PDA

View Full Version : Dust and other debris



Crash
03-12-2005, 07:55 AM
How does the road dust, accumulated over time, affect the jamming and receiving capability of a jammer? The reason IŽm asking is because IŽd love to keep a jammer concealed under a nice layer of dust, as long as it doesnŽt affect its performance.

stealthJamal
03-12-2005, 11:08 AM
Dust and Dirt will diminish the capabilities of the laser jammer. I always keep mine clean. I wipe them clean usually every other day. Keep a bottle of Windex and some rags in my car.

laserblaster
03-28-2005, 06:25 AM
it would act the same as a dirty windscreen.......

if your device was emitting radar it wouldnt matter!

but because its laser and its light it doesnt pass through dust or any other thing infront of it!!

letting them get dirty could mean you never get a laser warning and if you dont get that it wont jam, even if you get a laser warning there may be enough dust dirt on the len for it not to jam!!!

the cleaner the better!!

nvr2fast
03-28-2005, 09:56 AM
Could we put a layer of sticky tape on the front of each lens to protect it, then when the tape gets damaged, just peel it off and put in a new layer?

Or perhaps plastic "Glad Wrap" would work as well? Or something else to protect the lens?

Radar Roy
03-28-2005, 12:15 PM
I would recommend just getting a new lens, they are not expensive

We have them for the Blinder here

http://www.radarbusters.com/products/blinder/Repalcement-Lens.asp

laserblaster
03-29-2005, 06:37 PM
you'd have to test it out..... i dont know if it would affect laser detection / jamming performance...

it would be good to get a protector for the len's

you could always ask the manufacturer if tape or a plastic covering would affect performance!

i aways say inventor knows best!

you could track down gordon gould! :lol: he invented the laser before all the other scientists! he wasnt lucky enough to patent it earlier!! :cry:

nvr2fast
03-30-2005, 12:15 AM
you'd have to test it out..... i dont know if it would affect laser detection / jamming performance...

it would be good to get a protector for the len's

you could always ask the manufacturer if tape or a plastic covering would affect performance!

i aways say inventor knows best!

you could track down gordon gould! :lol: he invented the laser before all the other scientists! he wasnt lucky enough to patent it earlier!! :cry:

Where is laserjamal or the blinderguyt?!!?!

SmaartAasSaabr
03-30-2005, 03:58 PM
I'm actually working on making a optically clear plastic cover for the lenses - kinda like some scotch tape however much thicker and better. Maybe I can fly over to SML to see if it works good? (don't have no lidars up here :x )

brick
03-30-2005, 04:24 PM
3M makes a clear stone guard film that might do the trick. It's like clear packing tape but much thicker.

SmaartAasSaabr
03-30-2005, 05:11 PM
Yeah but mine is exact fit and prepackaged... and probably cheaper considering how much 3M stuff is these days...