View Full Version : Tips for veil...
sethy
03-07-2005, 04:39 PM
Hey everyone. I have offically used a full can of veil applying it all to my car. After about 10 or so tries, I got the hang of it.
I found out the easiest way to apply the veil w/o streaks, is shake the can, open the lid, and dab a sponge on the lid and spread that around in long strokes.
To remove veil, use windex. Spray it and let it sit there for about 10 seconds, it comes off with an easy swipe. This works SOOO much better then rubbing alcohol.
happya$$
03-07-2005, 04:44 PM
What do you use to remove Veil, "Windows" what the heck is that?
marlinspike
03-07-2005, 04:47 PM
Methinks he meant windex.
Richard
Veil Guy
03-07-2005, 08:12 PM
I didn't think windex had the minerals to do it.
Good to know Sethy.
The Veil Guy 8)
marlinspike
03-07-2005, 08:35 PM
Windex will do it off of glass, but did nothing to the purple residue on my plate. It took alcohol to touch that.
Richard
Veil Guy
03-07-2005, 08:40 PM
Would you pm me your S/N I would like to know what rev of Veil you had.
Thanks.
The Veil Guy 8)
sethy
03-07-2005, 11:07 PM
sure thing, im gonna have to dig through the trash, but anythin for the veil guy :) sorry about my spelling, I meant to say windex...
Veil Guy
03-07-2005, 11:28 PM
this question was more to marlinspike which i got from him.
the serial number is on the holgraphic label on the side of the out container and is laser etched.
don't tell me you threw out that beautiful outer container?
that was expensively designed to be a keeper and to store things...
the veil guy 8)
SETITOFF
03-08-2005, 05:45 AM
Hey everyone. I have offically used a full can of veil applying it all to my car. After about 10 or so tries, I got the hang of it.
I found out the easiest way to apply the veil w/o streaks, is shake the can, open the lid, and dab a sponge on the lid and spread that around in long streaks.
To remove veil, use windex*. Spray it and let it sit there for about 10 seconds, it comes off with an easy swipe. This works SOOO much better then rubbing alcohol.
Sethy, how long had the Veil set before you cleaned it off with the *windex*?
sethy
03-08-2005, 08:18 AM
Hey everyone. I have offically used a full can of veil applying it all to my car. After about 10 or so tries, I got the hang of it.
I found out the easiest way to apply the veil w/o streaks, is shake the can, open the lid, and dab a sponge on the lid and spread that around in long streaks.
To remove veil, use windex*. Spray it and let it sit there for about 10 seconds, it comes off with an easy swipe. This works SOOO much better then rubbing alcohol.
Sethy, how long had the Veil set before you cleaned it off with the *windex*?
I have had it there for about a week. I sprayed it with windex and let it sit for about 10 seconds and then wiped it off with ease.
My Serial: BE100074
Bob I have a thought, My 300E has some clear stick on plastic headlight protectors something like the stuff you put on your school books when you were a kid. What say i take it off and put the contents of my new can of veil (which is on its way from 12000 miles away :lol: )on my head lights leaving about 1 cm around of the outside edge of the light clean. Then get some new plastic protector head light covers (stick on ones not the click in jobs) and cover the head lights and veil forever making sure to seal the outside edge so no water gets in!! Will i have the veil that never ever has to be replaced!!!!. Now this could be a dream but do you guys think its a go or no?
Veil Guy
03-17-2005, 08:54 AM
I posted in the public forum Ghz1 for everyone to view, as well.
Interesting thought but a couple of things:
Once VEIL thoroughly dries, stone debris and not rain is the long-term problem as the film is very water resistant.
If these "covers" are shiny or glossy then the performance of VEIL will be diminished somewhat due to the glossiness. If not and they are sufficiently "flat" then perhaps you can try it.
Its been my actual experience that VEIL lasts quite a bit longer than 6-9 months but we tended to be conservative with our statements until we get a lot more impirical data from actual VEIL's users around the world.
Thanks and keep me posted on your experiences!
Bob.
nvr2fast
03-26-2005, 09:55 PM
Hey everyone. I have offically used a full can of veil applying it all to my car. After about 10 or so tries, I got the hang of it.
I found out the easiest way to apply the veil w/o streaks, is shake the can, open the lid, and dab a sponge on the lid and spread that around in long strokes.
To remove veil, use windex. Spray it and let it sit there for about 10 seconds, it comes off with an easy swipe. This works SOOO much better then rubbing alcohol.
