike I've never been hit by lazer , going uphill sometimes bright sunshine, says its working.

but I dont know how good it is with real lazer hit on a bike, but it is unless for lazer in a vehicle

danham
03-29-2010, 06:38 PM
The v1 will be a night mare on a bike in comparison to the STI driver is wonderful, totally hands free function. NO reaching for muting or anything. and you will have to do that with out automute, if you have an RD in your ear.

I've been running one for over a year, luv it.

My ride area is all ka and kband , Lazer I know suks in a vehicle, but on a bike I've never been hit by lazer , going uphill sometimes bright sunshine, says its working.

but I dont know how good it is with real lazer hit on a bike, but it is unless for lazer in a vehicle

Gotta respectfully disagree. I won't debate with you whether the V1 or STI is a "better" RD -- each has its strengths and weaknesses and it boils down to personal preferences. But to say that the V1 would be a nightmare, well, if this is a nightmare then I hope I keep dreaming.

It has saved my bacon numerous times, including laser, and the threat indicator arrows are if anything even more valuable on two wheels than in a cage. Programmed properly it hardly ever needs manual muting. When it does, it's no more hassle than canceling a turn signal.

-dan

porky786
03-30-2010, 08:05 PM
I agree the v1 is great.

But on a motorcycle, I find a fully automatic one I dont have to quelch or touch at all with an ear jack, In a simple one peice unit.

The V1, is alittle more combersome to set up audio space wise and require more hands on management.


Thats really my only point , may not be an issue, but was to me in decision making on the bike.


I'm pretty sure I've been hit by lazer in my truck a few times, but never got any notice. Which if they aim for the plate, maybe that why. But my riding tends not to be in Lazer areas, so I just havent been hit with lazer on the bike, except falses from sunlight sometime running uphill.

Pretty sure a specific Lazer jammer would be best anyway

GUV
03-30-2010, 09:57 PM
I've been using a Redline with a Sony TMR-BT10 to transmit the audio & a Sony DRC-BT15 to receive the audio & a very small set of ear bud speakers.
I get about 4-5 hours of riding time (battery life) which is enough for a day out & I can still have Blueant F4 speakers mounted inside the helmet for the intercom/mobile phone/GPS. The Sony receiver comes with a lanyard so it hangs around my neck inside my jacket and the ear bud speaker wires comes up & out of my jacket collar then into the helmet.

You will also need a mono to stereo adaptor plug.

You do need to turn either the receiver or transmitter off if you are going to have any long stops or it wont last the full day, you only need to turn one off as the other will automatically switch of when it can no longer see the other.

Works a treat.

GUV.

Rydogg21
03-31-2010, 01:52 PM
I noticed in the one shot the radar detector is pointed through the tinted windscreen? I was under the impresion that this will dramatically decrease the effectiveness of the device?

porky786
04-03-2010, 11:01 PM
I use JVC marshmellow ear buds, but I modify them with Howard leght 33 db medium foam ear plugs.

Its techique sensitive installing with a ball point pen , punching a whole though the foam and using as a guide to get on the bud. Will work on any type bud.

Parker ball points have the right size pen cartridge

danham
04-04-2010, 08:45 AM
@porky:

Do you by any chance have any pix? My Etymotics are pretty good, with around 32 db attenuation, but not as comfortable as I'd like. If I could do the pen mod on some foam plugs it would be great, but my early attempts failed.

-dan

buzzboy
04-13-2010, 02:17 AM
I've been using a Redline with a Sony TMR-BT10 to transmit the audio & a Sony DRC-BT15 to receive the audio & a very small set of ear bud speakers.
I get about 4-5 hours of riding time (battery life) which is enough for a day out & I can still have Blueant F4 speakers mounted inside the helmet for the intercom/mobile phone/GPS. The Sony receiver comes with a lanyard so it hangs around my neck inside my jacket and the ear bud speaker wires comes up & out of my jacket collar then into the helmet.

You will also need a mono to stereo adaptor plug.

You do need to turn one either the receiver of transmitter off if you are going to have any long stops or it wont last the full day, you only need to turn one off as the other will automatically switch of when it can no longer see the other.

Works a treat.

GUV.

Thanks for the tips. I looked into your suggestions and found it to be a great solution. I'm running a Redline on my bike using a wire from the RD (routed under the tank and out the front of the seat). The ear bud runs through my jacket and connects at my waist. Not bad, but not possible when using one piece leathers and must be disconnected when dismounting. I'll be incorporating a Scala system for phone/bike to bike/RD. Just connect receiver to the Scala input. Seems simple, clean and functional. (I even have a remote visual device for the RD as the Scala prioritizes phone and intercom before the RD). We'll see how it works... Open to suggestions. Thanks.

COGnosticator
04-13-2010, 04:54 AM
[quote=GUV;697589]I've been using a Redline with a I'll be incorporating a Scala system for phone/bike to bike/RD. Just connect receiver to the Scala input. Seems simple, clean and functional. (I even have a remote visual device for the RD as the Scala prioritizes phone and intercom before the RD). We'll see how it works... Open to suggestions. Thanks.

I have the Q2 and a Redline. I can barely hear the Redline when running the wire from the RD to the Q2. With my BEL RX65 it was loud and I could hear it over music from my Zumo 660. I have ordered the Escort motorcycle wire to see if that helps. If not I guess I will go back to the RX65 on my motorcycle. That would be disappointing for sure. I also have the Marc Parnes visual alert but I can hardly see it in bright daylight. I need to be able to hear the signal and over my music.

buzzboy
04-13-2010, 02:44 PM
[quote=GUV;697589]I've been using a Redline with a I'll be incorporating a Scala system for phone/bike to bike/RD. Just connect receiver to the Scala input. Seems simple, clean and functional. (I even have a remote visual device for the RD as the Scala prioritizes phone and intercom before the RD). We'll see how it works... Open to suggestions. Thanks.

