PDA

View Full Version : How to Get License Plates to Work FOR You!



Veil Guy
03-12-2005, 03:20 PM
As many of you are already aware, most states in the US, require the use of front license plates.

Many of the state newer plates are retro-reflective in nature. In these cases the reflective magnifying effects of these plates can be almost three magnitudes of order greater than a standard non-retro-reflective plate (about 900x!)

Retro-reflective plates are bad for laser stealthiness and require:

1) Effective Laser Plate Cover (Veil or otherwise)
2) Laser Jammer Placement in Close Proximity

For those individuals required to use a front plate, I would suggest that you explore state plate alternative offerings from your state DOT.

For example, in PA, there are several alternative plates available which include:

DARE (mostly black, non-retro-reflective)
PZ (PA zoological)
POH (Railroad)
WRCF (Otter)

This plates are darker coloured and non-retroflective which would serve its owners with a better (less-targetable) source.

Another step that can be taken is to utilize a black/plastic plate holder/bracket. This often obscure 10-20% of the plate area and would further reduce the targetability of your vehicle front or rear whether [or not] you use VEIL, a laser jammer, or both.

Check with your state's DOT to see what your options are. Many of these plates come with a nominal cost - a small price to pay to reduce your laser signature from the get go.

Happy and Safe Motoring!

http://www.laserveil.com/images/dare-plate-untreated.jpg

The Veil Guy 8)

brick
03-12-2005, 03:43 PM
Retro-reflective plates are bad for laser stealthiness and require:

1) Effective Laser Plate Cover (Veil or otherwise)
2) Laser Jammer Placement in Close Proximity



So...Veil+retroreflective plate sans jammer = not protected? What kind of plate was used in the SML tests of Veil alone?

Veil Guy
03-12-2005, 03:54 PM
Texas retro-reflective plate and PA retro-reflective standard issue plates.

The plate in the photo was just acquired last week. I will continue to test with worst-case scenarios to stay on the conservative-side of our performance claims.

The Veil Guy 8)

brick
03-12-2005, 04:00 PM
Texas retro-reflective plate and PA retro-reflective standard issue plates.

The plate in the photo was just acquired last week. I will continue to test with worst-case scenarios to stay on the conservative-side of our performance claims.

The Veil Guy 8)

Gotcha. Thanks for the quick reply. To me this indicates that folks with a non-retroreflective plate might see effective targeting distances more like those given for the no-plate test. Good news! For a second there I was getting worried...but no more.

Veil Guy
03-12-2005, 04:32 PM
I am going to be conducting some extensive laser testing in the coming weeks which will include the use of one of these plates as compared to the regular white/light retro-reflective plates and I'll be able to determine precisely what kind of difference they make treated and untreated.

The Veil Guy 8)