PDA

View Full Version : semi OT: license plate paint



marlinspike
03-07-2005, 03:45 PM
As my plate soaks in rubbing alcohol to get rid of the pink tinge I got from earlier incomplete VEIL removals, I notice that the black lettering it also starting to wear away. Does anybody know what type of paint I should use to repaint the lettering...though now that I think about it, I could just put a few extra layers of VEIL on the letters.
Richard

marlinspike
03-07-2005, 03:59 PM
Ok, soaking your plate in rubbing alcohol may not be a good idea. The pink wouldn't come off so I started rubbing aggressively with a paper towel soaked in rubbing alcohol, and that's taking the pink and all the metalic reflective stuff off. We'll see how this looks when I'm done I guess.
Richard

brick
03-07-2005, 04:16 PM
Ehh...you didn't want the reflective stuff anyway.

You might try modeling enamel from any good hobby shop. It's not water soluble and you can get it in any color you can imagine. You stand a good chance of matching the original paint. I imagine the Veil on top would keep it from wearing too quickly.

marlinspike
03-07-2005, 04:22 PM
Well, sure I dont' want the reflective stuff, but without it, it looks a little funny, and I don't know how I'm going to get it all off without also rubbing off the writing "Maryland." We'll see...this is gonna take some time.
Richard

marlinspike
03-07-2005, 05:27 PM
Ok, this is aweful. Like I always say everything bad happens to me. I couldn't get the reflective stuff to come off uniformly. I hope things would blend together after applying VEIL but they haven't, so I guess I'll try again. I really don't want to have to get new plates cause I like my plate number.
Richard

marlinspike
03-07-2005, 06:04 PM
Well, I've got it better...but to be totally candid, if I knew the plate would turn out like this I would have just decided to take my chances with laser. Right now I'm waiting to hear back if there is any way to get a plate replated (since I've already been told there is no way to get the same plate number). If they say know I'm going to write my Congressman and see if he can get my plate repainted.
Richard

Veil Guy
03-07-2005, 08:57 PM
marlinspike,

the moral of this story is to use a plate cover when at all possible (as we recommend in the manual) especially when white/light plates are worn due to age.

we will continue to try to eliminate this effect (this was more apparent in the earlier versions of VEIL) with future generations of VEIL.

will make it right for you, in the meantime...

the veil guy 8)

marlinspike
03-07-2005, 09:03 PM
Yeah, that is the moral of the story I do believe. Is retroreflective paint available in the free market or just to the state? If my congressman fails me I bet I could find a paint shop to paint it...if the paints can be found.
Richard

Veil Guy
03-07-2005, 09:19 PM
personally i would not use retro-reflective paint.

this kind of paint can increase by 2 magnitudes of order (100x) the amount of reflected light, i believe.

the newer plates appear to have a (3m?) film that is either retroreflective and/or diamond-etched to enhance reflectivity.

the veil guy 8)

marlinspike
03-07-2005, 09:56 PM
That might be what this plate had. It was like a shiny metal layer on top of the white paint of the plate.
Richard

Veil Guy
03-07-2005, 10:02 PM
Likely.

3M makes a retro-reflective material for this purpose.

http://products3.3m.com/catalog/us/en001/manufacturing_industry/packaging/node_M3DCWH6GGJbe/root_GST1T4S9TCgv/vroot_GSS0K4MVF7ge/gvel_XC0M33LS6Bgl/theme_us_packaging_3_0/command_AbcPageHandler/output_html

If you notice, some of this material apparently increases reflectiviy by almost three magnitudes or order (1000x).

Incredible and definately a friend to laser enforcement!!!

the veil guy 8)

SETITOFF
03-08-2005, 05:56 AM
Well, I've got it better...but to be totally candid, if I knew the plate would turn out like this I would have just decided to take my chances with laser. Right now I'm waiting to hear back if there is any way to get a plate replated (since I've already been told there is no way to get the same plate number). If they say know I'm going to write my Congressman and see if he can get my plate repainted.
Richard

If I were you I wouldn't worry about it. The appearance came from normal "wear and tear". But I'm sure you're saying you want your plate to look good as you want your car to also. Look at it this way, you've just stealthified your plate from laser :D

Veil Guy
03-08-2005, 06:55 AM
marlinspike,

did you get my private pm with a possible solution?

the veil guy 8)

marlinspike
03-08-2005, 10:40 AM
You mean the e-mail about the vanity plate with the same number and relinquishing my current plate. That may work. Tomorrow when I have some free time I'm gonna call my congressman's office. Being of the same party, I think I might be able to get something out of constituent services.
Richard

Veil Guy
03-10-2005, 02:22 PM
Which ever way you go, consider selecting a MD plate that is not retro-reflective.

Yesterdary, I got to PA plates that are black and non-reflective!

I'll post a pic sometime in the near future.

Remember, the darker that plate the better.

The Veil Guy 8)

brick
03-10-2005, 03:13 PM
DARE plates?

Veil Guy
03-10-2005, 03:24 PM
You betcha!

The Veil Guy 8)

marlinspike
03-10-2005, 03:48 PM
The MVA said I am actually allowed to repaint my plate. They said it would be illegal normally, but since my plate is old and I'm improving legibility by repainting it, as long as I maintain the original colors I'm ok.
Richard