I have the Q2 and a Redline. I can barely hear the Redline when running the wire from the RD to the Q2. With my BEL RX65 it was loud and I could hear it over music from my Zumo 660. I have ordered the Escort motorcycle wire to see if that helps. If not I guess I will go back to the RX65 on my motorcycle. That would be disappointing for sure. I also have the Marc Parnes visual alert but I can hardly see it in bright daylight. I need to be able to hear the signal and over my music.

Hmm, that's disappointing. With the volume up on the Q2 and the redline it still wasn't enough? I guess I may have to run the mono earbud in one ear? This is getting complicated. Have you tried the Q2 with a phone or bike to bike? Thanks for the input, much appreciated!

COGnosticator
04-16-2010, 04:05 AM
[QUOTE=buzzboy;704340
Hmm, that's disappointing. With the volume up on the Q2 and the redline it still wasn't enough? I guess I may have to run the mono earbud in one ear? This is getting complicated. Have you tried the Q2 with a phone or bike to bike? Thanks for the input, much appreciated![/QUOTE]

I can hear my phone great, running through my Zumo 660 and talking to my wife (she rides her own bike) I can hear fine. I can also hear the mp3 run through the 660. I had no problem with the RX65 with volume either, just the Redline. I have received the motorcycle wire, but my bike is in the shop for another week so I cannot try out the volume with the new wire until I get it back.

GUV
04-20-2010, 03:13 AM
[QUOTE 704340
I can hear my phone great, running through my Zumo 660 and talking to my wife (she rides her own bike) I can hear fine. I can also hear the mp3 run through the 660. I had no problem with the RX65 with volume either, just the Redline. I have received the motorcycle wire, but my bike is in the shop for another week so I cannot try out the volume with the new wire until I get it back.[/QUOTE]

I found that the quality of the audio from the 660 during music playback was crap compared to my Nokia N97, the only prob with the phone being used for music is that it eats the batt in about 2 hours of continuous play.
How is you 660 for audio quality?

GUV.

kawasaki2008
06-04-2010, 01:30 AM
i aslo have a zx900 that needs some countermeasures
i would install laser jammers and pass on the detector trying to drive and look at the detector all the times going to get you killed

danham
06-04-2010, 10:40 AM
i aslo have a zx900 that needs some countermeasures
i would install laser jammers and pass on the detector trying to drive and look at the detector all the times going to get you killed

That's why a good audio alert system, such as the V1 has, is essential.

-dan

mrmagloo
08-09-2010, 03:23 PM
Any V1 install pics/tips?

porky786
10-19-2010, 08:58 PM
@porky:

Do you by any chance have any pix? My Etymotics are pretty good, with around 32 db attenuation, but not as comfortable as I'd like. If I could do the pen mod on some foam plugs it would be great, but my early attempts failed.

-dan

Wow , 6months late , better than never. The best howard light plug to play with are the medium blunt end Orange type. The ones that are skinny, useless to me.

For the last several months I've been using Radio shack foam replacemnts which are as good or better( id go that route). So $14 for 3 sets. I'm normally on a bike for 4 to 5 hour non stop stents. Thay fit my jvc marshmellows. Another thing i find plastic body ear buds , are less noisy than aluminum.

I've been running a wire to the helmet for 2 years, I've thought of installing my external speaker that came with my STI.

I just havent had the gumption to blast the alrms in open air, im sure it would be loud enough though.

I gues until you try it you dont know, but being connected to wires does have its drawbacks.

the radio shack ones are better than the rigged howard light set up

danham
10-20-2010, 12:34 PM
Thanks porky.

I've tried various plugs similar to the JVCs you mention and none of them come close to the external noise filtering of the Etymotics.

If you do a good job of wiring up an aux jack, you can eliminate 90 percent of the hassle of running a wire. I have a Belkin Rockstar passive mixer whose female input sticks out under my bodywork near the forward edge of the seat. So I can run my Ety wire inside my jacket and plug in easily, leaving no exposed wire to whip around in the wind and cause trouble.

My V1 is set to give very soft beeps on mute and gives me plenty of warning without drowning out the spoken directions from my nuvi 760.

-dan

roninmd
10-25-2010, 02:27 AM
Cardo BTA II - Cellular phone Bluetooth adapter

http://ecx.images-amazon.com/images/I/21N1QCIWNGL._SL500_AA300_.jpg

hook that up to the output from your rockstar mixer.

danham
10-25-2010, 08:23 AM
Cardo BTA II - Cellular phone Bluetooth adapter

hook that up to the output from your rockstar mixer.

It looked interesting, but I don't understand how it would help my setup. Right now I get all of the following through my Rockstar and Etymotics: incoming cell rings and voice, GPS directions, music, V1 alerts. So what would the BTA do? My cell is already in the loop via bluetooth to my GPS (though to talk I have to speak into my GPS, so have to pull over, but that's much safer anyway).

To me the only role for BT would be to eliminate the wire from the Rockstar to my helmet, but that raises other issues, such as how to block road noise and still hear all of the above without putting bulky hardware in there. The BTA does not appear to address this.

-dan

zr1
12-07-2010, 12:50 AM
I have the H.A.R.D. alert LED in my helmet sometimes. It works as advertised, but when it flashes, I have to then look down to see what the RD is doing. When riding out of town, it works great, but in the city, I get too many falses on my V955 from Circle K and such.

I've since gone audio for my alerts and just mix in the RD with the MP3 player or nothing and wear the ER-6i's (they're fantastic). But now the RD audio + voice alert lets me know what's up.