Sethy... how was it? Did it really make your car invisible to laser? :twisted:
Veil Guy
03-26-2005, 11:07 PM
nvr2fast,
I know you directed this question to Sethy - whom I am sure will respond - but I don't claim that VEIL makes your car, truck, or motorcycle "invisible" to laser.
To do that would be misleading and inaccurate and would suggest that VEIL would completely jam to gun in all cases - which is not true.
VEIL will, however - particularly on medium to darker coloured vehicles - make a noticeable dent in the effective targeting range of laser providing you the time to slow down and avoid a laser speeding ticket - provided that you have a good laser/radar detector that's properly mounted and are attentive to its alerts.
The VEIL (http://www.laserveil.com/) Guy 8)
sethy
03-27-2005, 01:52 AM
Sethy... how was it? Did it really make your car invisible to laser? :twisted:
Well me being the lucky one, I live in a state that id say is 90% laser on the highways. I have used the combo of veil + a blinder, and I have been impressed with both. I say this for many reasons. I have had 2 encounters with laser, but there is a catch :) Let me also state, that I have a light silver colored car, which is easier to get a reading on then a darker car.
One encounter alerted the blinder. I was not wearing a front license plate, so I knew that the cop had targetted my headlight (which was coated with veil). I was going about 30 over, (rediculous speed limit) when the blinder alerted me, and the cop was about 700 feet out, I slowed down and the cop stayed put. The only thing is the next week- I learned that my blinder was mounted WAY out of wack! the sensors were pointed up at about a 10 degree angle, which means that the jamming capability was that of a rocky mountain jammer, but I believe it could still detect the laser (why the blinder alerted me of coarse). The jammer is also set back a little ways in my car to keep it hidden. I know that this will hinder its preformance a bit, but I believed that it wouldn't be a big enough difference to matter. After this encounter I dont know whether to credit the blinder or the veil, but in all the circumstances, im sure the veil was the champ.
2nd encounter was just this passed weekend. A cop was about 600-800 feet out, and over the crest of a hill. I was going about 90, and when I saw him & freaked. I hit the brakes and he just sat there. There was a car behind me a little ways in the lane to the right of me. After I came to the speed limit, he came over the hill. Thats when the red & blue lit up and HE got busted. (I thought he was comin after me at first) I believe he couldn't get a reading on me, so he switched to the car that was in the process of passing me.
Also a note from a friend of mine- he helped me install my blinder, so I veiled his car. He told me that he was going 70 in a 55 on his way to pick up his gf when he saw a state trooped parked in a speed trap (always use laser in this area) He hit the brakes and the cop stayed put. My friend credited 100% of this to the veil. He told me as he came back not 2 minutes later accross that same road, the cop had a van pulled off to the side.
Does veil make your car 100% invisible to laser? I think of it as wearing a condom. It's probibally not always 100% but its GREAT protection! :P But the fact that is, I speed, I cant mount my blinders worth a damn, and the cops are not pulling me over. I believe that veil is a solid investment that you will not regret.
FailedSenses
03-27-2005, 07:45 AM
Does veil make your car 100% invisible to laser? I think of it as wearing a condom. It's probibally not always 100% but its GREAT protection! :P
That was an awesome statement, let me tell you. I'm really considering getting VEILed now (not because of Sethy's comment but because of the apparent usefulness of the product haha) :)
happya$$
03-27-2005, 07:50 AM
Oh yeah I will be the first one to tell you that Veil is magic. I will ALWAYS own Veil and the sky is the limit for this gem of a product. No matter what kind of laser out there, no matter what frequency, laser is still light and Veil absorbs it like kitty litter does piss and motor oil :) It will NEVER go obsolete
nvr2fast
03-28-2005, 05:34 AM
Are there different revisions of Veil, or are they all the same?!
BiGeAsYgUy
03-28-2005, 07:49 AM
I believe that the old Veil didn't work as well as the new but you should check with the VeilGuy about that.
Veil Guy
03-28-2005, 08:24 AM
Since our first public release of the product we have made several improvement/revisions - mainly aesthetic in nature - and will continue to do so without sacrificing performance.
In otherwords, individuals who own an earlier formulation should not feel compelled to purchase new product with the expectation of any real improvements
VEIL has been thoroughly tested and revised even prior to its first public release which occured shortly before the '04 testing of SML.
In '03 we tested VEIL with SML to confirm that we had it right. We did this [i]prior to releasing the product to the marketplace because we didn't want our customers to be guinea pigs. Between '03 and '04 tests we did make some performance gains as evidenced in the '04 test results, but these occured before product one was sold.
We wanted any kinks/issues to be thoroughly worked out before releasing it to the marketplace - we wouldn't have it any other way!
The Veil Guy 8)